Multibankable? Transposer and ChangeChannel

[jeremydte]

Hello, I would like to use transposer and change channel on note buttons
Thanks.

#include <Control_Surface.h>

USBMIDI_Interface midi;

CD74HC4067 M1 = { 6, {2, 3, 4, 5} };
CD74HC4067 M2 = { 7, {2, 3, 4, 5} };
CD74HC4067 M3 = { 8, {2, 3, 4, 5} };
CD74HC4067 M4 = { 9, {2, 3, 4, 5} };
CD74HC4067 M5 = { A1, {2, 3, 4, 5} };
CD74HC4067 M6 = { A2, {2, 3, 4, 5} };

///MIDI CHANNEL//
Bank<8> bank(1);
ManyButtonsSelector<8> programSelector = {
bank,
{{M3.pin(7), M3.pin(6), M3.pin(5), M3.pin(4), M3.pin(3), M3.pin(2), M3.pin(1), M3.pin(0)}},
};

//OCTAVE SELECT//
Transposer<-2, +2> transposer {12};
IncrementDecrementSelector<transposer.getNumberOfBanks()> selector {
transposer,
{M1.pin(1), M1.pin(2)},
Wrap::Clamp,
};

Bankable::NoteButton buttons[] {

// {transposer, M1.pin(15), {48, CHANNEL_1} }, //C

{{bank, BankType::ChangeChannel}, M1.pin(15), {48, CHANNEL_1} }, //C
{{bank, BankType::ChangeChannel}, M1.pin(14), {49, CHANNEL_1} }, //C#
{{bank, BankType::ChangeChannel}, M1.pin(13), {50, CHANNEL_1} }, //D
{{bank, BankType::ChangeChannel}, M1.pin(12), {51, CHANNEL_1} }, //D#
{{bank, BankType::ChangeChannel}, M1.pin(11), {52, CHANNEL_1} }, //E
{{bank, BankType::ChangeChannel}, M1.pin(10), {53, CHANNEL_1} }, //F
{{bank, BankType::ChangeChannel}, M1.pin(9), {54, CHANNEL_1} }, //F#
{{bank, BankType::ChangeChannel}, M1.pin(8), {55, CHANNEL_1} }, //G
{{bank, BankType::ChangeChannel}, M1.pin(7), {56, CHANNEL_1} }, //G#
{{bank, BankType::ChangeChannel}, M1.pin(6), {57, CHANNEL_1} }, //A
{{bank, BankType::ChangeChannel}, M1.pin(5), {58, CHANNEL_1} }, //A#
{{bank, BankType::ChangeChannel}, M1.pin(4), {59, CHANNEL_1} }, //AB

};

Bankable::CCPotentiometer Potentiometers[] = {

{{bank, BankType::ChangeChannel}, M5.pin(0), {MIDI_CC::Modulation_Wheel , CHANNEL_1} }, //M Wheel

{{bank, BankType::ChangeChannel}, M6.pin(0), {10, CHANNEL_1} }, //Pot1
{{bank, BankType::ChangeChannel}, M6.pin(1), {10, CHANNEL_1} }, //Pot2
{{bank, BankType::ChangeChannel}, M6.pin(2), {10, CHANNEL_1} }, //Pot3
{{bank, BankType::ChangeChannel}, M6.pin(3), {10, CHANNEL_1} }, //Pot4
{{bank, BankType::ChangeChannel}, M6.pin(4), {10, CHANNEL_1} }, //Pot5
{{bank, BankType::ChangeChannel}, M6.pin(5), {10, CHANNEL_1} }, //Pot6
{{bank, BankType::ChangeChannel}, M6.pin(6), {10, CHANNEL_1} }, //Pot7
{{bank, BankType::ChangeChannel}, M6.pin(7), {10, CHANNEL_1} }, //Pot8
{{bank, BankType::ChangeChannel}, M6.pin(8), {10, CHANNEL_1} }, //Pot9

};

Bankable::PBPotentiometer Potentiometer[] = {
{{bank, BankType::ChangeChannel}, M5.pin(1), CHANNEL_1 }, //P Wheel
};

Bankable::CCButton Buttons[] = {
{{bank, BankType::ChangeChannel}, M3.pin(8), {20, CHANNEL_1} }, //PLY
};

void setup() {
Control_Surface.begin();
}

void loop() {
Control_Surface.loop();
}