build_hiawatha

#!/bin/sh
#*******************************************************************************
#     COMPILE HIAWATA
#
# References:
#
# How to compile and install Hiawatha from source:
# 
# <http://www.hiawatha-webserver.org/howto/compilation_and_installation>
#
# CMake Cross Compile Wiki Page
#
# <http://www.cmake.org/Wiki/CMake_Cross_Compiling>
#
# Great reference on cross-compiling using cmake is here:
#
# <http://blog.beuc.net/posts/Cross-compiling_with_CMake/>
#
#*******************************************************************************
# as normal user on linux pc terminal:

echo
echo -------------------------------------------------------------------------------
echo BUILDING HIAWATHA
echo -------------------------------------------------------------------------------
echo
sleep 1

project=`pwd`

echo ${project}

. ./env_setup

echo ${AM1808_COMPILER}

PATH=${AM1808_COMPILER}:$PATH

echo ${PATH}
 
cd ../hiawatha-9.3

echo "Now we're in $(pwd)"

# No need to set up PATH here, the env_setup script does that for us
# PATH=/usr/src/ndk-standalone-9/bin:$PATH

# No need to cd to the build directory, we just did that!
# cd /usr/src/freeglut-3.0.0/

mkdir -p cross-ev3/ && cd cross-ev3/
cmake \
  -D CMAKE_TOOLCHAIN_FILE=${project}/../ev3dev/ev3dev_toolchain.cmake \
  -D ENABLE_DEBUG=on                                \
  -D ENABLE_IPV6=off                                \
  -D ENABLE_SSL=off                                 \
  -D ENABLE_XSLT=off                                \
  ..
make
#  make install DESTDIR=$(pwd)


# arm-none-eabi-gcc -v
# 
# if [ "$1" = "clean" ]
# then
#   make distclean ARCH=arm CROSS_COMPILE=${AM1808_ABI}
# fi
# 
# cp ${project}/ev3dev.config ${AM1808_KERNEL}/.config
# 
# echo "CROSS COMPILING KERNEL"
# 
# make ARCH=arm CROSS_COMPILE=${AM1808_ABI}
# 
# echo "BUILDING BOOTABLE IMAGE"
# 
# make -j4 uImage ARCH=arm CROSS_COMPILE=${AM1808_ABI}
# 
# echo "COPYING BOOTABLE IMAGE TO LOCAL DIRECTORY"
# 
# cp ${AM1808_KERNEL}/arch/arm/boot/uImage ${project}/uImage
#