Merge branch 'import-2.1.x' into pr/1078

MarlinFirmware · Jul 29, 2024 · 312afd3 · 312afd3
2 parents c1c307b + 840cb6d
commit 312afd3
Show file tree

Hide file tree

Showing 747 changed files with 14,655 additions and 13,162 deletions.
diff --git a/.github/workflows/build-pr.yml b/.github/workflows/build-pr.yml
@@ -69,13 +69,6 @@ jobs:
         pio upgrade --dev
         pio pkg update --global
 
-    - name: Install Simulator dependencies
-      run: |
-        sudo apt-get install build-essential
-        sudo apt-get install libsdl2-dev
-        sudo apt-get install libsdl2-net-dev
-        sudo apt-get install libglm-dev
-
     # Fetch the code from the other repo and compile it:
     - name: Clone Marlin
       run: |
@@ -108,6 +101,12 @@ jobs:
           if [ "$MB" == "SIMULATED" ]
           then
             ENVS=$"simulator_linux_release"
+
+            # Install Simulator dependencies
+            sudo apt-get install build-essential
+            sudo apt-get install libsdl2-dev
+            sudo apt-get install libsdl2-net-dev
+            sudo apt-get install libglm-dev
           else
             ENVS=( $( grep -EA1 "MB\(.*\b$MB\b.*\)" Marlin/src/pins/pins.h | grep -E "#include.+//.+env:[^ ]+" | grep -oE "env:[^ ]+" | sed -E "s/env://" ) )
           fi

diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -52,7 +52,7 @@
  *
  * Calibration Guides:  https://reprap.org/wiki/Calibration
  *                      https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
- *                      https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
+ *                      https://web.archive.org/web/20220907014303/sites.google.com/site/repraplogphase/calibration-of-your-reprap
  *                      https://youtu.be/wAL9d7FgInk
  *                      https://teachingtechyt.github.io/calibration.html
  *
@@ -63,7 +63,7 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(MarlinFirmware)" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 // @section machine
@@ -1731,6 +1731,8 @@
   #define PROBING_BED_TEMP     50
 #endif
 
+// @section stepper drivers
+
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
@@ -1904,6 +1906,8 @@
 #endif
 
 /**
+ * @section filament runout sensors
+ *
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
  *
@@ -2432,9 +2436,9 @@
 #define PREHEAT_2_TEMP_CHAMBER 35
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
-// @section motion
-
 /**
+ * @section nozzle park
+ *
  * Nozzle Park
  *
  * Park the nozzle at the given XYZ position on idle or G27.
@@ -2457,6 +2461,8 @@
 #endif
 
 /**
+ * @section nozzle clean
+ *
  * Clean Nozzle Feature
  *
  * Adds the G12 command to perform a nozzle cleaning process.
@@ -2617,9 +2623,24 @@
   //#include "Configuration_Secure.h"       // External file with PASSWORD_DEFAULT_VALUE
 #endif
 
-//=============================================================================
-//============================= LCD and SD support ============================
-//=============================================================================
+// @section media
+
+/**
+ * SD CARD
+ *
+ * SD Card support is disabled by default. If your controller has an SD slot,
+ * you must uncomment the following option or it won't work.
+ */
+//#define SDSUPPORT
+
+/**
+ * SD CARD: ENABLE CRC
+ *
+ * Use CRC checks and retries on the SD communication.
+ */
+#if ENABLED(SDSUPPORT)
+  //#define SD_CHECK_AND_RETRY
+#endif
 
 // @section interface
 
@@ -2666,21 +2687,6 @@
  */
 #define LCD_INFO_SCREEN_STYLE 0
 
-/**
- * SD CARD
- *
- * SD Card support is disabled by default. If your controller has an SD slot,
- * you must uncomment the following option or it won't work.
- */
-//#define SDSUPPORT
-
-/**
- * SD CARD: ENABLE CRC
- *
- * Use CRC checks and retries on the SD communication.
- */
-//#define SD_CHECK_AND_RETRY
-
 /**
  * LCD Menu Items
  *
@@ -2809,7 +2815,7 @@
 
 //
 // Original RADDS LCD Display+Encoder+SDCardReader
-// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/
+// https://web.archive.org/web/20200719145306/doku.radds.org/dokumentation/lcd-display/
 //
 //#define RADDS_DISPLAY
 
@@ -2875,7 +2881,7 @@
 
 //
 // Elefu RA Board Control Panel
-// https://web.archive.org/web/20140823033947/http://www.elefu.com/index.php?route=product/product&product_id=53
+// https://web.archive.org/web/20140823033947/www.elefu.com/index.php?route=product/product&product_id=53
 //
 //#define RA_CONTROL_PANEL
 
@@ -3007,7 +3013,7 @@
 
 //
 // Cartesio UI
-// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+// https://web.archive.org/web/20180605050442/mauk.cc/webshop/cartesio-shop/electronics/user-interface
 //
 //#define CARTESIO_UI
 

diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -1118,15 +1118,18 @@
 /**
  * Fixed-time-based Motion Control -- EXPERIMENTAL
  * Enable/disable and set parameters with G-code M493.
+ * See ft_types.h for named values used by FTM options.
  */
 //#define FT_MOTION
 #if ENABLED(FT_MOTION)
-  #define FTM_DEFAULT_MODE        ftMotionMode_DISABLED // Default mode of fixed time control. (Enums in ft_types.h)
-  #define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (Enums in ft_types.h)
+  //#define FTM_IS_DEFAULT_MOTION                 // Use FT Motion as the factory default?
+  #define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
+  #define FTM_DEFAULT_SHAPER_X      ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
+  #define FTM_DEFAULT_SHAPER_Y      ftMotionShaper_NONE // Default shaper mode on Y axis
   #define FTM_SHAPING_DEFAULT_X_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
   #define FTM_SHAPING_DEFAULT_Y_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
   #define FTM_LINEAR_ADV_DEFAULT_ENA   false      // Default linear advance enable (true) or disable (false)
-  #define FTM_LINEAR_ADV_DEFAULT_K      0.0f      // Default linear advance gain
+  #define FTM_LINEAR_ADV_DEFAULT_K      0         // Default linear advance gain, integer value. (Acceleration-based scaling factor.)
   #define FTM_SHAPING_ZETA_X            0.1f      // Zeta used by input shapers for X axis
   #define FTM_SHAPING_ZETA_Y            0.1f      // Zeta used by input shapers for Y axis
 
@@ -1149,18 +1152,13 @@
   #define FTM_FS                     1000         // (Hz) Frequency for trajectory generation. (Reciprocal of FTM_TS)
   #define FTM_TS                        0.001f    // (s) Time step for trajectory generation. (Reciprocal of FTM_FS)
 
-  // These values may be configured to adjust the duration of loop().
-  #define FTM_STEPS_PER_LOOP           60         // Number of stepper commands to generate each loop()
-  #define FTM_POINTS_PER_LOOP         100         // Number of trajectory points to generate each loop()
-
   #if DISABLED(COREXY)
     #define FTM_STEPPER_FS          20000         // (Hz) Frequency for stepper I/O update
 
     // Use this to adjust the time required to consume the command buffer.
     // Try increasing this value if stepper motion is choppy.
     #define FTM_STEPPERCMD_BUFF_SIZE 3000         // Size of the stepper command buffers
-                                                  // (FTM_STEPS_PER_LOOP * FTM_POINTS_PER_LOOP) is a good start
-                                                  // If you run out of memory, fall back to 3000 and increase progressively
+
   #else
     // CoreXY motion needs a larger buffer size. These values are based on our testing.
     #define FTM_STEPPER_FS          30000
@@ -3460,7 +3458,7 @@
   /**
    * Step on both rising and falling edge signals (as with a square wave).
    */
-  //#define EDGE_STEPPING
+  #define EDGE_STEPPING
 
   /**
    * Enable M122 debugging command for TMC stepper drivers.
@@ -3542,7 +3540,7 @@
   //#define PHOTOGRAPH_PIN 23
 
   // Canon Hack Development Kit
-  // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/
+  // https://web.archive.org/web/20200920094805/captain-slow.dk/2014/03/09/3d-printing-timelapses/
   //#define CHDK_PIN        4
 
   // Optional second move with delay to trigger the camera shutter

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -52,7 +52,7 @@
  *
  * Calibration Guides:  https://reprap.org/wiki/Calibration
  *                      https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
- *                      https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
+ *                      https://web.archive.org/web/20220907014303/sites.google.com/site/repraplogphase/calibration-of-your-reprap
  *                      https://youtu.be/wAL9d7FgInk
  *                      https://teachingtechyt.github.io/calibration.html
  *
@@ -63,7 +63,7 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "AJMartel"  // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(AJMartel)" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 #define WEBSITE_URL "http://3DFabXYZ.com"
 
@@ -1733,6 +1733,8 @@
   #define PROBING_BED_TEMP     50
 #endif
 
+// @section stepper drivers
+
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
@@ -1906,6 +1908,8 @@
 #endif
 
 /**
+ * @section filament runout sensors
+ *
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
  *
@@ -2458,9 +2462,9 @@
 #define PREHEAT_6_TEMP_CHAMBER 35
 #define PREHEAT_6_FAN_SPEED     0  // Value from 0 to 255
 
-// @section motion
-
 /**
+ * @section nozzle park
+ *
  * Nozzle Park
  *
  * Park the nozzle at the given XYZ position on idle or G27.
@@ -2483,6 +2487,8 @@
 #endif
 
 /**
+ * @section nozzle clean
+ *
  * Clean Nozzle Feature
  *
  * Adds the G12 command to perform a nozzle cleaning process.
@@ -2643,9 +2649,24 @@
   //#include "Configuration_Secure.h"       // External file with PASSWORD_DEFAULT_VALUE
 #endif
 
-//=============================================================================
-//============================= LCD and SD support ============================
-//=============================================================================
+// @section media
+
+/**
+ * SD CARD
+ *
+ * SD Card support is disabled by default. If your controller has an SD slot,
+ * you must uncomment the following option or it won't work.
+ */
+#define SDSUPPORT
+
+/**
+ * SD CARD: ENABLE CRC
+ *
+ * Use CRC checks and retries on the SD communication.
+ */
+#if ENABLED(SDSUPPORT)
+  #define SD_CHECK_AND_RETRY
+#endif
 
 // @section interface
 
@@ -2692,21 +2713,6 @@
  */
 #define LCD_INFO_SCREEN_STYLE 0
 
-/**
- * SD CARD
- *
- * SD Card support is disabled by default. If your controller has an SD slot,
- * you must uncomment the following option or it won't work.
- */
-#define SDSUPPORT
-
-/**
- * SD CARD: ENABLE CRC
- *
- * Use CRC checks and retries on the SD communication.
- */
-#define SD_CHECK_AND_RETRY
-
 /**
  * LCD Menu Items
  *
@@ -2835,7 +2841,7 @@
 
 //
 // Original RADDS LCD Display+Encoder+SDCardReader
-// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/
+// https://web.archive.org/web/20200719145306/doku.radds.org/dokumentation/lcd-display/
 //
 //#define RADDS_DISPLAY
 
@@ -2901,7 +2907,7 @@
 
 //
 // Elefu RA Board Control Panel
-// https://web.archive.org/web/20140823033947/http://www.elefu.com/index.php?route=product/product&product_id=53
+// https://web.archive.org/web/20140823033947/www.elefu.com/index.php?route=product/product&product_id=53
 //
 //#define RA_CONTROL_PANEL
 
@@ -3033,7 +3039,7 @@
 
 //
 // Cartesio UI
-// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+// https://web.archive.org/web/20180605050442/mauk.cc/webshop/cartesio-shop/electronics/user-interface
 //
 //#define CARTESIO_UI