#Raspberry Pi
###How to setup the Raspberry Pi
Download a Noobs Package from here.
Install Jessie.
And wait.
Once the sd card is ready and the system has rebooted.
open the Raspberry Pi Config screen
sudo raspi-config
and expand the filesytem and reboot.
You will need a few extra packages to build the RPi application.
Copy the getrepos.sh file and place it inside the addons folder of your openFrameworks folder.
Run the script by navigating to the addons folder and entering the following command into Terminal
./getrepos.sh.
This will pull down the required packages.
Then ensure you have pulled the latest versions of the addons using the script above.
Please run the following.
sudo apt-get update
sudo apt-get upgrade
sudo raspi-update
sudo raspi-config
Enable Camera
and Reboot.
Test the camera is working.
raspistill -o testimage.jpg
You will also need to update your Pi
sudo apt-get update
sudo apt-get upgrade
sudo raspi-update
Assuming you have built and compiled oF.