Microdiff.py

from HardwareRepository.BaseHardwareObjects import Equipment
import tempfile
import logging
import math
import os
import time
from HardwareRepository import HardwareRepository
import MiniDiff
from HardwareRepository import EnhancedPopen
import copy
import gevent
import sample_centring

MICRODIFF = None

class Microdiff(MiniDiff.MiniDiff):
    def init(self):
        global MICRODIFF
        MICRODIFF = self
        self.timeout = 3
        self.phiMotor = self.getDeviceByRole('phi')
        self.exporter_addr = self.phiMotor.exporter_address
        self.x_calib = self.addChannel({ "type":"exporter", "exporter_address": self.exporter_addr, "name":"x_calib" }, "CoaxCamScaleX")
        self.y_calib = self.addChannel({ "type":"exporter", "exporter_address": self.exporter_addr, "name":"y_calib" }, "CoaxCamScaleY")       
        self.moveMultipleMotors = self.addCommand({"type":"exporter", "exporter_address":self.exporter_addr, "name":"move_multiple_motors" }, "SyncMoveMotors")
        self.head_type = self.addChannel({ "type":"exporter", "exporter_address": self.exporter_addr, "name":"head_type" }, "HeadType")
        self.kappa = self.addChannel({ "type":"exporter", "exporter_address": self.exporter_addr, "name":"kappa_enable" }, "KappaIsEnabled") 
        self.phases = {"Centring":1, "BeamLocation":2, "DataCollection":3, "Transfer":4}
        self.movePhase = self.addCommand({"type":"exporter", "exporter_address":self.exporter_addr, "name":"move_to_phase" }, "startSetPhase")
        self.readPhase =  self.addChannel({ "type":"exporter", "exporter_address": self.exporter_addr, "name":"read_phase" }, "CurrentPhase")
        self.scanLimits = self.addCommand({"type":"exporter", "exporter_address":self.exporter_addr, "name":"scan_limits" }, "getOmegaMotorDynamicScanLimits")
        if self.getProperty("use_hwstate"):
            self.hwstate_attr = self.addChannel({"type":"exporter", "exporter_address": self.exporter_addr, "name":"hwstate" }, "HardwareState")
        else:
            self.hwstate_attr = None
        self.swstate_attr = self.addChannel({"type":"exporter", "exporter_address": self.exporter_addr, "name":"swstate" }, "State")
        self.nb_frames =  self.addChannel({"type":"exporter", "exporter_address": self.exporter_addr, "name":"nbframes" }, "ScanNumberOfFrames")
        
         # raster scan attributes
        self.scan_range = self.addChannel({"type":"exporter", "exporter_address": self.exporter_addr, "name":"scan_range" }, "ScanRange")
        self.scan_exposure_time = self.addChannel({"type":"exporter", "exporter_address": self.exporter_addr, "name":"exposure_time" }, "ScanExposureTime")
        self.scan_start_angle = self.addChannel({"type":"exporter", "exporter_address": self.exporter_addr, "name":"start_angle" }, "ScanStartAngle")
        self.scan_detector_gate_pulse_enabled = self.addChannel({"type":"exporter", "exporter_address": self.exporter_addr, "name":"detector_gate_pulse_enabled" }, "DetectorGatePulseEnabled")
        self.scan_detector_gate_pulse_readout_time = self.addChannel({"type":"exporter", "exporter_address": self.exporter_addr, "name":"detector_gate_pulse_readout_time" }, "DetectorGatePulseReadoutTime")


        MiniDiff.MiniDiff.init(self)
        self.centringPhiy.direction = -1
        self.MOTOR_TO_EXPORTER_NAME = self.getMotorToExporterNames()

    def getMotorToExporterNames(self):
        #only temporary. Get the names from the xml files
        MOTOR_TO_EXPORTER_NAME = {"focus":"AlignmentX", "kappa":"Kappa",
                                  "kappa_phi":"Phi", "phi": "Omega",
                                  "phiy":"AlignmentY", "phiz":"AlignmentZ",
                                  "sampx":"CentringX", "sampy":"CentringY",
                                  "zoom":"Zoom"}
        return MOTOR_TO_EXPORTER_NAME


    def getMotorToExporterNames(self):
        #only temporary. Get the names from the xml files
        MOTOR_TO_EXPORTER_NAME = {"focus":"AlignmentX", "kappa":"Kappa",
                                  "kappa_phi":"Phi", "phi": "Omega",
                                  "phiy":"AlignmentY", "phiz":"AlignmentZ",
                                  "sampx":"CentringX", "sampy":"CentringY",
                                  "zoom":"Zoom"}
        return MOTOR_TO_EXPORTER_NAME
 
    def getCalibrationData(self, offset):
        return (1.0/self.x_calib.getValue(), 1.0/self.y_calib.getValue())

    def emitCentringSuccessful(self):
        #check first if all the motors have stopped
        self._wait_ready(10)

        # save position in MD2 software
        self.getCommandObject("save_centring_positions")()
 
        # do normal stuff
        return MiniDiff.MiniDiff.emitCentringSuccessful(self)

    def _ready(self):
        if self.hwstate_attr:
            if self.hwstate_attr.getValue() == "Ready" and self.swstate_attr.getValue() == "Ready":
                return True
        else:
            if self.swstate_attr.getValue() == "Ready":
                return True
        return False

    def _wait_ready(self, timeout=None):
        if timeout <= 0:
            timeout = self.timeout
        tt1 = time.time()
        while time.time() - tt1 < timeout:
             if self._ready():
                 break
             else:
                 time.sleep(0.5)

    def moveToPhase(self, phase, wait=False, timeout=None):
        if self._ready():
            if self.phases.has_key(phase):
                self.movePhase(phase)
                if wait:
                    if not timeout:
                        timeout = 40
                    self._wait_ready(timeout)
        else:
            print "moveToPhase - Ready is: ", self._ready()
    
    def getPhase(self):
        return self.readPhase.getValue()

    def moveSyncMotors(self, motors_dict, wait=False, timeout=None):
        argin = ""
        #print "start moving motors =============", time.time()
        for motor in motors_dict.keys():
            position = motors_dict[motor]
            if position is None:
                continue
            name=self.MOTOR_TO_EXPORTER_NAME[motor]
            argin += "%s=%0.3f;" % (name, position)
        if not argin:
            return
        move_sync_motors = self.addCommand({"type":"exporter", "exporter_address":self.exporter_addr, "name":"move_sync_motors" }, "startSimultaneousMoveMotors")
        move_sync_motors(argin)

        if wait:
            while not self._ready():
                time.sleep(0.5)
        #print "end moving motors =============", time.time()
            
    def oscilScan(self, start, end, exptime, wait=False):
        if self.in_plate_mode():
            scan_speed = math.fabs(end-start) / exptime
            low_lim, hi_lim = map(float, self.scanLimits(scan_speed))
            if start < low_lim:
                raise ValueError("Scan start below the allowed value %f" % low_lim)
            elif end > hi_lim:
                raise ValueError("Scan end abobe the allowed value %f" % hi_lim)
                
        self.nb_frames.setValue(1)
        scan_params = "1\t%0.3f\t%0.3f\t%0.4f\t1"% (start, (end-start), exptime)
        scan = self.addCommand({"type":"exporter", "exporter_address":self.exporter_addr, "name":"start_scan" }, "startScanEx")
        scan(scan_params)
        print "scan started at ----------->", time.time()
        if wait:
            self._wait_ready(300) #timeout of 5 min
            print "finished at ---------->", time.time()

    def oscilScan4d(self, start, end, exptime,  motors_pos, wait=False):
        if self.in_plate_mode():
            scan_speed = math.fabs(end-start) / exptime
            low_lim, hi_lim = map(float, self.scanLimits(scan_speed))
            if start < low_lim:
                raise ValueError("Scan start below the allowed value %f" % low_lim)
            elif end > hi_lim:
                raise ValueError("Scan end abobe the allowed value %f" % hi_lim)
        self.nb_frames.setValue(1)        
        scan_params = "%0.3f\t%0.3f\t%f\t"% (start, (end-start), exptime)
        scan_params += "%0.3f\t" % motors_pos['1']['phiy']
        scan_params += "%0.3f\t" % motors_pos['1']['phiz']
        scan_params += "%0.3f\t" % motors_pos['1']['sampx']
        scan_params += "%0.3f\t" % motors_pos['1']['sampy']
        scan_params += "%0.3f\t" % motors_pos['2']['phiy']
        scan_params += "%0.3f\t" % motors_pos['2']['phiz']
        scan_params += "%0.3f\t" % motors_pos['2']['sampx']
        scan_params += "%0.3f" % motors_pos['2']['sampy']

        scan = self.addCommand({"type":"exporter", "exporter_address":self.exporter_addr, "name":"start_scan4d" }, "startScan4DEx")
        scan(scan_params)
        print "scan started at ----------->", time.time()
        if wait:
            self._wait_ready(900) #timeout of 15 min
            print "finished at ---------->", time.time()
            
    def oscilScanMesh(self,start, end, exptime, dead_time, mesh_num_lines, mesh_total_nb_frames, mesh_center, mesh_range, wait=False):
        #import pdb; pdb.set_trace()
        self.scan_range.setValue(end-start)
        self.scan_exposure_time.setValue(exptime/mesh_num_lines)
        self.scan_start_angle.setValue(start)
        self.scan_detector_gate_pulse_enabled.setValue(True)
        servo_time = 0.110 # adding the servo time to the readout time to avoid any servo cycle jitter 
        self.scan_detector_gate_pulse_readout_time.setValue(dead_time*1000 +servo_time)  # TODO

        # Prepositionning at the center of the grid      
        self.moveMotors(mesh_center.as_dict())
        self.centringVertical.syncMoveRelative((mesh_range['vertical_range'])/2)
        self.centringPhiy.syncMoveRelative(-(mesh_range['horizontal_range'])/2)
        

        scan_params = "%0.3f\t" % mesh_range['vertical_range']
        scan_params += "%0.3f\t" % -mesh_range['horizontal_range']
        scan_params += "%d\t" % mesh_num_lines
        scan_params += "%d\t" % (mesh_total_nb_frames/mesh_num_lines)
        #scan_params += "%d\t" % 1
        scan_params += "%r" % True   # TODO

        scan = self.addCommand({"type":"exporter", "exporter_address":self.exporter_addr, "name":"start_raster_scan" }, "startRasterScan")
        scan(scan_params)
        print "scan started at ----------->", time.time()
        if wait:
            self._wait_ready(1800) #timeout of 30 min
            print "finished at ---------->", time.time()


    def in_plate_mode(self):
        try:
            return self.head_type.getValue() == "Plate"
        except:
            return False

    def in_kappa_mode(self):
        return self.head_type.getValue() == "MiniKappa" and self.kappa.getValue()

    def getPositions(self):
        pos = { "phi": float(self.phiMotor.getPosition()),
                "focus": float(self.focusMotor.getPosition()),
                "phiy": float(self.phiyMotor.getPosition()),
                "phiz": float(self.phizMotor.getPosition()),
                "sampx": float(self.sampleXMotor.getPosition()),
                "sampy": float(self.sampleYMotor.getPosition()),
                "zoom": float(self.zoomMotor.getPosition()),
                "kappa":  float(self.sampleYMotor.getPosition()) if self.in_kappa_mode() else None,
                "kappa_phi": float(self.zoomMotor.getPosition()) if self.in_kappa_mode() else None,
        }
        if self.in_kappa_mode() == True:
            pos.update({"kappa": float(self.kappaMotor.getPosition()), "kappa_phi": float(self.kappaPhiMotor.getPosition())})
        return pos

    def moveMotors(self, roles_positions_dict):
        if not self.in_kappa_mode():
            try:
                roles_positions_dict.pop["kappa"]
                roles_positions_dict.pop["kappa_phi"]
            except:
                pass
            
        self.moveSyncMotors(roles_positions_dict, wait=True)

    def start3ClickCentring(self, sample_info=None):
        if self.in_plate_mode():
            plateTranslation = self.getDeviceByRole('plateTranslation')
            cmd_set_plate_vertical = self.addCommand({"type":"exporter", "exporter_address":self.exporter_addr, "name":"plate_vertical" }, "setPlateVertical")
            low_lim, high_lim = self.phiMotor.getDynamicLimits()
            phi_range = math.fabs(high_lim - low_lim -1)

            self.currentCentringProcedure = sample_centring.start_plate({"phi":self.centringPhi,
                                                                         "phiy":self.centringPhiy,
                                                                         "sampx": self.centringSamplex,
                                                                         "sampy": self.centringSampley,
                                                                         "phiz": self.centringPhiz,
                                                                         "plateTranslation": plateTranslation}, 
                                                                        self.pixelsPerMmY, self.pixelsPerMmZ, 
                                                                        self.getBeamPosX(), self.getBeamPosY(),
                                                                        cmd_set_plate_vertical,
                                                                        phi_range = phi_range,lim_pos=high_lim-0.5)
        else:
            self.currentCentringProcedure = sample_centring.start({"phi":self.centringPhi,
                                                                   "phiy":self.centringPhiy,
                                                                   "sampx": self.centringSamplex,
                                                                   "sampy": self.centringSampley,
                                                                   "phiz": self.centringPhiz }, 
                                                                  self.pixelsPerMmY, self.pixelsPerMmZ, 
                                                                  self.getBeamPosX(), self.getBeamPosY())
                                                                         
        self.currentCentringProcedure.link(self.manualCentringDone)

def set_light_in(light, light_motor, zoom):
    MICRODIFF.getDeviceByRole("flight").move(0)
    MICRODIFF.getDeviceByRole("lightInOut").actuatorIn()

MiniDiff.set_light_in = set_light_in