Skip to content

Electricity, gas, temperature and humidity monitor and base station with wireless RF communication

Notifications You must be signed in to change notification settings

Taransay/taransay

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

39 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Taransay home monitoring hardware and firmware

This is a series of wireless (433 MHz) electricity, gas, temperature and humidity monitors, electricity switches and RGB(W) controllers and base station, with interoperability with Home Assistant. It uses low cost RF modules from HopeRF for intercommunication, avoiding the security implications of having several seldomly-updated WiFi modules on your home network. The range is also far greater.

The hardware and firmware designs are loosely based on those of the emonTx, emonTH (both OpenEnergyMonitor) and Moteino (LowPowerLab).

The firmware is designed to talk to Home Assistant via the Taransay base station, which is a small transceiver that plugs into a Raspberry Pi or similar and talks to an instance of Taransay Data Forwarder over serial. This way, you just need to keep your Raspberry Pi updated and not several distributed devices.

Status

The hardware and firmware all works, though there are few instructions for getting it all to work, so if you happen to want to use any of this it's best to get in touch.

Credits

Sean Leavey https://github.com/SeanDS

About

Electricity, gas, temperature and humidity monitor and base station with wireless RF communication

Resources

Stars

Watchers

Forks

Packages

No packages published