Skip to content

make-software/cep-78-enhanced-nft

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

CEP-78: Enhanced NFT standard

Design Goals

  • DApp developers attempting to create an NFT contract should be able to install the contract as is configured for the specific built-in behavior they want their NFT contract instance to have. Must work out of the box.
  • Reference implementation must be straightforward, clear, and obvious.
  • Externally observable association between Accounts and/or Contracts and NFTs they "own".
  • Should be well documented with exhaustive tests that prove all possible combinations of defined behavior work as intended.
  • Must be entirely self-contained within a singular repo; this includes all code, all tests, all relevant CasperLabs provided SDKs and all relevant documentation.
  • Must support mainstream expectations about common NFT conventions.
  • A given NFT contract instance must be able to choose when created if it is using a Metadata schema conformant with existing community standards or a specific custom schema that they provide.
  • A NFT contract instance must validate provided metadata against the specified metadata schema for that contract.
  • Standardized session code to interact with an NFT contract instance must be usable as is, so that a given DApp developer doesn't have to write any Wasm producing logic for normal usage of NFT contract instances produced by this contract.

New in Version 1.1

The release of version 1.1 for the CEP-78 Enhanced NFT Standard includes the following:

  • Ownership of NFTs issued by a given CEP-78 contract instance are tracked by token id; thus the current owner of any given token by id is available using the owned_by entrypoint. However, some use cases benefit from the ability to ask the reverse question: list all the NFTs from a given contract instance owned by a specific owner.

    • To be able to support this reverse lookup option requires a contract instance to keep track of additional data, which causes higher gas costs for all mints and transfers. The gas cost to ask for any given owner is also unpredictable; as the asker is charged for the appropriate gas cost to read and return a collection that may be empty or may be quite large.

    • The pros and cons of either approach should be considered when installing a new CEP-78 contract. By default, new CEP-78 contract instances will default to the OwnerReverseLookupMode::NoLookup option, which has the lowest operating costs and optimal scaling characteristics. However, the OwnerReverseLookupMode::Complete option can be chosen upon install, which will allow the contract to write the necessary additional data to allow a full lookup by owner.

    • To allow isolation of the additional costs, or tracking individual owners, the reverse lookup mode supports a register entrypoint which is used to register owners prior to minting or receiving a transferred token. In either Assigned or Transferable mode, this register entrypoint can be called by any party on behalf of another party.

  • A single instance of CEP-78 is limited to 1,000,000 tokens maximum.

    • The naming convention for the default named key prefix of a given CEP-78 contract instance has been changed to cep78_<collection_name> with spaces and dashes within the collection name converted to underscores.

    • Version 1.1.1 Added a new modality named NamedKeyConventionMode that dictates the upgrading and installation process, with further information here

    • If an account attempts to install a second CEP-78 contract instance with the same collection name, it will overwrite the NamedKey entry under which the access URef is written. Losing the access URef will prevent the account from adding newer versions, i.e., upgrading that particular instance of CEP-78.

Table of Contents

  1. Modalities

  2. Usage

  3. Installing and Interacting with the Contract using the Rust Casper Client

  4. Test Suite and Specification

  5. Owner Reverse Lookup Functionality

  6. Error Codes

Modalities

The enhanced NFT implementation supports various 'modalities' that dictate the behavior of a specific contract instance. Modalities represent the common expectations around contract usage and behavior. The following section discusses the currently implemented modalities and illustrates the significance of each.

Ownership

This modality specifies the behavior regarding ownership of NFTs and whether the owner of the NFT can change over the contract's lifetime. There are three modes:

  1. Minter: Minter mode is where the ownership of the newly minted NFT is attributed to the minter of the NFT and cannot be specified by the minter. In the Minter mode the owner of the NFT will not change and thus cannot be transferred to another entity.
  2. Assigned: Assigned mode is where the owner of the newly minted NFT must be specified by the minter of the NFT. In this mode, the assigned entity can be either minter themselves or a separate entity. However, similar to the Minter mode, the ownership in this mode cannot be changed, and NFTs minted in this mode cannot be transferred from one entity to another.
  3. Transferable: In the Transferable mode the owner of the newly minted NFT must be specified by the minter. However, in the Transferable mode, NFTs can be transferred from the owner to another entity.

In all the three mentioned modes, the owner entity is currently restricted to Accounts on the Casper network.

Note: In the Transferable mode, it is possible to transfer the NFT to an Account that does not exist.

This Ownership mode is a required installation parameter and cannot be changed once the contract has been installed. The mode is passed in as u8 value to the "ownership_mode" runtime argument.

Ownership u8
Minter 0
Assigned 1
Transferable 2

The ownership mode of a contract can be determined by querying the ownership_mode entry within the contract's NamedKeys.

NFTKind

The NFTKind modality specifies the commodity that NFTs minted by a particular contract will represent. Currently, the NFTKind modality does not alter or govern the behavior of the contract itself and only exists to specify the correlation between on-chain data and off-chain items. There are three different variations of the NFTKind mode.

  1. Physical: The NFT represents a real-world physical item e.g., a house.
  2. Digital: The NFT represents a digital item, e.g., a unique JPEG or digital art.
  3. Virtual: The NFT is the virtual representation of a physical notion, e.g., a patent or copyright.

The NFTKind mode is a required installation parameter and cannot be changed once the contract has been installed. The mode is passed in as a u8 value to nft_kind runtime argument.

NFTKind u8
Physical 0
Digital 1
Virtual 2

NFTHolderMode

The NFTHolderMode dictates which entities on a Casper network can own and mint NFTs. There are three different options currently available:

  1. Accounts: In this mode, only Accounts can own and mint NFTs.
  2. Contracts: In this mode, only Contracts can own and mint NFTs.
  3. Mixed: In this mode both Accounts and Contracts can own and mint NFTs.

If the NFTHolderMode is set to Contracts a ContractHash whitelist must be provided. This whitelist dictates which Contracts are allowed to mint NFTs in the restricted Installer minting mode.

NFTHolderMode u8
Accounts 0
Contracts 1
Mixed 2

This modality is an optional installation parameter and will default to the Mixed mode if not provided. However, this mode cannot be changed once the contract has been installed. The mode is passed in as a u8 value to nft_holder_mode runtime argument.

WhitelistMode

The WhitelistMode dictates if the contract whitelist restricting access to the mint entrypoint can be updated. There are currently two options:

  1. Unlocked: The contract whitelist is unlocked and can be updated via the set variables endpoint.
  2. Locked: The contract whitelist is locked and cannot be updated further.

This WhitelistMode is an optional installation parameter and will be set to unlocked if not passed. However, the whitelist mode itself cannot be changed once the contract has been installed. The mode is passed in as a u8 value to whitelist_mode runtime argument.

WhitelistMode u8
Unlocked 0
Locked 1

Minting

The minting mode governs the behavior of contract when minting new tokens. The minting modality provides two options:

  1. Installer: This mode restricts the ability to mint new NFT tokens only to the installing account of the NFT contract.
  2. Public: This mode allows any account to mint NFT tokens.

This modality is an optional installation parameter and will default to the Installer mode if not provided. However, this mode cannot be changed once the contract has been installed. The mode is set by passing a u8 value to the minting_mode runtime argument.

MintingMode u8
Installer 0
Public 1

NFTMetadataKind

This modality dictates the schema for the metadata for NFTs minted by a given instance of an NFT contract. There are four supported modalities:

  1. CEP78: This mode specifies that NFTs minted must have valid metadata conforming to the CEP-78 schema.
  2. NFT721: This mode specifies that NFTs minted must have valid metadata conforming to the NFT-721 metadata schema.
  3. Raw: This mode specifies that metadata validation will not occur and raw strings can be passed to token_metadata runtime argument as part of the call to mint entrypoint.
  4. CustomValidated: This mode specifies that a custom schema provided at the time of install will be used when validating the metadata as part of the call to mint entrypoint.
CEP-78 metadata example
{
  "name": "John Doe",
  "token_uri": "https://www.barfoo.com",
  "checksum": "940bffb3f2bba35f84313aa26da09ece3ad47045c6a1292c2bbd2df4ab1a55fb"
}
NFT-721 metadata example
{
  "name": "John Doe",
  "symbol": "abc",
  "token_uri": "https://www.barfoo.com"
}
Custom Validated

The CEP-78 implementation allows installers of the contract to provide their custom schema at the time of installation. The schema is passed as a String value to json_schema runtime argument at the time of installation. Once provided, the schema for a given instance of the contract cannot be changed.

The custom JSON schema must contain a top-level properties field. An example of a valid JSON schema is provided. In this example, each property has a name, the description of the property itself, and whether the property is required to be present in the metadata. If the metadata kind is not set to custom validated, then the value passed to the json_schema runtime argument will be ignored.

Example Custom Validated schema
{
   "properties":{
      "deity_name":{
         "name":"deity_name",
         "description":"The name of deity from a particular pantheon.",
         "required":true
      },
      "mythology":{
         "name":"mythology",
         "description":"The mythology the deity belongs to.",
         "required":true
      }
   }
}
Example Custom Metadata
{
  "deity_name": "Baldur",
  "mythology": "Nordic"
}
NFTMetadataKind u8
CEP78 0
NFT721 1
Raw 2
CustomValidated 3

NFTIdentifierMode

The identifier mode governs the primary identifier for NFTs minted for a given instance on an installed contract. This modality provides two options:

  1. Ordinal: NFTs minted in this modality are identified by a u64 value. This value is determined by the number of NFTs minted by the contract at the time the NFT is minted.
  2. Hash: NFTs minted in this modality are identified by a base16 encoded representation of the blake2b hash of the metadata provided at the time of mint.

Since the primary identifier in the Hash mode is derived by hashing over the metadata, making it a content-addressed identifier, the metadata for the minted NFT cannot be updated after the mint. Attempting to install the contract with the MetadataMutability modality set to Mutable in the Hash identifier mode will raise an error. This modality is a required installation parameter and cannot be changed once the contract has been installed. It is passed in as a u8 value to the identifier_mode runtime argument.

NFTIdentifierMode u8
Ordinal 0
Hash 1

Metadata Mutability

The metadata mutability mode governs the behavior around updates to a given NFTs metadata. This modality provides two options:

  1. Immutable: Metadata for NFTs minted in this mode cannot be updated once the NFT has been minted.
  2. Mutable: Metadata for NFTs minted in this mode can update the metadata via the set_token_metadata entrypoint.

The Mutable option cannot be used in conjunction with the Hash modality for the NFT identifier; attempting to install the contract with this configuration raises InvalidMetadataMutability error. This modality is a required installation parameter and cannot be changed once the contract has been installed. It is passed in as a u8 value to the metadata_mutability runtime argument.

MetadataMutability u8
Immutable 0
Mutable 1

BurnMode

The BurnMode modality dictates whether tokens minted by a given instance of an NFT contract can be burnt. This modality provides two options:

  1. Burnable: Minted tokens can be burnt.
  2. NonBurnable: Minted tokens cannot be burnt.
BurnMode u8
Burnable 0
NonBurnable 1

This modality is an optional installation parameter and will default to the Burnable mode if not provided. However, this mode cannot be changed once the contract has been installed. The mode is set by passing a u8 value to the burn_mode runtime argument.

OwnerReverseLookupMode

The OwnerReverseLookupMode modality is set at install and determines if a given contract instance writes necessary data to allow reverse lookup by owner in addition to by ID.

This modality provides the following options:

  1. NoLookup: The reporting and receipt functionality is not supported. In this option, the contract instance does not maintain a reverse lookup database of ownership and therefore has more predictable gas costs and greater scaling.
  2. Complete: The reporting and receipt functionality is supported. Token ownership will be tracked by the contract instance using the system described here.
  3. TransfersOnly: The reporting and receipt functionality is supported alike Complete however it is not directly active after minting but only after a first transfer. This modality is for usecases where the majority of NFTs are owned by a private minter and only NFT's that have been transferred benefit from reverse lookup tracking. Token ownership will be as well tracked by the contract instance using the system described here.

Additionally, when set to Complete, causes a receipt to be returned by the mint or transfer entrypoints, which the caller can store in their account or contract context for later reference.

Further, two special entrypoints are enabled in Complete mode. First, register_owner which when called will allocate the necessary tracking record for the imputed entity. This allows isolation of the one time gas cost to do this per owner, which is convenient for accounting purposes. Second, updated_receipts, which allows an owner of one or more NFTs held by the contract instance to attain up to date receipt information for the NFTs they currently own.

OwnerReverseLookupMode u8
NoLookup 0
Complete 1
TransfersOnly 2

This modality is an optional installation parameter and will default to the NoLookup mode if not provided. The mode is set by passing a u8 value to the owner_reverse_lookup_mode runtime argument. This mode cannot be changed once the contract has been installed.

Note : if ownership_mode is set to Minter and the minting_mode is set to Installer only, OwnerReverseLookupMode will be set to NoLookup. This is because the minter, by definition, owns all of the tokens forever. Therefore, there is no reason to do a reverse lookup for that owner. This rule applies only to newly installed contract instances.

Note : if OwnerReverseLookupMode is set to TransfersOnly then ownership_mode has to be set to Transferable only. This is because other ownership modes do not allow transfer.

If you are upgrading a contract from CEP-78 version 1.0 to 1.1, OwnerReverseLookupMode will be set to Complete, as this was the standard behavior of CEP-78 1.0. In addition to being set to Complete, existing records will be migrated into the CEP-78 1.1 format, which will impose a one-time gas cost to cover the migration.

If you have an existing CEP-78 version 1.0 contract instance, and would prefer the newer functionality with no lookup, the only option is to install a separate, new contract instance and mint all of the NFTs anew in that instance and then burn the corresponding NFTs from the old instance. If you do not own all the NFTs held by the old contract instance, you do not have this option.

NamedKeyConventionMode

The NamedKeyConvention modality dictates whether the Wasm passed will attempt to install a version 1.1.1 instance of CEP-78 or attempt to migrate a version 1.0 CEP-78 instance to version 1.1.1.

This modality provides three options:

  1. DerivedFromCollectionName: This modality will signal the contract to attempt to install a new version 1.1.1 instance of the CEP-78 contract. The contract package hash and the access URef will be saved in the installing account's NamedKeys as cep78_contract_package_<collection_name> and cep78_contract_package_access_<collection_name>.
  2. V_1_0_standard: This modality will signal the contract to attempt to upgrade from version 1.0 to version 1.1.1. In this scenario, the contract will retrieve the package hash and the access URef from the NamedKey entries originally created during the 1.0 installation.
  3. V_1_0_custom: This modality will signal the contract to attempt to upgrade from version 1.0 to version 1.1.1. In this scenario, the calling account must provide the NamedKey entries under which the package hash and the access URef are saved. Additionally, this requires the passing of the runtime arguments access_key_name and hash_key_name for the access URef and package hash, respectively. In this modality, these arguments are required and must be passed in.
NamedKeyConvention u8
DerivedFromCollectionName 0
V_1_0_standard 1
V_1_0_custom 2

Modality Conflicts

The MetadataMutability option of Mutable cannot be used in conjunction with NFTIdentifierMode modality of Hash.

Usage

Installing the contract.

The main.rs file within the contract provides the installer for the NFT contract. Users can compile the contract to Wasm using the make build-contract with the provided Makefile.

The pre-built Wasm for the contract and all other utility session code can be found as part of the most current release. Users wishing to build the Wasm themselves can pull the code and the make build-contract provided in the included Makefile. Please note, however, that as part of building the contract, you will need to install wasm-strip.

The call method will install the contract with the necessary entrypoints and call the init() entrypoint to allow the contract to self initialize and setup the necessary state to allow for operation, The following are the required runtime arguments that must be passed to the installer session code to correctly install the NFT contract.

  • "collection_name": The name of the NFT collection, passed in as a String. This parameter is required and cannot be changed post installation.
  • "collection_symbol": The symbol representing a given NFT collection, passed in as a String. This parameter is required and cannot be changed post installation.
  • "total_token_supply": The total number of NFTs that a specific instance of a contract will mint passed in as a U64 value. This parameter is required and cannot be changed post installation.
  • "ownership_mode": The OwnershipMode modality that dictates the ownership behavior of the NFT contract. This argument is passed in as a u8 value and is required at the time of installation.
  • "nft_kind": The NFTKind modality that specifies the off-chain items represented by the on-chain NFT data. This argument is passed in as a u8 value and is required at the time of installation.
  • "json_schema": The JSON schema for the NFT tokens that will be minted by the NFT contract passed in as a String. This parameter is required if the metadata kind is set to CustomValidated(4) and cannot be changed post installation.
  • "nft_metadata_kind": The metadata schema for the NFTs to be minted by the NFT contract. This argument is passed in as a u8 value and is required at the time of installation.
  • "identifier_mode": The NFTIdentifierMode modality dictates the primary identifier for NFTs minted by the contract. This argument is passed in as a u8 value and is required at the time of installation.
  • "metadata_mutability": The MetadataMutability modality dictates whether the metadata of minted NFTs can be updated. This argument is passed in as a u8 value and is required at the time of installation.

The following are the optional parameters that can be passed in at the time of installation.

  • "minting_mode": The MintingMode modality that dictates the access to the mint() entry-point in the NFT contract. This is an optional parameter that will default to restricting access to the installer of the contract. This parameter cannot be changed once the contract has been installed.
  • "allow_minting": The "allow_minting" flag allows the installer of the contract to pause the minting of new NFTs. The allow_minting is a boolean toggle that allows minting when true. If not provided at install the toggle will default to true. This value can be changed by the installer by calling the set_variables() entrypoint.
  • "whitelist_mode": The WhitelistMode modality dictates whether the contract whitelist can be updated. This optional parameter will default to an unlocked whitelist that can be updated post installation. This parameter cannot be changed once the contract has been installed.
  • "holder_mode": The NFTHolderMode modality dictates which entities can hold NFTs. This is an optional parameter and will default to a mixed mode allowing either Accounts or Contracts to hold NFTs. This parameter cannot be changed once the contract has been installed.
  • "contract_whitelist": The contract whitelist is a list of contract hashes that specifies which contracts can call the mint() entrypoint to mint NFTs. This is an optional parameter which will default to an empty whitelist. This value can be changed via the set_variables post installation. If the whitelist mode is set to locked, a non-empty whitelist must be passed; else, installation of the contract will fail.
  • "burn_mode": The BurnMode modality dictates whether minted NFTs can be burnt. This is an optional parameter and will allow tokens to be burnt by default. This parameter cannot be changed once the contract has been installed.
  • "owner_reverse_lookup_mode": The OwnerReverseLookupMode modality dictates whether the lookup for owners to token identifiers is available. This is an optional parameter and will not provide the lookup by default. This parameter cannot be changed once the contract has been installed.
Example deploy

The following is an example of deploying the installation of the NFT contract via the Rust Casper command client.

casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 500000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-1/keys/secret_key.pem --session-path ~/casper/enhanced-nft/contract/target/wasm32-unknown-unknown/release/contract.wasm \
--session-arg "collection_name:string='enhanced-nft-1'" \
--session-arg "collection_symbol:string='ENFT-1'" \
--session-arg "total_token_supply:u256='10'" \
--session-arg "ownership_mode:u8='0'" \
--session-arg "nft_kind:u8='1'" \
--session-arg "json_schema:string='nft-schema'" \
--session-arg "allow_minting:bool='true'" 

Utility session code

Specific entrypoints in use by the current implementation of the NFT contract require session code to accept return values passed by the contract over the Wasm boundary. In order to help with the installation and use of the NFT contract, session code for such entrypoints has been provided. It is recommended that users and DApp developers attempting to engage with the NFT contract do so with the help of the provided utility session code. The session code can be found in the client folder within the project folder.

Entrypoint name Session code
"mint" client/mint_session
"balance_of" client/balance_of_session
"get_approved client/get_approved_session
"owner_of" client/owner_of_session
"transfer" client/transfer_session

Installing and Interacting with the Contract using the Rust Casper Client

This contract code installs an instance of the CEP-78 enhanced NFT standard as per session arguments provided at the time of installation.

This contract requires a minimum Rust version of 1.63.0.

Installing the Contract

Installing the enhanced NFT contract to global state requires the use of a Deploy. In this case, the session code can be compiled to Wasm by running the make build-contract command provided in the Makefile at the top level. The Wasm will be found in the contract/target/wasm32-unknown-unknown/release directory as contract.wasm.

Below is an example of a casper-client command that provides all required session arguments to install a valid instance of the CEP-78 contract on global state.

  • casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 500000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-1/keys/secret_key.pem --session-path ~/casper/enhanced-nft/contract/target/wasm32-unknown-unknown/release/contract.wasm
  1. --session-arg "collection_name:string='CEP-78-collection'"

    The name of the NFT collection as a string. In this instance, "CEP-78-collection".

  2. --session-arg "collection_symbol:string='CEP78'"

    The symbol representing the NFT collection as a string. In this instance, "CEP78".

  3. --session-arg "total_token_supply:u64='100'"

    The total supply of tokens to be minted. In this instance, 100. If the contract owner is unsure of the total number of NFTs they will require, they should err on the side of caution. This value cannot be changed at a later date.

  4. --session-arg "ownership_mode:u8='2'"

    The ownership mode for this contract. In this instance the 2 represents "Transferable" mode. Under these conditions, users can freely transfer their NFTs between one another.

  5. --session-arg "nft_kind:u8='1'"

    The type of commodity represented by these NFTs. In this instance, the 1 represents a digital collection.

  6. --session-arg "nft_metadata_kind:u8='0'"

    The type of metadata used by this contract. In this instance, the 0 represents CEP-78 standard for metadata.

  7. --session-arg "json_schema:string=''"

    An empty JSON string, as the contract has awareness of the CEP-78 JSON schema. Using the custom validated modality would require passing through a valid JSON schema for your custom metadata.

  8. --session-arg "identifier_mode:u8='0'"

    The mode used to identify individual NFTs. For 0, this means an ordinal identification sequence rather than by hash.

  9. --session-arg "metadata_mutability:u8='0'"

    A setting allowing for mutability of metadata. This is only available when using the ordinal identification mode, as the hash mode depends on immutability for identification. In this instance, despite ordinal identification, the 0 represents immutable metadata.

The session arguments match the available modalities as listed in this README.

Casper client command without comments
casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 500000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-1/keys/secret_key.pem --session-path ~/casper/enhanced-nft/contract/target/wasm32-unknown-unknown/release/contract.wasm \
--session-arg "collection_name:string='CEP-78-collection'" \
--session-arg "collection_symbol:string='CEP78'" \
--session-arg "total_token_supply:u64='100'" \
--session-arg "ownership_mode:u8='2'" \
--session-arg "nft_kind:u8='1'" \
--session-arg "nft_metadata_kind:u8='0'" \
--session-arg "json_schema:string=''" \
--session-arg "identifier_mode:u8='0'" \
--session-arg "metadata_mutability:u8='0'" 

Directly Invoking Entrypoints

With the release of CEP-78 version 1.1, users that are interacting with a CEP-78 contract that does not use ReverseLookupMode should opt out of using the client Wasms provided as part of the release. Opting out in this situation is recommended, as directly invoking the entrypoints incurs a lower gas cost compared against using the provided client Wasm to invoke the entrypoint.

You may invoke the mint, transfer or burn entrypoints directly through either the contract package hash or the contract hash directly.

Specifically in the case of mint, there are fewer runtime arguments that must be provided, thereby reducing the total gas cost of minting an NFT.

Example Mint using StoredVersionByHash
casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" \ --payment-amount 7500000000 \ -k ~/secret_key.pem \
--session-package-hash hash-b3b7a74ae9ef2ea8afc06d6a0830961259605e417e95a53c0cb1ca9737bb0ec7 \
--session-entry-point "mint" \
--session-arg "token_owner:key='account-hash-e9ff87766a1d2bab2565bfd5799054946200b51b20c3ca7e54a9269e00fe7cfb'" \
--session-arg "token_meta_data:string='{\"name\": \"John Doe\",\"token_uri\": \"https:\/\/www.barfoo.com\",\"checksum\": \"940bffb3f2bba35f84313aa26da09ece3ad47045c6a1292c2bbd2df4ab1a55fb\"}'"
Example Transfer using StoredContractByHash

Based on the identifier mode for the given contract instance, either the token_id runtime argument must be passed in or in the case of the hash identifier mode, the token_hash runtime argument.

casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" \ --payment-amount 7500000000 \ -k ~/secret_key.pem \
--session-hash hash-b3b7a74ae9ef2ea8afc06d6a0830961259605e417e95a53c0cb1ca9737bb0ec7 \
--session-entry-point "transfer" \
--session-arg "source_key:key='account-hash-e9ff87766a1d2bab2565bfd5799054946200b51b20c3ca7e54a9269e00fe7cfb'" \
--session-arg "target_key:key='account-hash-b4782e7c47e4deca5bd90b7adb2d6e884f2d331825d5419d6cbfb59e17642aab'" \
--session-arg "token_id:u64='0'" 

Minting an NFT

Below is an example of a casper-client command that uses the mint function of the contract to mint an NFT for the user associated with node-1 in an NCTL environment.

  • casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 5000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-1/keys/secret_key.pem --session-path ~/casper/enhanced-nft/client/mint_session/target/wasm32-unknown-unknown/release/mint_call.wasm
  1. --session-arg "nft_contract_hash:key='hash-206339c3deb8e6146974125bb271eb510795be6f250c21b1bd4b698956669f95'"

    The contract hash of the previously installed CEP-78 NFT contract from which we will be minting.

  2. --session-arg "collection_name:string='cep78_<collection_name>'"

    The collection name of the previously installed CEP-78 NFT contract from which we will be minting.

  3. --session-arg "token_owner:key='account-hash-e9ff87766a1d2bab2565bfd5799054946200b51b20c3ca7e54a9269e00fe7cfb'"

    The collection name of the NFT to be minted.

  4. --session-arg "token_meta_data:string='{\"name\": \"John Doe\",\"token_uri\": \"https:\/\/www.barfoo.com\",\"checksum\": \"940bffb3f2bba35f84313aa26da09ece3ad47045c6a1292c2bbd2df4ab1a55fb\"}'"

    Metadata describing the NFT to be minted, passed in as a string.

Casper client command without comments
casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 5000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-1/keys/secret_key.pem --session-path ~/casper/enhanced-nft/client/mint_session/target/wasm32-unknown-unknown/release/mint_call.wasm \
--session-arg "nft_contract_hash:key='hash-206339c3deb8e6146974125bb271eb510795be6f250c21b1bd4b698956669f95'" \
`--session-arg "collection_name:string='cep78_<collection_name>'"` \
--session-arg "token_owner:key='account-hash-e9ff87766a1d2bab2565bfd5799054946200b51b20c3ca7e54a9269e00fe7cfb'"  \
--session-arg "token_meta_data:string='{\"name\": \"John Doe\",\"token_uri\": \"https:\/\/www.barfoo.com\",\"checksum\": \"940bffb3f2bba35f84313aa26da09ece3ad47045c6a1292c2bbd2df4ab1a55fb\"}'"

Transferring NFTs Between Users

Below is an example of a casper-client command that uses the transfer function to transfer ownership of an NFT from one user to another. In this case, we are transferring the previously minted NFT from the user associated with node-2 to the user associated with node-3.

  • casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 5000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-2/keys/secret_key.pem --session-path ~/casper/enhanced-nft/client/transfer_session/target/wasm32-unknown-unknown/release/transfer_call.wasm
  1. --session-arg "nft_contract_hash:key='hash-52e78ae3f6c485d036a74f65ebbb8c75fcc7c33fb42eb667fb32aeba72c63fb5'"

    The contract hash of the CEP-78 NFT Contract associated with the NFT to be transferred.

  2. --session-arg "source_key:key='account-hash-e9ff87766a1d2bab2565bfd5799054946200b51b20c3ca7e54a9269e00fe7cfb'"

    The account hash of the user that currently owns the NFT and wishes to transfer it.

  3. --session-arg "target_key:key='account-hash-b4772e7c47e4deca5bd90b7adb2d6e884f2d331825d5419d6cbfb59e17642aab'"

    The account hash of the user that will receive the NFT.

  4. --session-arg "is_hash_identifier_mode:bool='false'"

    Argument that the hash identifier mode is ordinal, thereby requiring a token_id rather than a token_hash.

  5. --session-arg "token_id:u64='0'"

    The token_id of the NFT to be transferred.

Casper client command without comments
casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 5000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-2/keys/secret_key.pem --session-path ~/casper/enhanced-nft/client/transfer_session/target/wasm32-unknown-unknown/release/transfer_call.wasm \
--session-arg "nft_contract_hash:key='hash-52e78ae3f6c485d036a74f65ebbb8c75fcc7c33fb42eb667fb32aeba72c63fb5'" \
--session-arg "source_key:key='account-hash-e9ff87766a1d2bab2565bfd5799054946200b51b20c3ca7e54a9269e00fe7cfb'" \
--session-arg "target_key:key='account-hash-b4772e7c47e4deca5bd90b7adb2d6e884f2d331825d5419d6cbfb59e17642aab'" \
--session-arg "is_hash_identifier_mode:bool='false'" \
--session-arg "token_id:u64='0'"  

Burning an NFT

Below is an example of a casper-client command that uses the burn function to burn an NFT within a CEP-78 collection. If this command is used, the NFT in question will no longer be accessible by anyone.

  • casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 5000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-1/keys/secret_key.pem
  1. --session-hash hash-52e78ae3f6c485d036a74f65ebbb8c75fcc7c33fb42eb667fb32aeba72c63fb5

    The session hash corresponding to the NFT's contract hash.

  2. --session-entry-point "burn"

    The entrypoint corresponding to the burn function.

  3. --session-arg "token_id:u64='1'"

    The token ID for the NFT to be burned. If the identifier_mode is not set to Ordinal, you must provide the token_hash instead.

Casper client command without comments
casper-client put-deploy -n http://localhost:11101/rpc --chain-name "casper-net-1" --payment-amount 5000000000 -k ~/casper/casper-node/utils/nctl/assets/net-1/nodes/node-1/keys/secret_key.pem \
--session-hash hash-52e78ae3f6c485d036a74f65ebbb8c75fcc7c33fb42eb667fb32aeba72c63fb5 \
--session-entry-point "burn" \
--session-arg "token_id:u64='1'"

Test Suite and Specification

The expected behavior of the NFT contract implementation is asserted by its test suite found in the tests folder. The test suite and the corresponding unit tests comprise the specification around the contract and outline the expected behaviors of the NFT contract across the entire range of possible configurations (i.e modalities and toggles like allow minting). The test suite ensures that as new modalities are added, and current modalities are extended, no regressions and conflicting behaviors are introduced. The test suite also asserts the correct working behavior of the utility session code provided in the client folder. The tests can be run by using the provided Makefile and running the make test command.

Owner Reverse Lookup Functionality

In version 1.0 of the CEP-78 Enhanced NFT Standard contract, tracking minted tokens consisted of a single, unbounded list that would grow in size with each additional token. As a result, gas costs would increase over time as the list must be overwritten with each new minting.

In an effort to stabilize the gas costs of larger NFT collections, version 1.1 of CEP-78 includes the use of a pre-allocated page system to track ownership of NFTs within the contract.

This system stabilizes the cost for interacting with the contract, but not the mint price itself. The size of metadata for a collection, and any differences in that metadata, will still result in some fluctuation in the price for the NFT itself. However, the cost of engaging the system itself will remain stable. Users can expect to pay a higher upfront price for page allocation, but will not need to pay this cost again for any NFTs minted within that given page.

The CEP-78 Page System

Ownership of NFTs within a CEP-78 contract is now tracked with a series of pages, with each page tracking a range of 1,000 tokens each. When installing an instance of the CEP-78 contract, the user determines the total token supply. This, in turn, determines the maximum number of pages, i.e., for a 10,000 token collection, each account could have up to 10 pages numbering from 0-9 tracking ownership of NFTs.

A page_table tracks which pages within a range have been allocated and set for a certain user. The size of the page table directly correlates to the total token supply, i.e. for a CEP-78 instance tracking 10,000 tokens, the page table would be 10 bits wide. For a total of 20,000 it would be 20 bits wide. The cost of the initial page table allocation depends on the overall total size of a collection, with larger collections possessing correspondingly greater gas costs. To make initial minting costs more stable across contracts, the process of allocating a page table has been shifted to the register_owner entrypoint.

After registering as an owner, the contract creates an entry within the page_table dictionary for the minting account or contract. This dictionary entry consists of a series of boolean values amounting to the total number of pages in the collection. In our 10,000 token example, this would be 10 bits set to false.

Upon minting the token, the user will pay for a page allocation. This adds them to the page dictionary, in which each entry corresponds to a specific account or contract that owns tokens within that page. That account or contract's entry in the page dictionary will consist of 1,000 page_address bits set to False upon allocation, and the minting of any given token in that page will set the page_address bit to True.

In addition, that account or contract's page_table will be updated by marking the corresponding page number's bit as True.

As an example, consider a new user minting their first NFT with a given CEP-78 contract set to a maximum number of 10,000 tokens. They are minting the 2,350th token within that collection. The following sequence of events would occur:

  1. The contract registers their account as an owner.

  2. The contract creates a page_table dictionary for that account, with 10 boolean values. As the numbering system begins with 0, the third boolean value corresponding with page 2 is set to True.

  3. The account pays for allocation of page 2, creating an entry in the Page 2 dictionary for that account. Within that entry, there are 1,000 boolean values set to false. Minting the 2,350th token in the collection sets the corresponding page_address boolean for 350 as True.

  4. Any further tokens minted by this account prior to the 3,000th token being minted will not have to pay for additional page allocations. If the account mints a token at or beyond 3,000, they must pay for the corresponding page allocation. For example, if they decided to mint the 5,125th token in the collection, they would need to pay for page 5 to be allocated to them. They would then be added to the page 5 dictionary with the page_address boolean for 125 set as True.

This system binds the data writing costs to a maximum size of any given page dictionary.

Updated Receipts

If the contract enables OwnerReverseLookupMode, calling the updated_receipts entrypoint will return a list of receipt names alongside the dictionary for the relevant pages.

Updated receipts come in the format of "{}_m{modulo}_p{}". Once again using the 2,350th token as an example, the receipt would read:

cep78_collection_m_350_p_2

You can determine the token number by multiplying the page_number by the page_size(1,000) and adding the modulo.

If the NFTIdentifierMode is set to Ordinal, this number corresponds directly to the token ID.

If it is set to Hash, you will need to reference the HASH_BY_INDEX dictionary to determine the mapping of token numbers to token hashes.

Error Codes

Code Error
1 InvalidAccount
2 MissingInstaller
3 InvalidInstaller
4 UnexpectedKeyVariant
5 MissingTokenOwner
6 InvalidTokenOwner
7 FailedToGetArgBytes
8 FailedToCreateDictionary
9 MissingStorageUref
10 InvalidStorageUref
11 MissingOwnerUref
12 InvalidOwnersUref
13 FailedToAccessStorageDictionary
14 FailedToAccessOwnershipDictionary
15 DuplicateMinted
16 FailedToConvertCLValue
17 MissingCollectionName
18 InvalidCollectionName
19 FailedToSerializeMetaData
20 MissingAccount
21 MissingMintingStatus
22 InvalidMintingStatus
23 MissingCollectionSymbol
24 InvalidCollectionSymbol
25 MissingTotalTokenSupply
26 InvalidTotalTokenSupply
27 MissingTokenID
28 InvalidTokenIdentifier
29 MissingTokenOwners
30 MissingAccountHash
31 InvalidAccountHash
32 TokenSupplyDepleted
33 MissingOwnedTokensDictionary
34 TokenAlreadyBelongsToMinterFatal
35 FatalTokenIdDuplication
36 InvalidMinter
37 MissingMintingMode
38 InvalidMintingMode
39 MissingInstallerKey
40 FailedToConvertToAccountHash
41 InvalidBurner
42 PreviouslyBurntToken
43 MissingAllowMinting
44 InvalidAllowMinting
45 MissingNumberOfMintedTokens
46 InvalidNumberOfMintedTokens
47 MissingTokenMetaData
48 InvalidTokenMetaData
49 MissingApprovedAccountHash
50 InvalidApprovedAccountHash
51 MissingApprovedTokensDictionary
52 TokenAlreadyApproved
53 MissingApproveAll
54 InvalidApproveAll
55 MissingOperator
56 InvalidOperator
57 Phantom
58 ContractAlreadyInitialized
59 MintingIsPaused
60 FailureToParseAccountHash
61 VacantValueInDictionary
62 MissingOwnershipMode
63 InvalidOwnershipMode
64 InvalidTokenMinter
65 MissingOwnedTokens
66 InvalidAccountKeyInDictionary
67 MissingJsonSchema
68 InvalidJsonSchema
69 InvalidKey
70 InvalidOwnedTokens
71 MissingTokenURI
72 InvalidTokenURI
73 MissingNftKind
74 InvalidNftKind
75 MissingHolderMode
76 InvalidHolderMode
77 MissingWhitelistMode
78 InvalidWhitelistMode
79 MissingContractWhiteList
80 InvalidContractWhitelist
81 UnlistedContractHash
82 InvalidContract
83 EmptyContractWhitelist
84 MissingReceiptName
85 InvalidReceiptName
86 InvalidJsonMetadata
87 InvalidJsonFormat
88 FailedToParseCep78Metadata
89 FailedToParse721Metadata
90 FailedToParseCustomMetadata
91 InvalidCEP78Metadata
92 FailedToJsonifyCEP78Metadata
93 InvalidNFT721Metadata
94 FailedToJsonifyNFT721Metadata
95 InvalidCustomMetadata
96 MissingNFTMetadataKind
97 InvalidNFTMetadataKind
98 MissingIdentifierMode
99 InvalidIdentifierMode
100 FailedToParseTokenId
101 MissingMetadataMutability
102 InvalidMetadataMutability
103 FailedToJsonifyCustomMetadata
104 ForbiddenMetadataUpdate
105 MissingBurnMode
106 InvalidBurnMode
107 MissingHashByIndex
108 InvalidHashByIndex
109 MissingIndexByHash
110 InvalidIndexByHash
111 MissingPageTableURef
112 InvalidPageTableURef
113 MissingPageLimit
114 InvalidPageLimit
115 InvalidPageNumber
116 InvalidPageIndex
117 MissingUnmatchedHashCount
118 InvalidUnmatchedHashCount
119 MissingPackageHashForUpgrade
120 MissingPageUref
121 InvalidPageUref
122 CannotUpgradeWithZeroSupply
123 CannotInstallWithZeroSupply
124 MissingMigrationFlag
125 InvalidMigrationFlag
126 ContractAlreadyMigrated
127 UnregisteredOwnerInMint
128 UnregisteredOwnerInTransfer
129 MissingReportingMode
130 InvalidReportingMode
131 MissingPage
132 UnregisteredOwnerFromMigration
133 ExceededMaxTotalSupply
134 MissingCep78PackageHash
135 InvalidCep78InvalidHash
136 InvalidPackageHashName
137 InvalidAccessKeyName
138 InvalidCheckForUpgrade
139 InvalidNamedKeyConvention

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Rust 88.0%
  • TypeScript 10.6%
  • Other 1.4%