Skip to content

Performance portable routines for opacity, emissivity, and scattering

License

Notifications You must be signed in to change notification settings

lanl/singularity-opac

Repository files navigation

singularity-opac

Tests

Performance Portable Opacity and Emissivity library for simulation codes

API

singularity-opac provides a uniform API for all opacity models. The following functions are provided (here, \sigma is the frequency- and angle-dependent cross section in units of cm^2):

Function Expression Description Units
AbsorptionCoefficient n \sigma Absorption coefficient cm^{-1}
AngleAveragedAbsorptionCoefficient \frac{1}{4 \pi}\int n \sigma d\Omega Absorption coefficient averaged over solid angle cm^{-1}
EmissivityPerNuOmega j_{\nu} = \frac{dE}{d^3x dt d\Omega d\nu} Frequency- and angle-dependent emissivity erg cm^{-3} s^{-1} Sr^{-1} Hz^{-1}
EmissivityPerNu \int j_{\nu} d\Omega Frequency-dependent emissivity erg cm^{-3} s^{-1} Hz^{-1}
Emissivity \int j_{\nu} d\nu d\Omega Total emissivity erg cm^{-3} s^{-1}
NumberEmissivity \int \frac{1}{h \nu} j_{\nu} d\Omega d\nu Total number emissivity cm^{-3} s^{-1}
ThermalDistributionOfTNu B_{\nu} = \frac{dE}{dA dt d\Omega d\nu} Specific intensity of thermal distribution erg cm^{-2} s^{-1} Sr^{-1} Hz^{-1}
DThermalDistributionOfTNuDT dB_{\nu}/dT Temperature derivative of specific intensity of thermal distribution erg cm^{-2} s^{-1} Sr^{-1} Hz^{-1} K^{-1}
ThermalDistributionOfT B = \int B_{\nu} d\Omega d\nu Frequency- and angle-integrated intensity of thermal distribution erg cm^{-2} s^{-1}
ThermalNumberDistributionOfT B = \int \frac{1}{h \nu} B_{\nu} d\Omega d\nu Frequency- and angle-integrated intensity of thermal distribution erg cm^{-2} s^{-1}

Note that the thermal radiation energy density u = 1/c ThermalDistributionOfT and the thermal radiation number density n = 1/c ThermalNumberDistributionOfT.

Internally singularity-opac always uses CGS units, as in the above table. However, arbitrary units are supported through the units modifier.

To Build

At its most basic:

git clone --recursive [email protected]:lanl/singularity-opac.git
cd singularity-opac
mkdir bin
cd bin
cmake ..
make

To Make tests

Then, in the singularity-opac root directory:

mkdir -p bin
cd bin
cmake -DSINGULARITY_BUILD_TESTS=ON ..
make -j
make test

Build Options

A number of options are avaialable for compiling:

Option Default Comment
SINGULARITY_BUILD_TESTS OFF Build test infrastructure.
SINGULARITY_USE_HDF5 ON Enables HDF5. Required for Spiner opacities.
SINGULARITY_KOKKOS_IN_TREE OFF Force cmake to use Kokkos source included in tree.

Copyright

© 2021. Triad National Security, LLC. All rights reserved. This program was produced under U.S. Government contract 89233218CNA000001 for Los Alamos National Laboratory (LANL), which is operated by Triad National Security, LLC for the U.S. Department of Energy/National Nuclear Security Administration. All rights in the program are reserved by Triad National Security, LLC, and the U.S. Department of Energy/National Nuclear Security Administration. The Government is granted for itself and others acting on its behalf a nonexclusive, paid-up, irrevocable worldwide license in this material to reproduce, prepare derivative works, distribute copies to the public, perform publicly and display publicly, and to permit others to do so.

About

Performance portable routines for opacity, emissivity, and scattering

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published