Skip to content

Latest commit

 

History

History
348 lines (242 loc) · 12.8 KB

Installation_Debian.md

File metadata and controls

348 lines (242 loc) · 12.8 KB

This guide covers manual installation of the OV500 VoIP billing software on Debian 11.

Tested using the following software:

Debian 11 (Bullseye) x64 minimal install
OV500 v2
Kamailio 5.6
Freeswitch 1.10
Nginx 1.18
PHP 8.1
MariaDB 10

Block diagram

Prerequisites

Verify locale is set to C.UTF-8 or en US.UTF-8.

locale

If it is not then set it now. You may also set your own UTF-8 locale.

# Select C.UTF-8 UTF-8
apt update && apt -y install locales && dpkg-reconfigure locales

Log out/in or close/open shell for changes to take effect.

Install some basic prerequisites

apt update && apt -y upgrade && apt -y remove apache2    
apt update && apt -y install git nano dbus sudo nginx wget curl sqlite3 dirmngr postfix gawk dnsutils openssl ntp unixodbc unixodbc-dev net-tools whois sensible-mda mlocate vim gettext fail2ban ntpdate ntp lua5.4 mariadb-server mariadb-client odbc-mariadb

Postfix

If a postfix configuration wizard pops up you can select the default Internet Site and also the default mail name. These settings can be manually changed later in /etc/postfix/main.cf.

PHP

# install this section one line at a time.
apt -y install gnupg2 apt-transport-https ca-certificates software-properties-common
wget -O /etc/apt/trusted.gpg.d/php.gpg https://packages.sury.org/php/apt.gpg
echo "deb https://packages.sury.org/php/ $(lsb_release -sc) main" > /etc/apt/sources.list.d/php.list    
apt update && apt -y install php8.1 php8.1-fpm php8.1-mysql php8.1-cli php8.1-readline php8.1-xml php8.1-curl php8.1-gd php8.1-mbstring php8.1-opcache
update-alternatives --set php /usr/bin/php8.1

Disable Firewall

It is sometimes helpful to disable the firewall during installation.

systemctl disable firewalld
systemctl disable iptables
systemctl stop firewalld
systemctl stop iptables

Timezone

## FIND YOUR TIMEZONE
tzselect

## SET TIMEZONE EXAMPLE
timedatectl set-timezone America/Vancouver

## CHECK TIMEZONE
timedatectl status

systemctl restart rsyslog

Install

Kamailio

wget -O- http://deb.kamailio.org/kamailiodebkey.gpg | sudo apt-key add -
echo "deb http://deb.kamailio.org/kamailio56 $(lsb_release -sc) main" > /etc/apt/sources.list.d/kamailio56.list
echo "deb-src http://deb.kamailio.org/kamailio56 $(lsb_release -sc) main" >> /etc/apt/sources.list.d/kamailio56.list

apt update && apt -y install kamailio kamailio*    

Freeswitch

Get your signalwire token according to these instructions: https://freeswitch.org/confluence/display/FREESWITCH/HOWTO+Create+a+SignalWire+Personal+Access+Token

Once you have your signalwire token install freeswitch packages

TOKEN=YOURSIGNALWIRETOKEN

apt-get update && apt-get install -y gnupg2 wget lsb-release
wget --http-user=signalwire --http-password=$TOKEN -O /usr/share/keyrings/signalwire-freeswitch-repo.gpg https://freeswitch.signalwire.com/repo/deb/debian-release/signalwire-freeswitch-repo.gpg
echo "machine freeswitch.signalwire.com login signalwire password $TOKEN" > /etc/apt/auth.conf
echo "deb [signed-by=/usr/share/keyrings/signalwire-freeswitch-repo.gpg] https://freeswitch.signalwire.com/repo/deb/debian-release/ `lsb_release -sc` main" > /etc/apt/sources.list.d/freeswitch.list
echo "deb-src [signed-by=/usr/share/keyrings/signalwire-freeswitch-repo.gpg] https://freeswitch.signalwire.com/repo/deb/debian-release/ `lsb_release -sc` main" >> /etc/apt/sources.list.d/freeswitch.list
apt update && apt install -y freeswitch-meta-all

RTPProxy

This is installed on the same server as Kamailio if using multiple servers. cd /usr/src apt -y install make git clone -b v2.2.0 https://github.com/sippy/rtpproxy.git git -C rtpproxy submodule update --init --recursive cd rtpproxy ./configure make && make install

useradd -s /usr/sbin/nologin rtpproxy

cat >> /etc/systemd/system/rtpproxy.service << EOF

[Unit]
Description=RTPProxy media server
After=network.target
Requires=network.target

[Service]
Type=simple
PIDFile=/run/rtpproxy/rtpproxy.pid
Environment='OPTIONS=-f -L 4096 -l 0.0.0.0 -m 16384 -M 32768'

Restart=always
RestartSec=5

ExecStartPre=-/bin/mkdir /run/rtpproxy
ExecStartPre=-/bin/chown rtpproxy:rtpproxy /run/rtpproxy

ExecStart=/usr/local/bin/rtpproxy -p /run/rtpproxy/rtpproxy.pid -s udp:127.0.0.1:5899 \
-u rtpproxy:rtpproxy -n unix:/run/rtpproxy/rtpproxy_timeout.sock $OPTIONS

ExecStop=/usr/bin/pkill -F /run/rtpproxy/rtpproxy.pid
ExecStopPost=-/bin/rm -R /run/rtpproxy

StandardOutput=journal
StandardError=journal

TimeoutStartSec=10
TimeoutStopSec=10

[Install]
WantedBy=multi-user.target

EOF

systemctl daemon-reload
systemctl enable rtpproxy
systemctl start rtpproxy
systemctl status rtpproxy

OV500

Download

cd /usr/src
git clone -b 2.0.1 https://github.com/powerpbx/OV500.git

Web server

cp /usr/src/OV500/config/nginx/ov500.conf /etc/nginx/sites-available/ov500.conf
ln -s /etc/nginx/sites-available/ov500.conf /etc/nginx/sites-enabled/ov500.conf
rm /etc/nginx/sites-enabled/default

# Just press ENTER to use defaults for all the questions
mkdir -p /etc/nginx/ssl
openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout /etc/nginx/ssl/nginx.key -out /etc/nginx/ssl/nginx.crt

PHP-fpm

sed -i "s/;request_terminate_timeout = 0/request_terminate_timeout = 300/" /etc/php/8.1/fpm/pool.d/www.conf
sed -i "s#short_open_tag = Off#short_open_tag = On#g" /etc/php/8.1/fpm/php.ini
sed -i "s#;cgi.fix_pathinfo=1#cgi.fix_pathinfo=1#g" /etc/php/8.1/fpm/php.ini
sed -i "s/max_execution_time = 30/max_execution_time = 3000/" /etc/php/8.1/fpm/php.ini
sed -i "s/upload_max_filesize = 2M/upload_max_filesize = 20M/" /etc/php/8.1/fpm/php.ini
sed -i "s/post_max_size = 8M/post_max_size = 20M/" /etc/php/8.1/fpm/php.ini
sed -i "s/memory_limit = 128M/memory_limit = 512M/" /etc/php/8.1/fpm/php.ini

Enable web server changes

systemctl restart php8.1-fpm
systemctl restart nginx

Copy and configure files

cp -rf /usr/src/OV500/portal /var/www/html
chown -Rf www-data. /var/www/html
DBACCESS_KAMAILIO='mysql://ovswitch:ovswitch123@localhost/kamailio'
DBACCESS_SWITCH='mysql://ovswitch:ovswitch123@localhost/switch'
SQLCONCA='mysql://ovswitch:ovswitch123@localhost/switch'
DBCDRCA='mysql://ovswitch:ovswitch123@localhost/switchcdr'

SERVER_IP=$(ifconfig | sed -En 's/127.0.0.*//;s/.*inet (addr:)?(([0-9]*\.){3}[0-9]*).*/\2/p' | head -n1 | cut -d " " -f1)

mv /etc/kamailio /etc/kamailio.orig
cp -rf /usr/src/OV500/config/kamailio /etc

cd /etc/kamailio
sed -i "s/DBACCESS_KAMAILIO/${DBACCESS_KAMAILIO}/" kamailio.cfg
sed -i "s/DBACCESS_SWITCH/${DBACCESS_SWITCH}/" kamailio.cfg
sed -i "s/SQLCONCA/${SQLCONCA}/" kamailio.cfg
sed -i "s/DBCDRCA/${DBCDRCA}/" kamailio.cfg

sed -i "s/OV500LBIP/${SERVER_IP}/" /etc/kamailio/kamailio.cfg
# Where OV500LBIP is replaced with your Kamailio IP

sed -i "s/OV500FSIPADDRESS/${SERVER_IP}/" /etc/kamailio/dispatcher.list
# Where OV500FSIPADDRESS is replaced by your Freeswitch IP
# Also, add DID provider IP addresses to "dispatcher.list" under the relevant comment

cd /usr/src/OV500/config/freeswitch
cp -rf vars.xml /etc/freeswitch
cp -rf autoload_configs/acl.conf.xml /etc/freeswitch/autoload_configs
cp -rf autoload_configs/lua.conf.xml /etc/freeswitch/autoload_configs
cp -rf autoload_configs/modules.conf.xml /etc/freeswitch/autoload_configs
cp -rf autoload_configs/switch.conf.xml /etc/freeswitch/autoload_configs
cp -rf autoload_configs/xml_cdr.conf.xml /etc/freeswitch/autoload_configs
cp -rf autoload_configs/xml_curl.conf.xml /etc/freeswitch/autoload_configs
cp -rf sip_profiles/internal.xml /etc/freeswitch/sip_profiles

sed -i "s/OV500FSIPADDRESS/${SERVER_IP}/" /etc/freeswitch/vars.xml
sed -i "s/LBSERVERIP/${SERVER_IP}/" /etc/freeswitch/autoload_configs/acl.conf.xml
# Where OV500FSIPADDRESS is replaced by your Freeswitch IP and LBSERVERIP is replaced by your Kamailio IP

cp /usr/src/OV500/portal/api/lib/vm_user.lua /usr/share/freeswitch/scripts
# Line 40 provides the credentials for Freeswitch to connect to the DB via ODBC

Setup databases

mysqladmin create switch
mysqladmin create switchcdr
mysqladmin create kamailio

mysql -e "GRANT ALL PRIVILEGES ON *.* TO 'ovswitch'@'localhost' IDENTIFIED BY 'ovswitch123'";

mysql  switch < /usr/src/OV500/config/database/switch.sql
mysql  switchcdr < /usr/src/OV500/config/database/switchcdr.sql
mysql  kamailio < /usr/src/OV500/config/database/kamailio.sql
mysql  kamailio < /usr/src/OV500/config/database/kamailio-upg-44-to-56.sql

cat >> /etc/odbc.ini << EOF 
[freeswitch]
Driver = MariaDB Unicode
SERVER = localhost
PORT = 3306
DATABASE = switch
OPTION = 67108864
USER = ovswitch
PASSWORD = ovswitch123 

EOF

Test odbc driver

odbcinst -s -q

Test odbc connection

isql -v freeswitch ovswitch ovswitch123 
quit

Set ownership and permissions

Run this any time there are any changes/moves/adds/upgrades or if experiencing problems.

# Set owner and group to www-data
chown -R www-data. /etc/freeswitch /var/lib/freeswitch \
/var/log/freeswitch /usr/share/freeswitch \
/var/log/nginx /var/www/html/portal

# Directory permissions to 755 (u=rwx,g=rx,o='rx')
find /etc/freeswitch -type d -exec chmod 755 {} \;
find /var/lib/freeswitch -type d -exec chmod 755 {} \;
find /var/log/freeswitch -type d -exec chmod 755 {} \;
find /usr/share/freeswitch -type d -exec chmod 755 {} \;
find /var/www/html/portal -type d -exec chmod 755 {} \;

# File permissions to 644 (u=rw,g=r,o=r)
find /etc/freeswitch -type f -exec chmod 644 {} \;
find /var/lib/freeswitch -type f -exec chmod 644 {} \;
find /var/log/freeswitch -type f -exec chmod 644 {} \;
find /usr/share/freeswitch -type f -exec chmod 644 {} \;
find /var/www/html/portal -type f -exec chmod 644 {} \;

Configure firewall

apt -y install firewalld
systemctl enable firewalld
systemctl start firewalld

firewall-cmd --permanent --zone=public --add-service={http,https}
firewall-cmd --permanent --zone=public --add-port={5060,5061}/tcp
firewall-cmd --permanent --zone=public --add-port={5060,5061}/udp
firewall-cmd --permanent --zone=public --add-port=16384-32768/udp
firewall-cmd --reload
firewall-cmd --list-all

Configure log rotation

sed -i -e 's/daily/size 30M/g' /etc/logrotate.d/rsyslog
sed -i -e 's/weekly/size 30M/g' /etc/logrotate.d/rsyslog
sed -i -e 's/rotate 7/rotate 5/g' /etc/logrotate.d/rsyslog
sed -i -e 's/weekly/size 30M/g' /etc/logrotate.d/php8.1-fpm
sed -i -e 's/rotate 12/rotate 5/g' /etc/logrotate.d/php8.1-fpm
sed -i -e 's/daily/size 30M/g' /etc/logrotate.d/nginx
sed -i -e 's/rotate 14/rotate 5/g' /etc/logrotate.d/nginx
sed -i -e 's/weekly/size 30M/g' /etc/logrotate.d/fail2ban

Enable services

systemctl daemon-reload
systemctl enable freeswitch
systemctl restart freeswitch

Test Freeswitch console

If fs_cli command is not working change the following line.

nano +4 /etc/freeswitch/autoload_configs/event_socket.conf.xml

<param name="listen-ip" value="127.0.0.1"/>

systemctl restart freeswitch

Browse to control panel

https://x.x.x.x

username: admin
password: admin

Troubleshooting

The primary ways to troubleshoot are to watch the fs_cli command line in real time or to scan the log files, some of which duplicate that info. The fs_cli info is logged in /var/log/freeswitch.log. For Kamailio the command line is kamcli.

When troubleshooting it is also sometimes helpful to enable debugging. There are at least 2 separate debugging settings in OV500.

The first place to start would usually be to set

/var/www/html/portal/application/config/config.php > $config['log_threshold'] = 2

Any setting above 0 creates a date stamped log file at

/var/www/html/portal/application/logs/

which shows all the PHP code being initialized and any errors in that code. This should only be enabled temporarily as the log files are not automatically deleted. There may also be some sensitive information in those files.

The second way to enable debugging is at the top of

/var/www/html/portal/index.php

Comment out the production line and uncomment the following development line.

define('ENVIRONMENT', isset($_SERVER['CI_ENV']) ? $_SERVER['CI_ENV'] : 'development');

This allows you to see the PHP errors in a web browser as they happen instead of just in the log files.