[SenecHome] Add writeable Charging Modes

bundles/org.openhab.binding.senechome/README.md

@@ -7,6 +7,8 @@ In addition you can switch off devices if the power consumption is getting highe
 
 Examples: Lights, pool filters, wash machines, ...
 
+Also allows for turning the battery into safe charging mode or storage mode.
+
 ## Supported Things
 
 | Thing type id | Name                                                 |
@@ -19,6 +21,7 @@ Examples: Lights, pool filters, wash machines, ...
 - not equipped battery packs will return 0 for all ...Pack channels
 - currently channels for the first wallbox are implemented (senec could handle 4 wallboxes)
 - Senec disables http access at ~30.08.2023
+- Lithium Storage Mode is intended (according to the manual) for disassembly and transport. It is untested if it has any side effects.
 
 ## Thing Configuration
 
@@ -57,6 +60,8 @@ The property `limitationTresholdValue` is used as threshold for channel `powerLi
 | batteryFuelCharge             | percent        | Fuel charge of your battery (0 - 100%)                                   |
 | systemState                   |                | Text describing current action of the senec home system (e.g. CHARGE)    |
 | systemStateValue              |                | Value describing current action of the senec home system (e.g. 14)       |
+| safeChargeMode                | OFF/CHARGE/    | In safeChargeMode, the battery will try to fill as quickly as possible   |
+|                               | STORAGE        | in liStorageMode, the battery will try to reach 25% SOC                  |
 | gridPower                     | watt           | Grid power level, negative for supply, positive values for drawing power |
 | gridPowerDraw                 | watt           | Absolute power level of power draw, zero while supplying                 |
 | gridPowerSupply               | watt           | Absolute power level of power supply, zero while drawing                 |
@@ -135,6 +140,7 @@ Number SenecGridVoltagePh2       "Voltage Level on Phase 2 [%d V]"            <e
 Number SenecGridVoltagePh3       "Voltage Level on Phase 3 [%d V]"            <energy> { channel="senechome:senechome:pvbattery:gridVoltagePhase3" }
 Number SenecGridFrequency        "Grid Frequency [%.2f Hz]"                   <energy> { channel="senechome:senechome:pvbattery:gridFrequency" }
 Number SenecBatteryVoltage       "Battery Voltage [%.1f V]"                   <energy> { channel="senechome:senechome:pvbattery:batteryVoltage" }
+String SenecBatteryChargeMode    "Battery Charge Mode [%s]"                            { channel="senechome:senechome:pvbattery:chargeMode" }
 ```
 
 ## Sitemap
@@ -166,6 +172,7 @@ Text label="Power Grid"{
         Default item=SenecGridVoltagePh3
         Default item=SenecGridFrequency
         Default item=SenecBatteryVoltage
+        Default item=SenecBatteryChargeMode
     }
 }
 ```

bundles/org.openhab.binding.senechome/src/main/java/org/openhab/binding/senechome/internal/SenecHomeApi.java

@@ -40,6 +40,7 @@
  *
  * @author Steven Schwarznau - Initial contribution
  * @author Robert Delbrück - Update for Senec API changes
+ * @author Lukas Pindl - Update for writing to safeChargeMode
  *
  */
 @NonNullByDefault
@@ -72,6 +73,39 @@ public void setHostname(String hostname) {
      */
     public SenecHomeResponse getStatistics()
             throws TimeoutException, ExecutionException, IOException, InterruptedException, JsonSyntaxException {
+
+        String dataToSend = gson.toJson(new SenecHomeResponse());
+        ContentResponse response = postRequest(dataToSend);
+        String responseString = response.getContentAsString();
+        return Objects.requireNonNull(gson.fromJson(responseString, SenecHomeResponse.class));
+    }
+
+    /**
+     * POST json, to lala.cgi of Senec webinterface to set a given parameter
+     *
+     * @return boolean, wether or not the request was successful
+     */
+    public boolean setValue(String section, String id, String value) {
+        String dataToSend = "{\"" + section + "\":{\"" + id + "\":\"" + value + "\"}}";
+        try {
+            postRequest(dataToSend);
+            return true;
+        } catch (TimeoutException | ExecutionException | IOException | InterruptedException e) {
+            return false;
+        }
+    }
+
+    /**
+     * helper function to handle the actual POST request to the webinterface
+     *
+     * @return object of type ContentResponse, the response received to the POST request
+     * @throws TimeoutException Communication failed (Timeout)
+     * @throws ExecutionException Communication failed
+     * @throws IOException Communication failed
+     * @throws InterruptedException Communication failed (Interrupted)
+     */
+    private ContentResponse postRequest(String dataToSend)
+            throws TimeoutException, ExecutionException, IOException, InterruptedException {
         String location = hostname + "/lala.cgi";
         logger.trace("sending request to: {}", location);
 
@@ -80,13 +114,11 @@ public SenecHomeResponse getStatistics()
         request.header(HttpHeader.CONTENT_TYPE, MimeTypes.Type.APPLICATION_JSON.asString());
         ContentResponse response = null;
         try {
-            String dataToSend = gson.toJson(new SenecHomeResponse());
             logger.trace("data to send: {}", dataToSend);
             response = request.method(HttpMethod.POST).content(new StringContentProvider(dataToSend))
                     .timeout(15, TimeUnit.SECONDS).send();
             if (response.getStatus() == HttpStatus.OK_200) {
-                String responseString = response.getContentAsString();
-                return Objects.requireNonNull(gson.fromJson(responseString, SenecHomeResponse.class));
+                return response;
             } else {
                 logger.trace("Got unexpected response code {}", response.getStatus());
                 throw new IOException("Got unexpected response code " + response.getStatus());

bundles/org.openhab.binding.senechome/src/main/java/org/openhab/binding/senechome/internal/SenecHomeBindingConstants.java

@@ -20,6 +20,7 @@
  * used across the whole binding.
  *
  * @author Steven Schwarznau - Initial contribution
+ * @author Lukas Pindl - Update for writing to safeChargeMode
  */
 @NonNullByDefault
 public class SenecHomeBindingConstants {
@@ -49,6 +50,7 @@ public class SenecHomeBindingConstants {
     public static final String CHANNEL_SENEC_BATTERY_FUEL_CHARGE = "batteryFuelCharge";
     public static final String CHANNEL_SENEC_BATTERY_VOLTAGE = "batteryVoltage";
     public static final String CHANNEL_SENEC_BATTERY_CURRENT = "batteryCurrent";
+    public static final String CHANNEL_SENEC_CHARGE_MODE = "chargeMode";
 
     // SenecHomeGrid
     public static final String CHANNEL_SENEC_GRID_POWER = "gridPower";
@@ -107,4 +109,9 @@ public class SenecHomeBindingConstants {
     public static final String CHANNEL_SENEC_WALLBOX1_CHARGING_CURRENT_PH2 = "wallbox1ChargingCurrentPhase2";
     public static final String CHANNEL_SENEC_WALLBOX1_CHARGING_CURRENT_PH3 = "wallbox1ChargingCurrentPhase3";
     public static final String CHANNEL_SENEC_WALLBOX1_CHARGING_POWER = "wallbox1ChargingPower";
+
+    // Charge Mode Definitions
+    public static final String STATE_SENEC_CHARGE_MODE_OFF = "OFF";
+    public static final String STATE_SENEC_CHARGE_MODE_CHARGE = "CHARGE";
+    public static final String STATE_SENEC_CHARGE_MODE_STORAGE = "STORAGE";
 }

bundles/org.openhab.binding.senechome/src/main/java/org/openhab/binding/senechome/internal/SenecHomeHandler.java

@@ -58,6 +58,7 @@
  *
  * @author Steven Schwarznau - Initial contribution
  * @author Erwin Guib - added more channels, added some convenience methods to reduce code duplication
+ * @author Lukas Pindl - Update for writing to safeChargeMode
  */
 @NonNullByDefault
 public class SenecHomeHandler extends BaseThingHandler {
@@ -101,7 +102,32 @@ public void handleCommand(ChannelUID channelUID, Command command) {
             logger.debug("Refreshing {}", channelUID);
             refresh();
         } else {
-            logger.trace("The SenecHome-Binding is a read-only binding and can not handle commands");
+            String channelID = channelUID.getId();
+
+            logger.trace("Channel: {}", channelID);
+            switch (channelID) {
+                case CHANNEL_SENEC_CHARGE_MODE: {
+                    if (command instanceof StringType stringCommand) {
+                        logger.trace("Command: {} ", stringCommand.toString());
+                        if (stringCommand.toString().equals(STATE_SENEC_CHARGE_MODE_OFF)) {
+                            senecHomeApi.setValue("ENERGY", "SAFE_CHARGE_PROHIBIT", "u8_01");
+                            senecHomeApi.setValue("ENERGY", "LI_STORAGE_MODE_STOP", "u8_01");
+                        } else if (stringCommand.toString().equals(STATE_SENEC_CHARGE_MODE_CHARGE)) {
+                            senecHomeApi.setValue("ENERGY", "SAFE_CHARGE_FORCE", "u8_01");
+                            senecHomeApi.setValue("ENERGY", "LI_STORAGE_MODE_STOP", "u8_01");
+                        } else if (stringCommand.toString().equals(STATE_SENEC_CHARGE_MODE_STORAGE)) {
+                            senecHomeApi.setValue("ENERGY", "SAFE_CHARGE_PROHIBIT", "u8_01");
+                            senecHomeApi.setValue("ENERGY", "LI_STORAGE_MODE_START", "u8_01");
+                        }
+                        updateState(channelUID, stringCommand);
+                    }
+                    break;
+                }
+                default: {
+                    logger.warn("Received command on unexpected channel: {}", channelID);
+                    break;
+                }
+            }
         }
     }
 
@@ -186,6 +212,9 @@ private <Q extends Quantity<Q>> void updateQtyStateIfAvailable(String channel, S
             updateQtyState(CHANNEL_SENEC_BATTERY_POWER, response.energy.batteryPower, 2, Units.WATT);
             updateQtyState(CHANNEL_SENEC_BATTERY_CURRENT, response.energy.batteryCurrent, 2, Units.AMPERE);
             updateQtyState(CHANNEL_SENEC_BATTERY_VOLTAGE, response.energy.batteryVoltage, 2, Units.VOLT);
+
+            updateChargeState(CHANNEL_SENEC_CHARGE_MODE, response.energy.safeChargeMode, response.energy.liStorageMode);
+
             updateStringStateFromInt(CHANNEL_SENEC_SYSTEM_STATE, response.energy.systemState,
                     SenecSystemStatus::descriptionFromCode);
             updateDecimalState(CHANNEL_SENEC_SYSTEM_STATE_VALUE, response.energy.systemState);
@@ -314,14 +343,38 @@ protected void updateStringStateFromInt(String channelName, String senecValue,
         }
     }
 
+    protected void updateChargeState(String channelName, String senecValueCharge, String senecValueStorage) {
+        Channel channel = getThing().getChannel(channelName);
+        if (channel != null) {
+            BigDecimal valueCharge = getSenecValue(senecValueCharge);
+            BigDecimal valueStorage = getSenecValue(senecValueStorage);
+            if (valueStorage.intValue() == 1) {
+                updateState(channel.getUID(), new StringType(STATE_SENEC_CHARGE_MODE_STORAGE));
+            } else if (valueCharge.intValue() == 1) {
+                updateState(channel.getUID(), new StringType(STATE_SENEC_CHARGE_MODE_CHARGE));
+            } else {
+                updateState(channel.getUID(), new StringType(STATE_SENEC_CHARGE_MODE_OFF));
+            }
+        }
+    }
+
     protected void updateDecimalState(String channelName, String senecValue) {
         Channel channel = getThing().getChannel(channelName);
         if (channel != null) {
+
             BigDecimal value = getSenecValue(senecValue);
             updateState(channel.getUID(), new DecimalType(value.intValue()));
         }
     }
 
+    protected void updateSwitchState(String channelName, String senecValue) {
+        Channel channel = getThing().getChannel(channelName);
+        if (channel != null) {
+            BigDecimal value = getSenecValue(senecValue);
+            updateState(channel.getUID(), OnOffType.from(value.intValue() == 1));
+        }
+    }
+
     protected <Q extends Quantity<Q>> void updateQtyState(String channelName, String senecValue, int scale,
             Unit<Q> unit) {
         updateQtyState(channelName, senecValue, scale, unit, null);

bundles/org.openhab.binding.senechome/src/main/java/org/openhab/binding/senechome/internal/dto/SenecHomeEnergy.java

@@ -23,6 +23,7 @@
  * Section is "ENERGY"
  *
  * @author Steven Schwarznau - Initial Contribution
+ * @author Lukas Pindl - Update for writing to safeChargeMode
  */
 public class SenecHomeEnergy implements Serializable {
 
@@ -64,11 +65,21 @@ public class SenecHomeEnergy implements Serializable {
      */
     public @SerializedName("STAT_STATE") String systemState;
 
+    /**
+     * Safe Charge Mode Running.
+     */
+    public @SerializedName("SAFE_CHARGE_RUNNING") String safeChargeMode;
+
+    /**
+     * Lithium Storage Mode Running.
+     */
+    public @SerializedName("LI_STORAGE_MODE_RUNNING") String liStorageMode;
+
     @Override
     public String toString() {
         return "SenecHomeEnergy [housePowerConsumption=" + housePowerConsumption + ", inverterPowerGeneration="
                 + inverterPowerGeneration + ", batteryPower=" + batteryPower + ", batteryVoltage=" + batteryVoltage
                 + ", batteryCurrent=" + batteryCurrent + ", batteryFuelCharge=" + batteryFuelCharge + ", systemState="
-                + systemState + "]";
+                + systemState + ", safeChargeMode=" + safeChargeMode + ", liStorageMode=" + liStorageMode + "]";
     }
 }

bundles/org.openhab.binding.senechome/src/main/resources/OH-INF/i18n/senechome.properties

@@ -62,7 +62,8 @@ channel-type.senechome.gridPowerSupply.label = Grid Supply
 channel-type.senechome.gridVoltagePhase1.label = Grid Voltage Phase 1
 channel-type.senechome.gridVoltagePhase2.label = Grid Voltage Phase 2
 channel-type.senechome.gridVoltagePhase3.label = Grid Voltage Phase 3
-channel-type.senechome.houseConsumption.label = House Power Consumption
+channel-type.senechome.houseConsumption.label = House Power Consumption 
+channel-type.senechome.liStorageMode.label = Lithium Storage Mode
 channel-type.senechome.liveBatCharge.label = Live Bat Charge
 channel-type.senechome.liveBatDischarge.label = Live Bat Discharge
 channel-type.senechome.liveEnergyWallbox1.label = Live Wallbox 1 charged Energy
@@ -84,6 +85,7 @@ channel-type.senechome.powerLimitationState.label = Limitation State
 channel-type.senechome.powerMpp1.label = Power MPP1
 channel-type.senechome.powerMpp2.label = Power MPP2
 channel-type.senechome.powerMpp3.label = Power MPP3
+channel-type.senechome.saveChargeMode.label = Save Charge Mode
 channel-type.senechome.systemState.label = System State
 channel-type.senechome.systemStateValue.label = System State Value
 channel-type.senechome.voltageMpp1.label = Voltage MPP1

bundles/org.openhab.binding.senechome/src/main/resources/OH-INF/thing/thing-types.xml

@@ -32,6 +32,7 @@
 			<channel id="batteryFuelCharge" typeId="batteryFuelCharge"/>
 			<channel id="systemState" typeId="systemState"/>
 			<channel id="systemStateValue" typeId="systemStateValue"/>
+			<channel id="chargeMode" typeId="chargeMode"/>
 
 			<!-- SenecHomeGrid -->
 			<channel id="gridPower" typeId="gridPower"/>
@@ -242,6 +243,18 @@
 		<category>Number</category>
 		<state readOnly="true" pattern="%d"/>
 	</channel-type>
+	<channel-type id="chargeMode">
+		<item-type>String</item-type>
+		<label>Safe Charge Mode</label>
+		<category>Text</category>
+		<state readOnly="false" pattern="%s">
+			<options>
+				<option value="OFF">Off</option>
+				<option value="CHARGE">Safe Charge</option>
+				<option value="STORAGE">Lithium Storage</option>
+			</options>
+		</state>
+	</channel-type>
 
 
 	<channel-type id="gridPower">