v0.1.1

ClimaCoupler v0.1.1

Diff since v0.1.0

Merged pull requests:

• tests on GPU - plots (#749) (@juliasloan25)
• Update climacommon to 2024_04_30 (#763) (@Sbozzolo)
• Change units to mm/day for leaderboard (#771) (@Sbozzolo)
• Refactor ClimaEarth experiment dir (#789) (@LenkaNovak)
• update deps (#794) (@juliasloan25)
• rm GPU utilities test (#796) (@juliasloan25)
• Add dry Held-Suarez run script (#798) (@LenkaNovak)
• Add RMSE leaderboard (#799) (@Sbozzolo)
• Add moist Held-Suarez run script (#801) (@LenkaNovak)
• use ClimaAtmos aquaplanet_diagedmf.yml (#802) (@juliasloan25)
• pass in job_id as command line argument (#804) (@juliasloan25)
• rm bycolumn (#805) (@juliasloan25)
• add dependabot (#806) (@juliasloan25)
• Add cloud-less aquaplanet driver (#808) (@LenkaNovak)
• Add cloudy aquaplanet driver (#811) (@LenkaNovak)
• Add cloudy slabplanet driver (#813) (@LenkaNovak)
• Hierarchy visualizations (#815) (@LenkaNovak)
• set job_id for interactive runs (#816) (@juliasloan25)
• add atmos to table (#817) (@juliasloan25)
• Add other models to leaderboard (#821) (@Sbozzolo)
• update deps (#822) (@AlexisRenchon)
• Update Github workflows (#830) (@Sbozzolo)
• Add "triangle" plot (#831) (@Sbozzolo)
• Discard spin up period in leaderboard (#835) (@Sbozzolo)
• Add Artifacts.toml to test (#836) (@Sbozzolo)
• use [email protected] (#839) (@juliasloan25)
• rename diag edmf toml file (#840) (@juliasloan25)
• make restart run soft fail (#841) (@juliasloan25)
• change buildkite output folder (#842) (@juliasloan25)
• Update amip_target_topo_diagedmf.yml (#843) (@szy21)
• Add boxes in bias_leaderboard (#845) (@Sbozzolo)
• add radiative fluxes to leaderboard (#846) (@szy21)
• fix the order of season in leaderboard (#848) (@szy21)
• separate CPU/GPU target longrun configs (#852) (@juliasloan25)
• Use divergent colormap in bias plots (#855) (@Sbozzolo)
• Fix discard spinup in leaderboad and add best/worst single models (#857) (@Sbozzolo)
• Fix typo in longrun pipeline (#859) (@szy21)
• Pass context to FiniteDifferenceSpace (#861) (@charleskawczynski)
• Use ClimaComms0.6, ClimaAtmos0.26, and update ClimaEarth experiments (#864) (@akshaysridhar)
• Bugfix: beta, drag coefficient assignment (#866) (@akshaysridhar)
• Fix for ClimaLand 0.12.4 (#868) (@Sbozzolo)
• Update dependencies (#870) (@charleskawczynski)
• remove use_reference_state from the config (#871) (@szy21)
• Add 1M scheme to CI (#872) (@trontrytel)
• Update manifest (#873) (@szy21)
• use ARS343 for diag EDMF benchmarks (#874) (@juliasloan25)
• update driver docs (#878) (@juliasloan25)
• Clean up long-run pipeline, info statements. (#879) (@akshaysridhar)
• Update climaatmos.yml in benchmark (#880) (@szy21)
• add most recent amip to pipeline (#883) (@szy21)
• Add benchmark job with IO (#884) (@Sbozzolo)
• remove ediff diagnostics (#887) (@szy21)
• Update ClimaAtmos compat to 0.27, ClimaLand to 0.13 (#889) (@akshaysridhar)
• fix amip pipeline (#890) (@szy21)
• use 1 gpu for amip pipeline (#891) (@szy21)
• remove build history in amip pipeline (#893) (@szy21)
• remove leaderboard from slack report in the longrun pipepline (#894) (@szy21)
• Update to fix compat with breaking ClimaLand release (#896) (@akshaysridhar)
• use default numerics config and parameters (#899) (@szy21)
• try fixing slack report in amip pipeline (#902) (@szy21)
• Release Coupler v0.1.1 + update compat following ClimaAtmos 0.27.2 patch release (#903) (@akshaysridhar)
• update climaatmos to 0.27.1 (#906) (@szy21)
• fix atmos_config_file in longrun config (#908) (@szy21)
• clean up longrun config (#909) (@szy21)
• do not use aerosols in the amip run (#911) (@szy21)
• fix config file name in longrun pipeline (#912) (@szy21)

Closed issues:

• NSight Systems Implementation (#235)
• Clean up CI (#302)
• Performance tips (#323)
• BCReader bugs (#327)
• extend BCReader interpolate_data tests (#384)
• O1.2.5 Atmos-land simulations on GPU at 1 SYPD on 4 A100s (#390)
• O1.5.3e (coupler) Leaderboard for AMIP (#407)
• decide on convention for using module within module (#447)
• Setup example hierarchy (#488)
• make tests GPU-compatible (#571)
• Reduce conservation error to sqrt(eps) (#594)
• check parameter consistency between components (#610)
• fix libLLVM error, add back windows GHA (#631)
• Use Frierson diffusion in amip target longrun (#645)
• MPI runs on CI fail after postprocessing (#664)
• Investigate CPU conservation degradation at radiation dt (#710)
• /groups/esm/slurm-buildkite/climacoupler-ci folder (#713)
• tests on GPU - remove Fields.bycolumn (#736)
• tests on GPU - plots (#750)
• Hierarchies: Dry Held-Suarez driver (#759)
• Hierarchies: Moist Held-Suarez driver (#760)
• Hierarchies: Cloud-less aquaplanet driver (#761)
• Hierarchies: Cloudy aquaplanet driver (#762)
• Fix land albedo regridding (#764)
• Investigate most stable sponge parameters (#773)
• remove job_id from config files (#776)
• table improvement: add atmos run without diag EDMF (#778)
• Move precipitation observation to ClimaArtifacts (#781)
• try topo + diag edmf longrun with Float64 (#784)
• Refactor ClimaEarth experiment dir (#788)
• update for latest dependencies (#792)
• remove GPU Utilities test (#795)
• Update longruns for ClimaAtmos config changes (#800)
• Stabilize EDMF longrun after updating to ClimaAtmos = "0.24" (#809)
• Hierarchies: Cloudy slabplanet (AMIP minus data) (#812)
• add hierarchy data visualizations (#814)
• Change back the GPU longrun config to 300d (#820)
• tests cannot be run unless the ClimaEarth environment is initialized (#834)
• Update to ClimaComms v0.6 (#837)
• Remove ArtifactWrappers; document artifacts (#838)
• O1.5.x Make a good multiyear simulation before 7/4 (#847)
• precipitation is not defined for 1M microphysics (#849)
• Unphysical values in TOA downward SW flux (#851)
• No output in netcdf when cpu run breaks (#858)
• check fields regridded with TempestRemap (#860)
• fix BulkScheme beta setting (#862)
• Stabilize diagnostic EDMF + 0M AMIP run (#865)
• NaN in longwave radiation flux (#869)
• O1.5.2d Run AMIP simulation with 0M microphysics (#876)
• create minimal Atmos/Land experiment (#877)
• Set up a pipeline for the best AMIP we have (#881)
• Update insolation config args (#882)
• Land model compat update (#895)
• O1.5.2e Run AMIP simulation with 1M microphysics (#901)
• Change atmos yaml and toml file in longrun after ClimaAtmos update (#905)
• Cleanup longrun (#907)
• Error in prescribing aerosols from the coupler (#910)