ESP32-C3 - Version 3.0 breaks BLEHIDDevice LEDs events (Caps Lock, Num Lock, etc.)

[GiyeopKim1993]

Board

ESP32-C3

Device Description

Geekble Mini ESP-C3
it should work on any ESP32-C3 with BT connection.

Hardware Configuration

D9 is pullup button.
usb serial connected pc.

Version

v3.0.0

IDE Name

ArduinoIED

Operating System

macOS

Flash frequency

?

PSRAM enabled

yes

Upload speed

115200

Description

LED events work correctly on WINDOWS and ANDROID, but they do not function on macOS.

Please check if this issue is the same as the one where LED events did not work when using USB with QMK, TinyUSB, etc.

Sketch

/* 
 * Sample program for ESP32 acting as a Bluetooth keyboard
 * 
 * Copyright (c) 2019 Manuel Bl
 * 
 * Licensed under MIT License
 * https://opensource.org/licenses/MIT
 */

//
// This program lets an ESP32 act as a keyboard connected via Bluetooth.
// When a button attached to the ESP32 is pressed, it will generate the key strokes for a message.
//
// For the setup, a momentary button should be connected to pin 2 and to ground.
// Pin 2 will be configured as an input with pull-up.
//
// In order to receive the message, add the ESP32 as a Bluetooth keyboard of your computer
// or mobile phone:
//
// 1. Go to your computers/phones settings
// 2. Ensure Bluetooth is turned on
// 3. Scan for Bluetooth devices
// 4. Connect to the device called "ESP32 Keyboard"
// 5. Open an empty document in a text editor
// 6. Press the button attached to the ESP32

#define US_KEYBOARD 1

#include <Arduino.h>
#include "BLEDevice.h"
#include "BLEHIDDevice.h"
#include "HIDTypes.h"
#include "HIDKeyboardTypes.h"


// Change the below values if desired
#define BUTTON_PIN SW_BUILTIN
#define MESSAGE "Hello from ESP32\n"
#define DEVICE_NAME "Geekble Keyboard"


// Forward declarations
void bluetoothTask(void*);
void typeText(const char* text);


bool isBleConnected = false;


void setup() {
    Serial.begin(115200);

    // configure pin for button
    pinMode(BUTTON_PIN, INPUT_PULLUP);

    // start Bluetooth task
    xTaskCreate(bluetoothTask, "bluetooth", 20000, NULL, 5, NULL);
}


void loop() {  
    if (isBleConnected && digitalRead(BUTTON_PIN) == LOW) {
        // button has been pressed: type message
        Serial.println(MESSAGE);
        typeText(MESSAGE);
    }

    delay(100);
}


// Message (report) sent when a key is pressed or released
struct InputReport {
    uint8_t modifiers;	     // bitmask: CTRL = 1, SHIFT = 2, ALT = 4
    uint8_t reserved;        // must be 0
    uint8_t pressedKeys[6];  // up to six concurrenlty pressed keys
};

// Message (report) received when an LED's state changed
struct OutputReport {
    uint8_t leds;            // bitmask: num lock = 1, caps lock = 2, scroll lock = 4, compose = 8, kana = 16
};


// The report map describes the HID device (a keyboard in this case) and
// the messages (reports in HID terms) sent and received.
static const uint8_t REPORT_MAP[] = {
    USAGE_PAGE(1),      0x01,       // Generic Desktop Controls
    USAGE(1),           0x06,       // Keyboard
    COLLECTION(1),      0x01,       // Application
    REPORT_ID(1),       0x01,       //   Report ID (1)
    USAGE_PAGE(1),      0x07,       //   Keyboard/Keypad
    USAGE_MINIMUM(1),   0xE0,       //   Keyboard Left Control
    USAGE_MAXIMUM(1),   0xE7,       //   Keyboard Right Control
    LOGICAL_MINIMUM(1), 0x00,       //   Each bit is either 0 or 1
    LOGICAL_MAXIMUM(1), 0x01,
    REPORT_COUNT(1),    0x08,       //   8 bits for the modifier keys
    REPORT_SIZE(1),     0x01,       
    HIDINPUT(1),        0x02,       //   Data, Var, Abs
    REPORT_COUNT(1),    0x01,       //   1 byte (unused)
    REPORT_SIZE(1),     0x08,
    HIDINPUT(1),        0x01,       //   Const, Array, Abs
    REPORT_COUNT(1),    0x06,       //   6 bytes (for up to 6 concurrently pressed keys)
    REPORT_SIZE(1),     0x08,
    LOGICAL_MINIMUM(1), 0x00,
    LOGICAL_MAXIMUM(1), 0x65,       //   101 keys
    USAGE_MINIMUM(1),   0x00,
    USAGE_MAXIMUM(1),   0x65,
    HIDINPUT(1),        0x00,       //   Data, Array, Abs
    REPORT_COUNT(1),    0x05,       //   5 bits (Num lock, Caps lock, Scroll lock, Compose, Kana)
    REPORT_SIZE(1),     0x01,
    USAGE_PAGE(1),      0x08,       //   LEDs
    USAGE_MINIMUM(1),   0x01,       //   Num Lock
    USAGE_MAXIMUM(1),   0x05,       //   Kana
    LOGICAL_MINIMUM(1), 0x00,
    LOGICAL_MAXIMUM(1), 0x01,
    HIDOUTPUT(1),       0x02,       //   Data, Var, Abs
    REPORT_COUNT(1),    0x01,       //   3 bits (Padding)
    REPORT_SIZE(1),     0x03,
    HIDOUTPUT(1),       0x01,       //   Const, Array, Abs
    END_COLLECTION(0)               // End application collection
};


BLEHIDDevice* hid;
BLECharacteristic* input;
BLECharacteristic* output;

const InputReport NO_KEY_PRESSED = { };


/*
 * Callbacks related to BLE connection
 */
class BleKeyboardCallbacks : public BLEServerCallbacks {

    void onConnect(BLEServer* server) {
        isBleConnected = true;

        // Allow notifications for characteristics
        BLE2902* cccDesc = (BLE2902*)input->getDescriptorByUUID(BLEUUID((uint16_t)0x2902));
        cccDesc->setNotifications(true);

        Serial.println("Client has connected");
    }

    void onDisconnect(BLEServer* server) {
        isBleConnected = false;

        // Disallow notifications for characteristics
        BLE2902* cccDesc = (BLE2902*)input->getDescriptorByUUID(BLEUUID((uint16_t)0x2902));
        cccDesc->setNotifications(false);

        Serial.println("Client has disconnected");
    }
};


/*
 * Called when the client (computer, smart phone) wants to turn on or off
 * the LEDs in the keyboard.
 * 
 * bit 0 - NUM LOCK
 * bit 1 - CAPS LOCK
 * bit 2 - SCROLL LOCK
 */
 class OutputCallbacks : public BLECharacteristicCallbacks {
    void onWrite(BLECharacteristic* characteristic) {
        OutputReport* report = (OutputReport*) characteristic->getData();
        Serial.print("LED state: ");
        Serial.print((int) report->leds);
        Serial.println();
    }
};


void bluetoothTask(void*) {

    // initialize the device
    BLEDevice::init(DEVICE_NAME);
    BLEServer* server = BLEDevice::createServer();
    server->setCallbacks(new BleKeyboardCallbacks());

    // create an HID device
    hid = new BLEHIDDevice(server);
    input = hid->inputReport(1); // report ID
    output = hid->outputReport(1); // report ID
    output->setCallbacks(new OutputCallbacks());

    // set manufacturer name
    hid->manufacturer()->setValue("Maker Community");
    // set USB vendor and product ID
    hid->pnp(0x02, 0xe502, 0xa111, 0x0210);
    // information about HID device: device is not localized, device can be connected
    hid->hidInfo(0x00, 0x02);

    // Security: device requires bonding
    BLESecurity* security = new BLESecurity();
    security->setAuthenticationMode(ESP_LE_AUTH_BOND);

    // set report map
    hid->reportMap((uint8_t*)REPORT_MAP, sizeof(REPORT_MAP));
    hid->startServices();

    // set battery level to 100%
    hid->setBatteryLevel(100);

    // advertise the services
    BLEAdvertising* advertising = server->getAdvertising();
    advertising->setAppearance(HID_KEYBOARD);
    advertising->addServiceUUID(hid->hidService()->getUUID());
    advertising->addServiceUUID(hid->deviceInfo()->getUUID());
    advertising->addServiceUUID(hid->batteryService()->getUUID());
    advertising->start();

    Serial.println("BLE ready");
    delay(portMAX_DELAY);
};


void typeText(const char* text) {
    int len = strlen(text);
    for (int i = 0; i < len; i++) {

        // translate character to key combination
        uint8_t val = (uint8_t)text[i];
        if (val > KEYMAP_SIZE)
            continue; // character not available on keyboard - skip
        KEYMAP map = keymap[val];

        // create input report
        InputReport report = {
            .modifiers = map.modifier,
            .reserved = 0,
            .pressedKeys = {
                map.usage,
                0, 0, 0, 0, 0
            }
        };

        // send the input report
        input->setValue((uint8_t*)&report, sizeof(report));
        input->notify();

        delay(5);

        // release all keys between two characters; otherwise two identical
        // consecutive characters are treated as just one key press
        input->setValue((uint8_t*)&NO_KEY_PRESSED, sizeof(NO_KEY_PRESSED));
        input->notify();

        delay(5);
    }
}

Debug Message

.

Other Steps to Reproduce

No response

I have checked existing issues, online documentation and the Troubleshooting Guide

• I confirm I have checked existing issues, online documentation and Troubleshooting guide.

[SuGlider]

@GiyeopKim1993 - This has been fixed by #10398
Please try the patch and let me know. Thanks.

[GiyeopKim1993]

@SuGlider
Thanks for your answer.
But that is only usb hid. Ble hid still not work.