Skip to content

mporrato/alpine-h700

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

3 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Alpine Linux for the Allwinner H700 SoC

This repository contains a collection of scripts to create a custom Alpine Linux based SD card image bootable on Allwinner H700 based devices.

In the standard configuration, a very basic system is installed, providing a login prompt on /dev/ttyS0, automatic connection to a WiFi netowk on boot and an SSH daemon running.

The scripts have been tested on a Fedora Linux 40 system and the generated image has been tested on an Anbernic RG35XX Plus portable console.

Requirements

The scripts require the following software:

  • make (specifically, GNU Make) to orchestrate the build and track dependencies
  • python3 to run some of the provided scripts; only modules from the standard library are used
  • sgdisk to manipulate GPT partition tables
  • guestfish to manipulate filesystem images without root privileges
  • fakeroot to inject custom configuration files into the rootfs image without root privileges
  • podman to provide an Alpine Linux environment
  • qemu-user-static-aarch64 to enable podman to run aarch64 container images on a different architecture like x86_64

An image of a stock SD card is required in order to extract components that are specific to the H700 SoC that do not have open source alternatives yet; those components are:

  • the SPL
  • the U-Boot bootloader
  • the kernel
  • the kernel's modules
  • various firmware blobs

Preparation

Configuration

Some extra configuration must be provided to connect to a WiFi network and allow SSH connections.

Anything under the config directory will be injected in the rootfs image.

A good staring point would be something like this (replace $ssid and $password with the correct network name and password for your WiFi network):

mkdir -p config/etc/wpa_supplicant
wpa_passphrase '$ssid' '$password' >config/etc/wpa_supplicant/wpa_supplicant.conf
chmod 600 config/etc/wpa_supplicant/wpa_supplicant.conf

mkdir -p config/root/.ssh
cat ~/.ssh/id_*.pub >config/root/.ssh/authorized_keys
chmod 700 config/root config/root/.ssh

Stock SD card image

The scripts expect to find an image of the stock SD card in a file called factory.img in the root of the repository. It can be either an image file or a link to the actual image file or device, as long as the user running the scripts has permission to read it. The name of the image can be overridden by specifying a different path in the FACTORY_IMAGE variable when calling the makefile.

Usage

To build an image, just run:

make

Or, to use a path to the stock image other than the default:

make FACTORY_IMAGE=/tmp/RG35XX+-P-V1.1.3-EN16GB-240614.IMG

The resulting image will be saved to ./artifacts/alpine-h700.img and can be flashed to an SD card, for example, if the card is presented to the system as /dev/sde:

dd if=artifacts/alpine-h700.img of=/dev/sde bs=1M oflag=dsync status=progress

There are other tunable settings: for an exaustive list, see the top of Makefile. Keep in mind that tweaking those values between builds may require forcing a clean build by issuing a make clean.

About

Alpine Linux for the Allwinner H700 SoC

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published