Connecting Failed, Unknown Proxy Host

[Gangkiller25]

Playing on a All the mods 9 server and whenever I try to use pastebin program its fails to connect then says unknown proxy host. I tried these setting in singleplayer and it worked but the server doesnt seem to work with it
Tried to whitelist pastebin also, with no luck.
HTTP/Proxy setting

#Controls the HTTP API
[http]
	#Enable the "http" API on Computers. Disabling this also disables the "pastebin" and
	#"wget" programs, that many users rely on. It's recommended to leave this on and use
	#the "rules" config option to impose more fine-grained control.
	enabled = true
	#Enable use of http websockets. This requires the "http_enable" option to also be true.
	websocket_enabled = true
	#The number of http requests a computer can make at one time. Additional requests
	#will be queued, and sent when the running requests have finished. Set to 0 for
	#unlimited.
	#Range: > 0
	max_requests = 16
	#The number of websockets a computer can have open at one time. Set to 0 for unlimited.
	#Range: > 1
	max_websockets = 4

	#Limits bandwidth used by computers.
	[http.bandwidth]
		#The number of bytes which can be downloaded in a second. This is shared across all computers. (bytes/s).
		#Range: > 1
		global_download = 33554432
		#The number of bytes which can be uploaded in a second. This is shared across all computers. (bytes/s).
		#Range: > 1
		global_upload = 33554432

	#Tunnels HTTP and websocket requests through a proxy server. Only affects HTTP
	#rules with "use_proxy" set to true (off by default).
	#If authentication is required for the proxy, create a "computercraft-proxy.pw"
	#file in the same directory as "computercraft-server.toml", containing the
	#username and password separated by a colon, e.g. "myuser:mypassword". For
	#SOCKS4 proxies only the username is required.
	[http.proxy]
		#The type of proxy to use.
		#Allowed Values: HTTP, HTTPS, SOCKS4, SOCKS5
		type = "HTTP"
		#The hostname or IP address of the proxy server.
		host = ""
		#The port of the proxy server.
		#Range: 1 ~ 65536
		port = 8080

	#A list of rules which control behaviour of the "http" API for specific domains or
	#IPs. Each rule matches against a hostname and an optional port, and then sets several
	#properties for the request.  Rules are evaluated in order, meaning earlier rules override
	#later ones.
	#
	#Valid properties:
	# - "host" (required): The domain or IP address this rule matches. This may be a domain name
	#   ("pastebin.com"), wildcard ("*.pastebin.com") or CIDR notation ("127.0.0.0/8").
	# - "port" (optional): Only match requests for a specific port, such as 80 or 443.
	#
	# - "action" (optional): Whether to allow or deny this request.
	# - "max_download" (optional): The maximum size (in bytes) that a computer can download in this
	#   request.
	# - "max_upload" (optional): The maximum size (in bytes) that a computer can upload in a this request.
	# - "max_websocket_message" (optional): The maximum size (in bytes) that a computer can send or
	#   receive in one websocket packet.
	# - "use_proxy" (optional): Enable use of the HTTP/SOCKS proxy if it is configured.
	[[http.rules]]
		host = "$private"
		action = "deny"

	[[http.rules]]
		#The maximum size (in bytes) that a computer can send or receive in one websocket packet.
		max_websocket_message = 131072
		host = "*"
		#The maximum size (in bytes) that a computer can upload in a single request. This
		#includes headers and POST text.
		max_upload = 4194304
		action = "allow"
		#Enable use of the HTTP/SOCKS proxy if it is configured.
		use_proxy = false
		#The maximum size (in bytes) that a computer can download in a single request.
		#Note that responses may receive more data than allowed, but this data will not
		#be returned to the client.
		max_download = 16777216

[john13210]

TO THE ONE WHO MAKE CONFIG FILES PLS DELETE THE ONE IN DEFAULTCONFIGS THIS WILL NOT CHANGE SHIT

and to the ones with this problem go to /world/serverconfig/computercraft-server.toml and change the things there

this worked for what i needed :

computercraft-server.toml thats in /world/serverconfig

#The disk space limit for computers and turtles, in bytes.
computer_space_limit = 1000000
#The disk space limit for floppy disks, in bytes.
floppy_space_limit = 125000
#The file upload size limit, in bytes. Must be in range of 1 KiB and 16 MiB.
#Keep in mind that uploads are processed in a single tick - large files or
#poor network performance can stall the networking thread. And mind the disk space!
#Range: 1024 ~ 16777216
upload_max_size = 524288
#Set how many files a computer can have open at the same time. Set to 0 for unlimited.
#Range: > 0
maximum_open_files = 128
#A comma separated list of default system settings to set on new computers.
#Example: "shell.autocomplete=false,lua.autocomplete=false,edit.autocomplete=false"
#will disable all autocompletion.
default_computer_settings = ""
#Log exceptions thrown by peripherals and other Lua objects. This makes it easier
#for mod authors to debug problems, but may result in log spam should people use
#buggy methods.
log_computer_errors = true
#Require players to be in creative mode and be opped in order to interact with
#command computers. This is the default behaviour for vanilla's Command blocks.
command_require_creative = true
#A list of generic methods or method sources to disable. Generic methods are
#methods added to a block/block entity when there is no explicit peripheral
#provider. This includes inventory methods (i.e. inventory.getItemDetail,
#inventory.pushItems), and (if on Forge), the fluid_storage and energy_storage
#methods.
#Methods in this list can either be a whole group of methods (computercraft:inventory)
#or a single method (computercraft:inventory#pushItems).

disabled_generic_methods = []

#Controls execution behaviour of computers. This is largely intended for
#fine-tuning servers, and generally shouldn't need to be touched.
[execution]
#Set the number of threads computers can run on. A higher number means more
#computers can run at once, but may induce lag. Please note that some mods may
#not work with a thread count higher than 1. Use with caution.
#Range: > 1
computer_threads = 1
#The maximum time that can be spent executing tasks in a single tick, in
#milliseconds.
#Note, we will quite possibly go over this limit, as there's no way to tell how
#long a will take - this aims to be the upper bound of the average time.
#Range: > 1
max_main_global_time = 10
#The ideal maximum time a computer can execute for in a tick, in milliseconds.
#Note, we will quite possibly go over this limit, as there's no way to tell how
#long a will take - this aims to be the upper bound of the average time.
#Range: > 1
max_main_computer_time = 5

#Controls the HTTP API
[http]
#Enable the "http" API on Computers. Disabling this also disables the "pastebin" and
#"wget" programs, that many users rely on. It's recommended to leave this on and use
#the "rules" config option to impose more fine-grained control.
enabled = true
#Enable use of http websockets. This requires the "http_enable" option to also be true.
websocket_enabled = true
#The number of http requests a computer can make at one time. Additional requests
#will be queued, and sent when the running requests have finished. Set to 0 for
#unlimited.
#Range: > 0
max_requests = 16
#The number of websockets a computer can have open at one time. Set to 0 for unlimited.
#Range: > 1
max_websockets = 4

#Limits bandwidth used by computers.
[http.bandwidth]
	#The number of bytes which can be downloaded in a second. This is shared across all computers. (bytes/s).
	#Range: > 1
	global_download = 33554432
	#The number of bytes which can be uploaded in a second. This is shared across all computers. (bytes/s).
	#Range: > 1
	global_upload = 33554432

#Tunnels HTTP and websocket requests through a proxy server. Only affects HTTP
#rules with "use_proxy" set to true (off by default).
#If authentication is required for the proxy, create a "computercraft-proxy.pw"
#file in the same directory as "computercraft-server.toml", containing the
#username and password separated by a colon, e.g. "myuser:mypassword". For
#SOCKS4 proxies only the username is required.
[http.proxy]
	#The type of proxy to use.
	#Allowed Values: HTTP, HTTPS, SOCKS4, SOCKS5
	type = "HTTP"
	#The hostname or IP address of the proxy server.
	host = ""
	#The port of the proxy server.
	#Range: 1 ~ 65536
	port = 8080

#A list of rules which control behaviour of the "http" API for specific domains or
#IPs. Each rule matches against a hostname and an optional port, and then sets several
#properties for the request.  Rules are evaluated in order, meaning earlier rules override
#later ones.
#
#Valid properties:
# - "host" (required): The domain or IP address this rule matches. This may be a domain name
#   ("pastebin.com"), wildcard ("*.pastebin.com") or CIDR notation ("127.0.0.0/8").
# - "port" (optional): Only match requests for a specific port, such as 80 or 443.
#
# - "action" (optional): Whether to allow or deny this request.
# - "max_download" (optional): The maximum size (in bytes) that a computer can download in this
#   request.
# - "max_upload" (optional): The maximum size (in bytes) that a computer can upload in a this request.
# - "max_websocket_message" (optional): The maximum size (in bytes) that a computer can send or
#   receive in one websocket packet.
# - "use_proxy" (optional): Enable use of the HTTP/SOCKS proxy if it is configured.
[[http.rules]]
	host = "$private"
	action = "deny"

[[http.rules]]
	#The maximum size (in bytes) that a computer can send or receive in one websocket packet.
	max_websocket_message = 131072
	host = "*"
	#The maximum size (in bytes) that a computer can upload in a single request. This
	#includes headers and POST text.
	max_upload = 4194304
	action = "allow"
	#Enable use of the HTTP/SOCKS proxy if it is configured.
	use_proxy = false
	#The maximum size (in bytes) that a computer can download in a single request.
	#Note that responses may receive more data than allowed, but this data will not
	#be returned to the client.
	max_download = 16777216

#Various options relating to peripherals.
[peripheral]
#Enable Command Block peripheral support
command_block_enabled = false
#The range of Wireless Modems at low altitude in clear weather, in meters.
#Range: 0 ~ 100000
modem_range = 64
#The range of Wireless Modems at maximum altitude in clear weather, in meters.
#Range: 0 ~ 100000
modem_high_altitude_range = 384
#The range of Wireless Modems at low altitude in stormy weather, in meters.
#Range: 0 ~ 100000
modem_range_during_storm = 64
#The range of Wireless Modems at maximum altitude in stormy weather, in meters.
#Range: 0 ~ 100000
modem_high_altitude_range_during_storm = 384
#Maximum amount of notes a speaker can play at once.
#Range: > 1
max_notes_per_tick = 8
#The limit to how much monitor data can be sent per tick. Note:
# - Bandwidth is measured before compression, so the data sent to the client is
# smaller.
# - This ignores the number of players a packet is sent to. Updating a monitor for
# one player consumes the same bandwidth limit as sending to 20.
# - A full sized monitor sends ~25kb of data. So the default (1MB) allows for ~40
# monitors to be updated in a single tick.
#Set to 0 to disable.
#Range: > 0
monitor_bandwidth = 1000000

#Various options relating to turtles.
[turtle]
#Set whether Turtles require fuel to move.
need_fuel = true
#The fuel limit for Turtles.
#Range: > 0
normal_fuel_limit = 20000
#The fuel limit for Advanced Turtles.
#Range: > 0
advanced_fuel_limit = 100000
#If set to true, Turtles will push entities out of the way instead of stopping if
#there is space to do so.
can_push = true

#Configure the size of various computer's terminals.
#Larger terminals require more bandwidth, so use with care.
[term_sizes]

#Terminal size of computers.
[term_sizes.computer]
	#Range: 1 ~ 255
	width = 51
	#Range: 1 ~ 255
	height = 19

#Terminal size of pocket computers.
[term_sizes.pocket_computer]
	#Range: 1 ~ 255
	width = 26
	#Range: 1 ~ 255
	height = 20

#Maximum size of monitors (in blocks).
[term_sizes.monitor]
	#Range: 1 ~ 32
	width = 8
	#Range: 1 ~ 32
	height = 6

[fatboychummy]

Please wrap your config file in the following so as to not be a gigantic wall of text (and for proper formatting):

<details> <summary>logfile</summary>

```
your log file here
```
</details>

i.e:

logfile

your log file here

[fatboychummy]

Also, the defaultconfig folder exists for a reason, I highly recommend not deleting them. Instead just make sure you're editing the right files.

[fatboychummy]

It is very likely you are editing the defaultconfig instead of your serverconfig folder (or potentially the root serverconfig folder, iirc when I set up my atm9 server there were two serverconfig folders). Make sure you open your world folder then go to serverconfig.

i.e: If your server root (where your server.jar is located) is /mcserver/, make sure you're editing /mcserver/worldname/serverconfig/computercraft-server.toml, and not /mcserver/defaultconfig/computercraft-server.toml (or /mcserver/serverconfig/computercraft-server.toml).